5 ms·
Behold the data tsunami: IEEE begins work on 400Gbps and 1Tbps Ethernet
- ajays 14y agoThe sad part is that on the consumer side, we are still paying what we were paying in 2005, for roughly the same amount of bandwidth. If consumer-side speeds kept a similar pace, either the costs should be halving every 18 months (modulo a certain fixed infrastructure cost), or the speeds should be doubling every 18 months at the same price point. Google Fiber is a great first step, but I think the only long-term viable solution is to have Municipal Fiber (in dense cities like SF and NY). There is no reason why we (I live in SF) should not have access to the same speeds as folks in Seoul and Tokyo, at similar prices. There's a nascent effort in SF to bring Municipal Fiber to the City (I am just a mailing list subscriber): http://sffiber.info/ http://sffiber.info/ It could sure use some love.
- rwmj 14y agoProfitability is doubling every 18 months though ...
- tedunangst 14y agohmm. http://www.comcast.com/About/PressRelease/PressReleaseDetail.ashx?PRID=284&SCRedirect=true http://www.comcast.com/About/PressRelease/PressReleaseDetail... In October 2003, Comcast doubled speeds from 1.5 to 3. $57 is about equivalent to today's 50Mbs plan. In theory, 9 years is 6 doubles (192Mbs), so they're about two doubles short of hitting the 18 month target, but they're actually ahead of schedule if you're willing to grant a two year timeline per double.
- ghshephard 14y agoIn the Bay area we are finally starting to see a bit of competition at the $70/month level. Comcast will either deliver you 30mbits/second or AT&T (if they've hooked up your neighborhood yet) - will send you 24mbits/second. I was paying $150/month for 2x64 ISDN in 1998/1999. So, my price went from .85 kilobits/1$ to 434 kilobits/1$. 500x increase in price performance in 13 years, which is a bit better than the expected 256x increase over 13 years. Things have plateaued recently - but I expect to see 1 Gigabit to the home to be pretty standard in the bay area by 2020 for $70 - which is completely in line with 18 month price performance doubling. (33x improvement) - it's just a little bursty.
- djtriptych 14y agoThe implications of this are fascinating to me. I'm really, really interested in how Comcast is going to figure out how to make sure the US never sees this technology widely deployed.
- ams6110 14y agoWell we're not still on dial-up are we?
- Lost_BiomedE 14y agoNo, but that was due to the '96 telecom act. They wanted it to be able to get into long distance, but that backfired. As soon as others started making meaningful inroads in deploying DSL, they were crushed. Essentially the cat was let out of the bag, but it did cost tax payers billions in subsidies for fiber to the home that never happened and the 'duopoly' of cable and DSL.
- cs702 14y agoClearly, there is pent-up demand from US businesses and consumers for such high speeds, but AFAIK the country's long-haul and last-mile infrastructure is nowhere near ready for handling end-user traffic at 400Gbps, let alone 1Tbps. On the long-haul side, service providers like Level 3 Communications appear unlikely to invest aggressively to add a lot more capacity any time soon, because they are still dealing with the financial consequences of their over-investment during the 1990's telecom boom (remember Worldcom?). On the last-mile side, service providers like Comcast also appear unlikely to invest aggressively to add a lot more capacity any time soon, because their traditional business models are under threat from companies like Netflix -- our last-mile providers fear higher speeds. So, we have demand for ever-faster speeds on one hand, and constrained supply on the other hand. Economics 101 suggests Internet service pricing is bound to stabilize or even (gasp!) increase over the coming years.
- noselasd 14y agoStill, the short haul market is also huge. There are _a lot_ of data centers around. If you got a top of the rack switch serving 40 machines each with 10Gb ethernet, you want more than a 100Gb uplink.
- amalcon 14y agoThis is not for end users, it's for datacenters. Consumer hardware never has fiber ethernet as it is, because there's simply no need. Not only do consumers have no use for that amount of bandwidth, typical hardware has trouble saturating a gigabit connection anyway. Adding more unusable bandwidth isn't going to help. Of course, for some crazy reason consumer hardware often has fiber audio jacks. People are weird. In core routers, the landscape is entirely different. It's actually very easy to saturate a 40-gig connection coming out of a major interchange, and there are lots of BGP tricks to work around that. Individual ISPs routinely only have one, for political reasons. It would be difficult to saturate 400. (For now.)
- Maakuth 14y agoEmphasis on "for now". It wasn't that long ago when saturating 100Mbps link seemed distant. And I'm fairly sure home fiber installations, at least as WAN link, are going to grow pretty dramatically both because of the falling prices and because of the growing performance demands. DSL connections are growing increasingly insufficient and there's not that much room to grow in TV cable based home connections either, so fiber seems to be the way to go.
- timc3 14y agoAbout time really.
- luckydude 14y agoCool. I still remember arguing for 100Mbit ethernet at Sun and being told that it couldn't be done, use FDDI. Personally, I'd love ethernet to be used as the interconnect for more stuff. USB is kinda weird to me, I'd much rather have my disk drives be POE devices.
- voltagex_ 14y agoiSCSI + PoE. Sign me up please.
- luckydude 14y agoYeah, something like that. I was arguing for that when iSCSI was pretty new so I went with a remote DMA model that was somewhat simpler. I had a whole startup sketched out, it's pretty obvious when you think about it. Desktops get a software only version that will do reasonably well and is cheap. Power users/small servers get a slightly more expensive (maybe 2x the cost of a PCI card) that does the remote DMA in hardware; this card is one ethernet port and only handles one DMA at a time. Big servers get a multi port card that will run multiple streams at once. I tried to get the disk drive people interested because there already is a processor down on the drives that is a general purpose CPU (there are two, one that controls the disk arm, that's special, and one that manages the cache, read ahead/write behind, that could run a stripped down Linux or whatever and do the other side of the protocol). The drive people never got excited because the cost savings of el cheapo ethernet wasn't enough to offset the cost of the extra memory they felt they would need.
- mbell 14y agoThe transport definition is nice and all but I'd love to see what the plan is for routing/switching at these speeds. Given the speed at which 100Gbe has limped into the market I wouldn't expect to see anything capable of handling single links at these speeds for quite a long time. 1Tbps with with a 1500MTU is ~83 million packets a second. Just for illustrative comparison a CPU at 3.5Ghz would have 42 clock cycles per packet[0]. [0] I know a general purpose CPU would never be used for something like this, just putting the numbers into context.
- jsnell 14y agoYou might be selling general purpose CPUs short. To me the computing hardly seems like the daunting part, it's the IO (both the wire interface, and all the internal buses). To verify that intuition, I just did a quick experiment with an Intel 10Gbps NIC and a Xeon E5506. The workload was roughly similar to switching: read packet, parse the headers, extract some fields from the headers and use that as a key to a hash table lookup, write packet out to a different interface. This was done using code from a much more complicated system that I didn't spend any time tuning for just this case, so it's absurdly wasteful (e.g. spending 10% of the runtime just on useless calls to RDTSC). The result was 4.3 Mpps, or about 500 cycles / packet. That seems far from 83 Mpps / 42 cycles, but it was using a single core and a single rx queue on the NIC. Make it parallel with 16 cores / queues, and you're in the right ballpark. And then remember that we're talking of a 3.5 year old CPU, which was already low end when it launched.
- noselasd 14y agoYou're right that it's the IO (buses and memory) that the main limit. The problem is that a design around a central CPU doesn't scale, there's not enough IO, not enough pins, if you want to DMA packets from 24 interfaces onto main memory and have different cores operate on it is just infeasible with current designs.
- guscost 14y agoTsunamiii!!
- iyulaev 14y agoAs a hardware designer I'm worried about this more and more. PCB technology hasn't really advanced all that much in the past ~10 years, although the line rates are going higher and higher. Back in the ~100Mhz days a 1ns edge was about 6 inches long in HR370-based circuit boards, which was long enough to barely matter. Now, at 10Gbps, your bits are half an inch long, and your high-end harmonics are on the scale of your via lengths. PCB design has gotten appreciably harder in the past few years as a result - maybe three years ago, when I laid my first 10Gbps traces, I remember thinking that this was bleeding edge stuff, and some of the techniques we used were pretty exotic for the time. Now, 10Gbps is run-of-the-mill and 28.05 is on the horizon (maybe even coming into town!). It seems like we've really taken up all of the slack in PCB tech and I wonder what will happen next. Maybe academia's optical dreams from the last millennium (silicon ICs with on-die/co-die optical xcvrs) will finally be realized. Without a revolution in the way PCBs are processed and designed I doubt we'll be able to push much past 28.05Gbps in copper.
- ender7 14y agoCan anyone explain how these speeds, if possible, are even useful? For example, the bandwidth of L2 cache on a core i7 is about 70GB/s, which doesn't come close to Tbit's theoretical 125GB/s.
- SoftwareMaven 14y agoThese networks are the ones sitting inside massive datacenters connecting thousands of machines hosting dozens (hundreds by then) of cores. Of course, a single machine isn't going to saturate it, but 5000 running a massive map/reduce will.
- iyulaev 14y agoHigh-end routers and switches use dedicated h/w (ASICs or FPGAs) to move data, rather than shuffling all of it through a processor. Other, similar limitations exist, but through an FPGA you can likely push (roughly) an order of magnitude more data than through a processor due to a wider internal interconnect.
- Danieru 14y agoL2 caches are optimized for latency and thus make a poor metric for comparing bandwidth. As well these standards have considerable lead time and start off as math and physics. They need to be ready for when hardware is fast enough.
- Andys 14y agoOh, you only have one machine in a datacentre?
- noselasd 14y agoImagine you have a rack of servers. Around 40 of them fit in a rack, you equip each of them with 10Gb ethernet, they're running HDFS. You plug these 40 ethernet cables into one switch, so they can all talk to eachother, serving files to its clients, shuffling segments around etc. Now you want to connect that rack to another rack of 40 servers, on another floor of your building. Doing that with 1 10Gb cable, and you do not have full bandwidth between all your 80 servers. Even bonding a handful of 40Gb links will not be enough - and it'll be a lot of cables you have to manage. Doing it with 1 Tb link and you start having full bandwidth. Or just imagine connecting 2 buildings. Fewer cables. Higher bandwidth. The clue is you don't feed all this into 1 server running a commodity CPU and OS, you feed it into blinking boxes that will distribute the data to/from a high speed link onto many lower speed links to reach ordinary servers. Switches/routers can do that at line-rate if you implement this properly in hardware.
- ken 14y agoIn 2005, Jeff Atwood reported that 100M ethernet is 10x as fast as 10M ethernet, but 1G ethernet is only about 30% faster than 100M, even for a simple loopback test. http://www.codinghorror.com/blog/2005/07/gigabit-ethernet-and-back-of-the-envelope-calculations.html http://www.codinghorror.com/blog/2005/07/gigabit-ethernet-an... Is this still true? What's the bottleneck?
- theatrus2 14y agoNo, its not true. Regularly saturating a 1Gbps Ethernet port is quite possible on many systems, and happens often in datacenter installations. The bottleneck is really the computer buses (memory included) and implementation of protocols.
- zaphoyd 14y agoAssuming you arent CPU or memory limited, the bottleneck was originally largely due to gigabit Ethernet's support of unswitched hubs and as such uses CSMA to detect collisions. In order for this to work there is a minimum transmit timeslot to ensure that collisions can be detected at the full round trip delay of a ~100m network. Effectively a 1Gbit Ethernet node must transmit at least 512 bytes during its timeslot. If it has that much to send then it all goes out at 1gbit. If it only has a few bytes to send (a tcp ack for example) then it must idle for a bit to make sure there wasn't a collision. In theory gigabit Ethernet should perform at 1gbit for sustained transfers but much worse for workloads with more sporadic sets of smaller packets. In practice, especially on core switches and routers, modern techniques like frame bursting (sending multiple small packets going to the same destination back to back) even things out more. 10gbit Ethernet and above get rid of the carrier sense collision detection support all together and require the entire network to be point to point with switches. It has no minimum timeslots or packet lengths.