4 ms·
The Solid-State Shift: Reinventing the Transformer for Modern Grids
- Calwestjobs 2y agofigure no. 1 is missing green color on HVAC transmission line. i do not have ExTwitter and i do not know other way to let them know. it is interesting to think about human made object in terms of how much materials they use, for example big old transformer contains 2 tons of iron, new solid-state transformer with same capacity uses only 300 kg of silicon (Si), 120kg kg of plastics and 50 kg of copper.
- JumpCrisscross 2y agoE-mail the author spatel@powermag.com [1]. [1] https://www.powermag.com/contact-us/ https://www.powermag.com/contact-us/
- mppm 2y agoWhy do solid-state transformers need so much silicon?
- LargoLasskhyfv 2y agoBecause they contain long cascades of these https://en.wikipedia.org/wiki/Insulated-gate_bipolar_transistor https://en.wikipedia.org/wiki/Insulated-gate_bipolar_transis... to be arranged into these https://en.wikipedia.org/wiki/Power_electronics https://en.wikipedia.org/wiki/Power_electronics
- mppm 2y agoAs a sibling comment implies, high-power IGBTs are still built from small and thin silicon dies with most of the module being heat spreader, insulator, interconnect and packaging. Even MW-class modules probably contain a gram or so of Si.
- wbraun 2y agoWhere are your weight figures coming from, they are not in the linked article. Packaged semiconductors are going to be more metal interconnect / plastic encapsulation / ceramic insulation than silicon by weight. These systems will also have a significant weight fraction in magnetic materials, either ferrite ceramics or amorphous metals. Still a huge weight savings, but the weight fractions you are giving see off and are missing some important materials.
- hristov 2y agoThis is very interesting and cannot happen fast enough, considering the current worldwide transformer shortage. I have a question for people more familiar with these. What exactly happens at the isolation stage. They say it includes a high frequency transformer (HFT). But its input and out put is DC. And classic transformers operate on AC. So in order to get the transformer working, one would have to chop up the incoming dc power into a square wave or a sine wave. But what transistors can you use to do this, considering you are dealing both with very high power and very high frequencies?
- cyberax 2y agoYou need to use nuclear-powered transistors! No, I'm not joking. For these kinds of voltages, you need to use highly homogenous doped silicon, and the only way to produce it is to irradiate silicon with neutrons. It transmutes some of the silicon atoms into phosphorus: https://nrl.mit.edu/facilities/ntds/ https://nrl.mit.edu/facilities/ntds/
- yjftsjthsd-h 2y agoI assume that if people are going to the trouble to literally irradiate the material in order to get what they need, they can't get the results by just mixing in phosphorus. Could somebody who actually understands this tell me why that is?
- cyberax 2y agoBecause there is no other way to produce homogenous enough thick wafers of doped silicon. Other methods rely on diffusion from the surface, which is not enough for this case. And doping during crystal growth doesn't produce homogenous enough silicon.
- CorrectHorseBat 2y agohttps://www.waferworld.com/post/the-complete-guide-to-doping-in-semiconductors-what-is-it-and-why-is-it-necessary https://www.waferworld.com/post/the-complete-guide-to-doping... It's apparently possible for boron doping. I think because phosphorus is bigger than silicium you'll get too many defects in the crystal, while with the smaller boron it is not an issue.
- Animats 2y agoThen they'll make them "cloud-enabled" and they will be hacked. It's scary to see protective relays for power systems with embedded web servers. "IEEE C37.118 synchrophasor measurement, DNP3 Outstation, Modbus TCP/RTU, Telnet, FTP, Simple Network Time Protocol (SNTP), built-in web server, and IEC 61850" [1] [1] https://selinc.com/products/351/# https://selinc.com/products/351/#
- fc417fc802 2y agoIt's fine provided that the link from the equipment that feeds it data is optically isolated to only go in one direction. A public internet connected web server that enables remote equipment control is indeed scary.
- Animats 2y ago> It's fine provided that the link from the equipment that feeds it data is optically isolated to only go in one direction. Then people get two of them, one for each direction.[1] Can someone explain why this is supposed to be secure? It's apparently a real product. [1] https://owlcyberdefense.com/product/recon-2u/ https://owlcyberdefense.com/product/recon-2u/
- fc417fc802 2y agoWut? That reads like satire. The equipment is inside the security boundary, the LAN is outside. What is the purpose of enforcing one-way control signals when the thing sending the control signals is by necessity within the same security boundary as the destination for those signals? I want to extend the benefit of the doubt and assume my own ignorance but I'm really struggling with this one.
- mppm 2y agoAmazing. Maybe I should pitch them my idea of MIL-spec acoustic relays for communicating with air-gapped facilities?
- sightbroke 2y ago
- algo_trader 2y agoEx-tesla Drew Baglino is starting a new company Heron for solid state transformers Of topic - dealing with medium voltage e.g. 6kv-10kv - are there existing be-spoke solid-state solutions? e.g. PV/battery 400V converted to 6kv without inverter/transformer