5 ms·

Bluetooth isn't too bad, Logitech Bolt is based on BLE and it's just fine. Bigger problem is integration into x86/x86_64 platform.

Findecanor 2y ago
Bluetooth mice use the HID protocol borrowed from USB, except with Bluetooth as carrier. But HID had not been designed for the possibility that packets could get lost: it sends movements as a relative vector since the previous packet. I don't know how Logi Bolt works, but Logitech has claimed that it should work better than BLE when the 2.4 GHz band is congested. Also that it would have better security than BLE.
- numpad0 2y ago
  I mean, you can't type in BitLocker password wirelessly without a dongle. Optical mice sensors aren't so repeatable anyway, so missing a packet or two probably aren't so critical.
- freehorse 2y ago
  > But HID had not been designed for the possibility that packets could get lost Doesn't the same problem exist for USB dongles with proprietary RF protocols? Logi Bolt is a good solution. But ime most other USB dongles are terrible. I have had a lot of bad connection issues with such USB dongles, and never with similar bluetooth devices. USB dongles also use the same 2.4GHz band, and even more they are prone to interference from nearby active USB ports [0]. If you have ever had a "jumping" mouse while transfering big amounts of data through a port neighbouring your mouse's USB dongle, this is likely the reason. [0] https://www.usb.org/sites/default/files/327216.pdf https://www.usb.org/sites/default/files/327216.pdf
  - hmry 2y ago
    The proprietary protocol can use absolute positions between device/dongle, and then the dongle can translate to relative positions at the edge, by returning the difference since the last poll
    - freehorse 2y ago
      Is position estimation from the signal that accurate for that?
      - tehbeard 2y ago
        They don't mean the absolute real distance between dongle and mouse. They mean the mouse communicates an absolute position (relative to some arbitrary 0,0 the mouse decides upon) instead of a relative direction. Dongle can then take latest coord packet and diff it against previous coord packet to get a relative coord to pass via HID to the system. If the RF packets are lost, some latency occurs but the dongle still has the previous mouse coord and can make a fairly accurate correction once a packet gets thru (get's from A to D, but might skip points B+C).
        pwg 2y ago
        What happens with that "absolute position relative to some arbitrary 0,0 picked by the mouse" when the user picks the mouse up off the table/pad/etc. and repositions it (i.e., they hit the edge of the pad and now "re-center" to continue moving left (or right) on screen). The mouse loses its 0,0 point reference as soon as it is picked up. It could send a "reset 0,0" packet of some form in this case, but now reception of that packet becomes critical to continuing to properly communicate motion to the attached computer.
        justsomehnguy 2y ago
        > It could send a "reset 0,0" packet of some form in this case, but now reception of that packet becomes critical to continuing to properly communicate motion to the attached computer. And those "how I would have designed a wireless mouse protocol" guys are back at the square one.
        hmry 2y ago
        That's not how mouse input works though, right? If I move my mouse cursor to 10,10, and then pick up the mouse and set it down somewhere else, it's still at coordinates 10,10. You don't need the mouse's physical absolute position, but just the cursor position (which is the sum of all the relative movements)
  - frollogaston 2y ago
    In all the years I've used wireless dongled mice, I've never had an issue. And all my stuff is bottom of the barrel unbranded from eBay or Amazon. Bluetooth mice and keyboards always have trouble pairing, or there's input lag, or sometimes I can't use them to wake the computer. And if you ever want to hold a startup key...
    - frollogaston 2y ago
      Clarification, the dongled mice are cheapo, the Bluetooth mice are expensive and still bad.
    - numpad0 2y ago
      Nintendo Wii Remote used almost completely bare standard HID over Bluetooth Classic and it just worked flawlessly. It needed Wiimote aware apps and special procedures for use with non-Wii devices but it had none such problems(I've had those too) in gaming. It could wake up consoles too. The problem is in 5W1Hs between combinations of (Windows, PC, Bluetooth), not the protocol. How should pairing keys be retained, etc.
      - frollogaston 2y ago
        Yeah the cross-platform situation makes things hard, but in a way it's the protocol's fault if it's hard to agree on things. Also, I really remember Wiimotes failing to pair a lot of the time, but it was so long ago that I could be wrong. All I know for sure is last time I was at someone's house and they wanted to play Switch, it took like 10 minutes to get the controllers set up, but most of that was bad UI.
- akvadrako 2y ago
  Bolt can't be better than BLE because it is BLE. Same with Apple gear which pairs so seemlessly. It's just that they control both sides of the signal so can better optimize the connection.
- mystified5016 2y ago
  I mean, they aren't putting raw HID packets on the air, they're encapsulated within another protocol that does handle reliable retransmission.

Findecanor 2y ago

Bluetooth mice use the HID protocol borrowed from USB, except with Bluetooth as carrier. But HID had not been designed for the possibility that packets could get lost: it sends movements as a relative vector since the previous packet. I don't know how Logi Bolt works, but Logitech has claimed that it should work better than BLE when the 2.4 GHz band is congested. Also that it would have better security than BLE.

numpad0 2y ago
I mean, you can't type in BitLocker password wirelessly without a dongle. Optical mice sensors aren't so repeatable anyway, so missing a packet or two probably aren't so critical.
freehorse 2y ago
> But HID had not been designed for the possibility that packets could get lost Doesn't the same problem exist for USB dongles with proprietary RF protocols? Logi Bolt is a good solution. But ime most other USB dongles are terrible. I have had a lot of bad connection issues with such USB dongles, and never with similar bluetooth devices. USB dongles also use the same 2.4GHz band, and even more they are prone to interference from nearby active USB ports [0]. If you have ever had a "jumping" mouse while transfering big amounts of data through a port neighbouring your mouse's USB dongle, this is likely the reason. [0] https://www.usb.org/sites/default/files/327216.pdf https://www.usb.org/sites/default/files/327216.pdf
- hmry 2y ago
  The proprietary protocol can use absolute positions between device/dongle, and then the dongle can translate to relative positions at the edge, by returning the difference since the last poll
  - freehorse 2y ago
    Is position estimation from the signal that accurate for that?
    - tehbeard 2y ago
      They don't mean the absolute real distance between dongle and mouse. They mean the mouse communicates an absolute position (relative to some arbitrary 0,0 the mouse decides upon) instead of a relative direction. Dongle can then take latest coord packet and diff it against previous coord packet to get a relative coord to pass via HID to the system. If the RF packets are lost, some latency occurs but the dongle still has the previous mouse coord and can make a fairly accurate correction once a packet gets thru (get's from A to D, but might skip points B+C).
      - pwg 2y ago
        What happens with that "absolute position relative to some arbitrary 0,0 picked by the mouse" when the user picks the mouse up off the table/pad/etc. and repositions it (i.e., they hit the edge of the pad and now "re-center" to continue moving left (or right) on screen). The mouse loses its 0,0 point reference as soon as it is picked up. It could send a "reset 0,0" packet of some form in this case, but now reception of that packet becomes critical to continuing to properly communicate motion to the attached computer.
        justsomehnguy 2y ago
        > It could send a "reset 0,0" packet of some form in this case, but now reception of that packet becomes critical to continuing to properly communicate motion to the attached computer. And those "how I would have designed a wireless mouse protocol" guys are back at the square one.
        hmry 2y ago
        That's not how mouse input works though, right? If I move my mouse cursor to 10,10, and then pick up the mouse and set it down somewhere else, it's still at coordinates 10,10. You don't need the mouse's physical absolute position, but just the cursor position (which is the sum of all the relative movements)
- frollogaston 2y ago
  In all the years I've used wireless dongled mice, I've never had an issue. And all my stuff is bottom of the barrel unbranded from eBay or Amazon. Bluetooth mice and keyboards always have trouble pairing, or there's input lag, or sometimes I can't use them to wake the computer. And if you ever want to hold a startup key...
  - frollogaston 2y ago
    Clarification, the dongled mice are cheapo, the Bluetooth mice are expensive and still bad.
  - numpad0 2y ago
    Nintendo Wii Remote used almost completely bare standard HID over Bluetooth Classic and it just worked flawlessly. It needed Wiimote aware apps and special procedures for use with non-Wii devices but it had none such problems(I've had those too) in gaming. It could wake up consoles too. The problem is in 5W1Hs between combinations of (Windows, PC, Bluetooth), not the protocol. How should pairing keys be retained, etc.
    - frollogaston 2y ago
      Yeah the cross-platform situation makes things hard, but in a way it's the protocol's fault if it's hard to agree on things. Also, I really remember Wiimotes failing to pair a lot of the time, but it was so long ago that I could be wrong. All I know for sure is last time I was at someone's house and they wanted to play Switch, it took like 10 minutes to get the controllers set up, but most of that was bad UI.
akvadrako 2y ago
Bolt can't be better than BLE because it is BLE. Same with Apple gear which pairs so seemlessly. It's just that they control both sides of the signal so can better optimize the connection.
mystified5016 2y ago
I mean, they aren't putting raw HID packets on the air, they're encapsulated within another protocol that does handle reliable retransmission.