7 ms·
Scientists break down plastic using a simple, inexpensive catalyst and air
- kikokikokiko 2y agoWell, they used a "simple, inexpensive catalyst" and then HEATED the plastic/catalyst mysture. Nowhere in the article it gives you an estimate of the final cost of the process.
- IAmBroom 2y agoYes. I can break down plastics that way, using ordinary tap water. Actually, the tap water is optional. And instead of monomers, the end product is carbon - which is even more recyclable!
- kibibu 2y agoThe journal article is open access. https://pubs.rsc.org/en/content/articlelanding/2025/gc/d4gc05916f https://pubs.rsc.org/en/content/articlelanding/2025/gc/d4gc0... > Catalytic amounts of AC/MoO2 selectively convert waste PET into its monomer, terephthalic acid (TPA), within 4 h at 265 °C with yields as high as 94% under 1 atm air. I'm not a chemist so don't know if you can find a way to calculate the cost, but the authors claim that it's cheaper than current methods. The bigger deal imo is that it recovers PET monomers from mixed plastics, which means avoiding manufacturing more plastic.
- projektfu 2y agoYeah, these are pizza oven temperatures. The temperature appears to be just above the melting point for PET. It is also in the liquid phase for PBT, PEN and PEF. I think most recycling methods for PET require melting anyway.
- stubish 2y agoAlso manufacturing, so importantly this might be more energy efficient and maybe even cheaper than making new plastic. Depending on how the monomer->PET part gets solved.
- PaulHoule 2y agoThis is contrast to the pyrolysis-based "chemical recycling of plastics" which makes a mix of petrochemicals similar to what you find in the BTX stage of a petrochemical factories [1], especially for condensation polymers like PET. That is, this process produces fairly pure Terephthalic acid [2] and Acetaldehyde [3] and the first of those could be recycled into more PET. The thing is BTX chemicals and other precursors of mass produced plastics cost about 50 cents a pound which makes it hard for any kind of recycling process to be competitive. [1] https://en.wikipedia.org/wiki/BTX_(chemistry) https://en.wikipedia.org/wiki/BTX_(chemistry) [2] https://en.wikipedia.org/wiki/Terephthalic_acid https://en.wikipedia.org/wiki/Terephthalic_acid [3] https://en.wikipedia.org/wiki/Acetaldehyde https://en.wikipedia.org/wiki/Acetaldehyde
- culi 2y ago> about 50 cents a pound which makes it hard for any kind of recycling process to be competitive. We've had almost a century of subsidization of the oil industry. The gov't needs to play a bigger similar role if the recycling industry is ever gonna be able to compete We need a tax on the full lifecycle cost of plastics so we can stop treating waste as an economic externality
- PaulHoule 2y agoLandfilling plastics on the other costs about 4 cents a pound. The nightmare scenario about plastics is not that they get landfilled but that people chuck them on the ground and they find their way to the ocean and get ground up into microplastics.
- Gigachad 2y agoOr that they just shed microplastics during their lifetime. Car tires and clothing being a huge source. It would be cheaper to just ban stuff like polyester fleece than to try to clean it up after.
- timschmidt 2y ago
- jandrese 2y agoThat's within the range of a kitchen oven. The biggest problem is that plastic is so cheap that even that relatively modest energy use may make it uneconomic compared to virgin TPA, especially if you have to clean the inputs thoroughly first.
- hinkley 2y ago4 hours sounds like a lot of factory space to generate a substantial flow of output.
- ta988 2y agoThose processes can be made continuous most of the time.
- hinkley 2y agoYou've still got Little's Law though. You either need a very giant machine or a very low feed rate in order to have stuff come out one end 4 hours after going in the other. I think steel recycling may be faster than that.
- alhw 2y agoThe authors' claim is that it is cheaper than other catalytic methods that have been explored/invented to depolymerize PET into TPA monomers. These qualitative cost estimates are based on the reaction conditions (temperature, solvent, other reactants (in this case, humid air)) and the unit operations involved in the downstream separation processes that isolate the TPA product from unreacted PET. The largest hurdle that precludes widespread deployment of technologies for PET recycling, as well as those for most other plastics, occurs (way) upstream of the reaction and separation train. The highest cost is related to collecting and sorting used PET bottles and TPA-derived textiles. Mechanical recycling or any flavor of chemical recycling (pyrolysis, hydrolysis, etc.) all suffer from the same hurdle. If the target product of the recycling process is a TPA-derived plastic (be it for clothing or soda bottles), then mechanical recycling is usually cheaper, since it produces a product that only needs to be reshaped and remolded to give shirts or jugs. Chemical recycling converts PET into its constitutive monomers, and to (re)produce a TPA-derived plastic from the monomers requires a not inexpensive (re)polymerization step, in addition to reshaping and remolding. Chemists, even highly regarded ones like Tobin Marks, are less interested in "solving" the PET recycling issue and more interested in the fundamental chemistry involved in chemical recycling. Issues of Green Chemistry (or blurbs in phys.org) are not the appropriate reading materials to get insight into costs, scale-up, etc.. Very few, if any, academic journals are focused on such matters, and rightly so, in my opinion.
- m463 2y agoI wonder if processes like this can recycle the heat? Kind of like fresh air exchange into a heated house where new air in gets heated exchanging with old air out
- XorNot 2y agoShort answer: yes. All industrial processes recycle heat extensively. Heck even distillation based desalination isn't that inefficient because you do in fact recover the heat.
- baranul 2y agoKeep seeing these "possible breakthroughs" in breaking down plastic waste, but no concrete time frames on expanding to scale nor real world costs. Meanwhile, the mountains of plastic continues. Finding it also odd that biodegradable plastics and safer alternatives are going quiet. As if the new scheme is to keep fossil fuel companies rolling, with the promise that one day a solution to get rid of incalculable mountains of plastic will be found. Don't worry, feel free to plastic pollute, because one day there will be a solution.
- foxglacier 2y agoIncalculable mountains aren't a real environmental problem. People just believe that for some reason. We can just leave them there forever. The actual environmental value in recycling is reducing the CO2 emissions from making new plastic by reducing production of new plastic. I don't know if biodegradable plastic actually helps at all or just placates the people worried about the fake problem of incalculable mountains.
- baranul 2y agoI'm not sure why you have the take that plastic pollution is not a problem. If anything, it is a massive catastrophe that threatens the environment and possibly the human race. Plastic pollution is destroying the environment[1], wildlife[2], and damaging humans[3][4]. That includes newborn babies[5]. [1] https://www.unep.org/plastic-pollution https://www.unep.org/plastic-pollution [2] https://www.biologicaldiversity.org/campaigns/ocean_plastics/ https://www.biologicaldiversity.org/campaigns/ocean_plastics... [3] https://www.nationalgeographic.com/science/article/microplastic-human-brain-health https://www.nationalgeographic.com/science/article/microplas... [4] https://www.nationalgeographic.com/premium/article/microplastics-plaque-heart-disease https://www.nationalgeographic.com/premium/article/microplas... [5] https://scitechdaily.com/startling-discovery-scientists-find-microplastics-in-infant-organs-at-birth/ https://scitechdaily.com/startling-discovery-scientists-find...
- foxglacier 2y agoI'm talking about plastic waste in landfills ("mountains"). For that, recycling does no good because it's just as likely (or more?) to leak into the environment failing to reach a recycling facility as it is failing to reach a landfill.
- deleted 2y ago[deleted]
- kylehotchkiss 2y agoI was expecting a much more complicated catalyst!
- wolfi1 2y agothere is also the possibility to recycle pet-bottles into food grade bottles again using just mechanical means, I know at least two European companies who provide such machines
- PaulHoule 2y agoI've seen 100% recycled PET bottles for Coca-Cola products in the US https://www.cnn.com/2024/03/19/food/coca-cola-new-bottles/index.html https://www.cnn.com/2024/03/19/food/coca-cola-new-bottles/in... and Pepsi is selling 100% post-consumer bottles in some EU countries https://www.pepsico.com/our-stories/press-release/pepsico-commits-to-100-recycled-plastic-beverage-bottles-for-its-pepsi-brand-in-9-eu-markets-by-2022 https://www.pepsico.com/our-stories/press-release/pepsico-co... Those clear beverage containers are an ideal case for mechanical recycling. This company https://repreve.com/ https://repreve.com/ makes polyester fiber from recycled PET. I have a few garmets made from it and my impression is that the fabric feel is nicer than average.
- culi 2y agoYes PET (#1) and HDPE (#2) are the two easiest plastics to recycle and the most commonly recycled
- culopatin 2y agoBut fabrics are the best way of putting super hard to track microplastics in water and in the air. We drink them and inhale them
- bavell 2y agoI've heard recycled plastic's polymer structure can be compromised, leading to orders of magnitude more micro plastics being released into e.g. your plastic water bottle.
- Xiol32 2y agoBreak down into what? Is this also going to end up in my testicles?
- tigerBL00D 2y agoIt says "Leveraging the trace amounts of moisture in air, the broken-down PET is converted into monomers—the crucial building blocks for plastics. From there, the researchers envision the monomers could be recycled into new PET products or other, more valuable materials." I don't know if there's some enormous challenge hiding behind the word "envision", but I'm assuming it's a closed system until something useful comes out of the other end. The method just can't be a lot more expensive than to make the same thing/material from scratch or it's never going to gain traction.
- Imustaskforhelp 2y agoWell let's truly hope that its not that much expensive
- __MatrixMan__ 2y agoterephthalic acid and acetaldehyde (the paper: https://pubs.rsc.org/en/content/articlehtml/2025/gc/d4gc05916f https://pubs.rsc.org/en/content/articlehtml/2025/gc/d4gc0591...)
- hnbad 2y agoIf you're worrying about microplastics in your testicles, you're still underestimating how much plastic is in your body. Literally infants will already have microplastic in their blood at birth.
- culi 2y agoWhat percentage is actually broken down into monomers? How much microplastic waste is left behind. Given the reliance on "ambient air" I imagine it's not 100%. Regardless, I'm excited to hear about progress on solving the plastic waste crisis. It seems better than the current alternatives the article presents: > "The U.S. is the number one plastic polluter per capita, and we only recycle 5% of those plastics," said Northwestern's Yosi Kratish, the study's co-corresponding author. "There is a dire need for better technologies that can process different types of plastic waste. Most of the technologies that we have today melt down plastic bottles and downcycle them into lower-quality products.
- ac29 2y ago> What percentage is actually broken down into monomers? "In just four hours, 94% of the possible TPA was recovered."
- culi 2y agoThis is great but PET (symbol #1) is one of the few plastics that ARE recyclable. I wonder if any of these techniques can be used to solve the non-recyclable plastic problems
- iwontberude 2y agoNot infinitely so, maybe this is used on old PET
- math 2y agoAduro’s tech works with hard to recycle, dirty, mixed plastic. Search for Eric Appelman interview on YouTube for more info. Some of the retail investor coverage is cringeworthy, but my take is the tech is likely as good as described (disclosure: I’m an investor).
- aitchnyu 2y agoApparently 95% of the test sample can be recovered. If its dirty and mixed, how much can TPA can be recovered and is the sludge chemically inert and landfillable?
- math 2y agoResults will vary a lot with all the parameters (of which there are many). They don’t disclose all the detail but I know they have done thousands of tests across the parameters space. I know they believe they can process sludge produced from other processes.. The industry generally is very opaque, I think for competitive reasons and also because it’s so complex/nuanced.
- culi 2y agoMixed plastic is definitely impressive, but how is it separated? I imagine a lot of it must be done by hand? And then washed with water? Seems both labor intensive and energy intensive
- math 2y ago
- lxmorj 2y agoWouldn't (fully) burning all single-use plastics effectively make them no more long-lived and problematic than burning crude oil at sea? I know that's a low bar, but it seems like at least you're getting two uses out of them at that point...
- Synaesthesia 2y agoA lot of plastics are incinerated. I think it has to be at a high temperature. Of course this does emit carbon dioxide.
- zdragnar 2y agoThe temperature at which burning polymers completely eliminates particulates and CO is very close to the temperature that NOx starts to form. Source: I did a bunch of research on rocket mass heaters (think rocket stove, not missile engine) when I built one.
- Mashimo 2y agoAnd if you produce heat / energy from burning it, you can technically call it recycling :) Put some filters on top of the power plant exhausts and it's clean enough to build a ski slope on top of it.
- neilknowsbest 2y agoThe reference: https://en.m.wikipedia.org/wiki/Amager_Bakke https://en.m.wikipedia.org/wiki/Amager_Bakke
- XorNot 2y agoLandfilling plastics avoids even putting CO2 back into the environment. Modern landfill is highly engineered and extremely stable: what goes in there stays there. Plastic starts as oil in the ground. Replacing it as solids in the ground isn't a problem.
- ainiriand 2y ago
- whynotnowplz 2y agoWhy don't we throw all our trash into a volcano?
- gsf_emergency_2 2y agoBecause historically, volcanos are thought to prefer high value offerings like live human beings
- dinkblam 2y agoor golden rings of power
- 082349872349872 2y agolooking at https://en.wikipedia.org/wiki/Volcanic_eruption#:~:text=There%20are%20three,reaches%20the%20surface https://en.wikipedia.org/wiki/Volcanic_eruption#:~:text=Ther... suggests that if a goal is to avoid eruptions, low-water content golden rings would be preferable to the bags of mostly water that are live human beings.
- gsf_emergency_2 2y agoReminder: fast approaching era of {(precious metal) androids,(factory floor) lava} being a valid drop-in for {e-waste,recycling} Pulo ng suso ng dalaga https://youtu.be/uh4dTLJ9q9o https://youtu.be/uh4dTLJ9q9o https://en.wikipedia.org/wiki/Perhentian_Islands#:~:text=of%20Susu%20Dara%20(-,Virgin%20Milk,-)%2C%20Serengeh%20and%20Rawa https://en.wikipedia.org/wiki/Perhentian_Islands#:~:text=of%...
- 082349872349872 2y agohttps://en.wikipedia.org/wiki/Mamucium#Etymology https://en.wikipedia.org/wiki/Mamucium#Etymology
- 2y ago
- Synaesthesia 2y agoThis is a realm where government regulations can really make a big difference. China banned single-use plastics. A lot of plastic use is really unnecessary.
- thrance 2y agoAnd Trump reverted the ban on plastic straws. One step forward, three steps backwards...
- whywhywhywhy 2y agoAlways seemed like greenwashing to care about the straw in the drink that’s on a plastic cup with a plastic lid from the beans shipped in a plastic bag and render the experience of trying to drink it as tedious as possible.
- thrance 2y agoThe solution is not to unban them, it's to ban those plastic things too. And c'mon, paper straws are fine, people whining about it really just do it to vice signal against ecology.
- Steve44 2y agoI believe the issue with straws is they were hard to recycle because they were lightweight and often mingled with other materials, such as cups, napkins, and food waste. They were generally made from PP which is widely recycled as a material. They are also commonly littered and as they don't break down in the environment led the not only being unsightly but also clogging up waterways and direct damage to wildlife. Paper straws can still be littered, but break down so don't cause the same physical problems in the longer term.
- yimby2001 2y ago[dead]
- stosssik 2y agoA promising approach—especially if it proves as simple and low-cost at scale. It’s obviously not going to "disrupt" the plastics industry overnight, but it could offer a valuable local alternative, particularly in regions dealing with massive plastic waste imports. The real question is whether this kind of tech can evolve outside of patent lock-in and centralized exploitation models.
- voidUpdate 2y agoThis is cool! Can't wait to never hear about it again
- piokoch 2y agoThere is no such a thing like "plastic". The article is about PET - polyethylene terephthalate, there are hundreds other "plastics", which different chemical propensities. The problem is not actual act of recycling, but figuring out what a given piece is made of. PET is popular - 70% of all bottles are made of it, but there are those 30%, so the most expensive part - sorting - has to be carried anyway. Plus we target only bottles. Recycling is a great example of the rule "Privatizing Profits and Socializing Losses". Business is packing their stuff in whatever they want and then citizens, authorities has to deal with the wastes business produced. Why we can't force to use for bottles/packaging a single type of plastic? Why we can't force easily removable labels on the bottles (the glue that is used to stick half plastic/half paper labels is a deal breaker for simple recycling), I think only in Japan this is mandatory. Why we allow making packages (especially for take-away food from pseudo-paper (which is a paper with plastic coating), which is not recyclable at all and, in fact, is much worst than plastic, but business claims that "now we are eco, see, we use paper for packaging)? Why we allow to use for packaging whatever business wants? Why the cost and effort of the recycling has to be on people and local governments?
- bschwindHN 2y agoVery good questions, but the answer is disappointing: because money
- mc32 2y agoOnly in some ways. Mostly it’s due to use case and desired characteristics of the container, one of which can be cost. As another poster noted, different products need different packaging solutions.
- nervousvarun 2y agoThat's an important point you're making here...Can you expand on that with an example? A specific use of plastic as a container that gives the desired characteristics...specifically where those characteristics could not be met by another (if expense isn't a consideration) material? If there are less toxic materials that could "do the job" but are more expensive then it really is about money no?
- vagab0nd 2y agoI always thought the real problem with plastic is that the problem itself is a feature. If it were easy to breakdown it would be used much less. A "solution" might actually cause nasty problems we haven't encountered before. Or Gray Goo.