4 ms·

How do you carve solid wood board ? I've done ten's of carving by gluing thin layers in a mold to create carved plywood. Those are extra strong but required to

How do you carve solid wood board ? I've done ten's of carving by gluing thin layers in a mold to create carved plywood. Those are extra strong but required to use quite a lot of glue and get the right thickness wood veneers. Would love to learn the solid board way. edit: fined tuned my English today: seems carving means sculpting and not bending.

Someone 1y ago
Bending solid wood is something you do while it grows. See for example https://fullgrown.co.uk/ https://fullgrown.co.uk/, https://en.wikipedia.org/wiki/Espalier https://en.wikipedia.org/wiki/Espalier or https://www.core77.com/posts/27263/Polands-Forgotten-Crooked-Forest-What-Were-They-Going-to-Build-With-These-Strange-Trees https://www.core77.com/posts/27263/Polands-Forgotten-Crooked...
phito 1y ago
I've seen people doing it with steam
- shaftway 1y ago
  And you can bend surprisingly thick wood with steam. I attended a demonstration where someone bent a maple 2 by 4 (1.5" x 3.5"). It took about 6 people and two tries (the first one splintered, probably not steamed enough).
bradly 1y ago
In my chairs I just sculpt the back out of eight quarter with an angle grinder. More production focused wood workers are using multi-axis routers/cncs. The english term for what you are referring to in bent lamination which is done by taking a piece of wood, slicing it to sections with a thin kerf blade, soaking in water, and then clamping to a form and gluing back together. This is how Russ Filbeck creates his classic presidential rocker.
hcarvalhoalves 1y ago
The traditional methods of "carving" I know about are using an adze [1] and controlled burning [2]. [1] https://engineeringlearn.com/wp-content/uploads/2021/07/Adze-1.jpg.webp https://engineeringlearn.com/wp-content/uploads/2021/07/Adze... [2] https://www.youtube.com/shorts/dwAu6RIQURo https://www.youtube.com/shorts/dwAu6RIQURo

Someone 1y ago

Bending solid wood is something you do while it grows. See for example https://fullgrown.co.uk/ https://fullgrown.co.uk/, https://en.wikipedia.org/wiki/Espalier https://en.wikipedia.org/wiki/Espalier or https://www.core77.com/posts/27263/Polands-Forgotten-Crooked-Forest-What-Were-They-Going-to-Build-With-These-Strange-Trees https://www.core77.com/posts/27263/Polands-Forgotten-Crooked...

phito 1y ago

I've seen people doing it with steam

shaftway 1y ago
And you can bend surprisingly thick wood with steam. I attended a demonstration where someone bent a maple 2 by 4 (1.5" x 3.5"). It took about 6 people and two tries (the first one splintered, probably not steamed enough).

bradly 1y ago

In my chairs I just sculpt the back out of eight quarter with an angle grinder. More production focused wood workers are using multi-axis routers/cncs. The english term for what you are referring to in bent lamination which is done by taking a piece of wood, slicing it to sections with a thin kerf blade, soaking in water, and then clamping to a form and gluing back together. This is how Russ Filbeck creates his classic presidential rocker.

hcarvalhoalves 1y ago

The traditional methods of "carving" I know about are using an adze [1] and controlled burning [2]. [1] https://engineeringlearn.com/wp-content/uploads/2021/07/Adze-1.jpg.webp https://engineeringlearn.com/wp-content/uploads/2021/07/Adze... [2] https://www.youtube.com/shorts/dwAu6RIQURo https://www.youtube.com/shorts/dwAu6RIQURo