5 ms·

My boss tells me we need it in Comic Sans for the next meeting with our board of directors. Thank you.

collingreen 2y ago
Hello!? No response yet is this project dead or something it has been 30 minutes since the last question. This is very important to a major customer project of ours please get on this.
- bastijn 2y ago
  It has come to our attention that an unlicensed tool has been used in the workplace. Please be advised that the use of unlicensed software is strictly prohibited, as it may pose significant legal, security, and compliance risks to the company. Effective immediately, any further use of this tool must cease. Failure to comply may result in disciplinary action, up to and including termination, in accordance with company policy. If you have any questions or require guidance on approved software tools, please contact IT or Compliance.
  - LASR 2y ago
    When will this tool have SOC compliance and SSO support? The devs on this must be sleeping. F for not paying attention to your users’ needs.
    - doubled112 2y ago
      Please be advised that SSO is on the roadmap and will only be available in the Premium Plus Enterprise for Corporations edition.
      - noisy_boy 2y ago
        Please signup now for our hourly newsletter to be in the loop for the incredibly exciting developments. Rest assured that your privacy is of the utmost importance to us.
        malfist 2y ago
        Thank you for visiting our website. Shopify has provided us with your email address since you looked at a product page and we have decided you have consented to receive emails from us. If you wish to opt out of messaging, please note that every visit to our website, opt out page included, will grant consent for messaging again.
- malfist 2y ago
  Let's get everybody working on the feature into an hour long status meeting to check for blockers. This is really important so we'll need to do this at least twice a day
  - FridgeSeal 2y ago
    No stop it, you’re stressing me out just reading it.
    - malfist 2y ago
      Don't worry, your manager will roll up their sleeves and help you code
      - noisy_boy 2y ago
        And if shit hits the fan, he will take full responsibility before making the incredibly hard decision of letting you go after thanking you for all your hard work as part of the close-knit corporate family.
xd1936 2y ago
Now there's a design that pops!
_carbyau_ 2y ago
Real World aside: The other day I tried to 3D print small text. (Not super small, just the usual 0.4 nozzle size.) Comic Sans worked out best for this due to pretty constant line width.
- Symbiote 2y ago
  Comfortaa works well for this: https://fonts.google.com/specimen/Comfortaa https://fonts.google.com/specimen/Comfortaa
  - Imustaskforhelp 2y ago
    I was once given a 3d print of my name by one of my father's friends who had a 3d printer at home. I think this was what font they used except they had it all connected , that is if I am typing "test" then t is connected to e and then s and then t , in probably the same font as that of Comfortaa.
- soneil 2y ago
  Fonts with 'routed' in their names are often a good place to look for this - they're named thus because they were designed to be scribed/engraved with a router, so very frequently have a constant width. (and if you're up for a rabbit hole, https://aresluna.org/the-hardest-working-font-in-manhattan/ https://aresluna.org/the-hardest-working-font-in-manhattan/ )
  - _carbyau_ 2y ago
    That was a delightful rabbit hole. Also, thank you for the "routed" tip. Your rabbit hole also mentions "monoline" and the MIL-SPEC-33558 font too. I'd upvote you ten times if I could. Made my day.
Izkata 2y ago
I would like to share the existence of Comic Papyrus: https://befonts.com/comic-papyrus-font-finally.html https://befonts.com/comic-papyrus-font-finally.html
- Imustaskforhelp 2y ago
  It actually looks really good , but I don't see a option to try text like in google fonts for example. Let me see if its on google fonts Edit:nvm the option to write text is below , I didn't see it. Its kinda cool actually.

Hello!? No response yet is this project dead or something it has been 30 minutes since the last question. This is very important to a major customer project of ours please get on this.

bastijn 2y ago
It has come to our attention that an unlicensed tool has been used in the workplace. Please be advised that the use of unlicensed software is strictly prohibited, as it may pose significant legal, security, and compliance risks to the company. Effective immediately, any further use of this tool must cease. Failure to comply may result in disciplinary action, up to and including termination, in accordance with company policy. If you have any questions or require guidance on approved software tools, please contact IT or Compliance.
- LASR 2y ago
  When will this tool have SOC compliance and SSO support? The devs on this must be sleeping. F for not paying attention to your users’ needs.
  - doubled112 2y ago
    Please be advised that SSO is on the roadmap and will only be available in the Premium Plus Enterprise for Corporations edition.
    - noisy_boy 2y ago
      Please signup now for our hourly newsletter to be in the loop for the incredibly exciting developments. Rest assured that your privacy is of the utmost importance to us.
      - malfist 2y ago
        Thank you for visiting our website. Shopify has provided us with your email address since you looked at a product page and we have decided you have consented to receive emails from us. If you wish to opt out of messaging, please note that every visit to our website, opt out page included, will grant consent for messaging again.
malfist 2y ago
Let's get everybody working on the feature into an hour long status meeting to check for blockers. This is really important so we'll need to do this at least twice a day
- FridgeSeal 2y ago
  No stop it, you’re stressing me out just reading it.
  - malfist 2y ago
    Don't worry, your manager will roll up their sleeves and help you code
    - noisy_boy 2y ago
      And if shit hits the fan, he will take full responsibility before making the incredibly hard decision of letting you go after thanking you for all your hard work as part of the close-knit corporate family.

xd1936 2y ago

Now there's a design that pops!

_carbyau_ 2y ago

Real World aside: The other day I tried to 3D print small text. (Not super small, just the usual 0.4 nozzle size.) Comic Sans worked out best for this due to pretty constant line width.

Symbiote 2y ago
Comfortaa works well for this: https://fonts.google.com/specimen/Comfortaa https://fonts.google.com/specimen/Comfortaa
- Imustaskforhelp 2y ago
  I was once given a 3d print of my name by one of my father's friends who had a 3d printer at home. I think this was what font they used except they had it all connected , that is if I am typing "test" then t is connected to e and then s and then t , in probably the same font as that of Comfortaa.
soneil 2y ago
Fonts with 'routed' in their names are often a good place to look for this - they're named thus because they were designed to be scribed/engraved with a router, so very frequently have a constant width. (and if you're up for a rabbit hole, https://aresluna.org/the-hardest-working-font-in-manhattan/ https://aresluna.org/the-hardest-working-font-in-manhattan/ )
- _carbyau_ 2y ago
  That was a delightful rabbit hole. Also, thank you for the "routed" tip. Your rabbit hole also mentions "monoline" and the MIL-SPEC-33558 font too. I'd upvote you ten times if I could. Made my day.

Izkata 2y ago

I would like to share the existence of Comic Papyrus: https://befonts.com/comic-papyrus-font-finally.html https://befonts.com/comic-papyrus-font-finally.html

Imustaskforhelp 2y ago
It actually looks really good , but I don't see a option to try text like in google fonts for example. Let me see if its on google fonts Edit:nvm the option to write text is below , I didn't see it. Its kinda cool actually.