4 ms·
Says semiconductors have a 50% extra tarriff. That includes LEDs, presumably. I'm trying to do some things with LEDs, and ouch.
by fragmede 2y ago
Says semiconductors have a 50% extra tarriff. That includes LEDs, presumably.
I'm trying to do some things with LEDs, and ouch.
- JKCalhoun 2y agoI guess there's always Goodwill, landfill. You can pull PCBs, desolder components.
- jayyhu 2y agoAFAIK the Section 301 tariff (and increases) only applies to parts imported from China/HK. There are lots of manufacturers on DigiKey that make their parts from elsewhere where these tariffs are not assessed. As a data point, I recently bought a bunch of Lite-on LEDs on DK, their COO was Thailand, and I wasn't tariffed for those parts.
- fecal_henge 2y agoSimilarly my hobby involving ship to shore cranes is going to be painful. Seriously though they have a lot of stock in their warehouse. If this is already imported and paid for then it should be exempt right? The page doesnt state what happens to foreign customers. Does the duty only apply for domestic buyers?
- alibarber 2y agoI’d also like some insight on the foreign buyer bit as DigiKey is by far the best and most reliable supplier to my part of the world despite being the other side of an ocean. I pay local VAT and any local tariffs, all collected by DigiKey, and don’t think I pay any US taxes on the shipment. By intuition I’d think whatever US tariff wouldn’t apply, but these things don’t exactly make sense a lot of the time. Edit: Upon reading about the tariff drawback process, and these latest ones not being applicable to it - it does seem that I’ll be paying US tariffs for something [from China] that is then exported to me in another country.
- lysace 2y agoSame. Most credible alternative in Europe: Distrelec/RS Components (both part of RS Group).
- foft 2y agoOuch, if that is the case this is only going to boost the non US suppliers. Has anyone tried lcsc.com? Digikey and mouser are great but if all semiconductors go up 50% that is a problem.
- nativeit 2y agoI've used lcsc.com, and aside from their website being a little janky, it was fine. I would normally have used Digikey/Mouser, but I needed a few parts they didn't stock, but LCSC did. Then I found that a bunch of the other parts I was ordering were significantly cheaper from LCSC, and ultimately ordering everything I could from them cut the bottom line price of my BOM in half. That said, shipping was $40-50 for one small box with around 50 components (varying quantities), so if you do order from LCSC it's best to order as much as possible within the same order, since the shipping is gonna be a significant chunk of the cost for any order <$1K. It took a few weeks to arrive using DHL, where Digikey/Mouser both generally deliver within a week (domestic shipping, I'm in N. Carolina). TLDR; I would recommend LCSC if you are buying enough such that the per-part savings offsets the significantly higher shipping costs, and you don't mind waiting a ~10-14 days for your parts to arrive. I personally still use domestic suppliers for most parts, but when I have a larger BOM and I'm not under a deadline, I'll go with LCSC. If you're ordering from the US, you should also be aware that Trump's tariffs still apply, so be prepared to pay at least 10% more for everything (some items--things like medical equipment, batteries, and semiconductors--are significantly higher, up to 100%). There may also be a processing fee levied by the shipping carrier if they collect the tariffs on your behalf. As I understand it, LCSC includes a customs declaration form with the shipment, and it's your responsibility to pay any duties or tariffs as the importer.
- alibarber 2y agoYes it does seem a bit strange - I guess the goal here is to encourage them to source and sell me a quality American SMD diode at less than $(0.006 + 10%) per unit. That said I'm struggling to fully understand it all, the site kind of implies that the 50% Semiconductor tariff _is_ drawbackable - and if we look some of those were in effect since 2024. It does say that the 10% 'China tax' is not. My reading here then is that the 10% extra is for everyone, and the rest of that table in addition is for goods consumed in the US. (And, some of those tariffs don't look very different from some of them in my non-US locale, which I would have to pay anyway) Still a daft situation, will for sure be looking around for other suppliers.
- XorNot 2y agoYou don't pay for how much the item in the store costs, you pay how much it will cost to restock it (see also: petrol/gasoline prices changing throughout the week - it's because there's a fixed charge to refill the tanks, regardless of how much goes in).
- supahfly_remix 2y agoOut of curiosity, can you tell me more about your hobby that involves ship to shore cranes? Or, is this an indirect way of saying that your hobby involves transoceanic shipping? This is Hackernews, so it could plausibly be either.
- hobs 2y agoA third interpretation is this is a joke and they are talking about a business they want to make work without the tariffs, but yeah might have flown over my head too.
- braiamp 2y ago> Seriously though they have a lot of stock in their warehouse Companies do not price things as they are now, or how much it cost in the inventory, but about how much they must charge to keep the business afloat. That means that prices will go up only because there's a risk that prices would go up, so that in any event, they can cover whatever they need to keep operations on-going. While prices go up in both a high risk or no competitive markets, prices would only go down if there's a competitive market.
- whoisthemachine 2y agoThat's the minimum they charge. The maximum they charge is how much they think customers are willing or have to pay. If the general mood is that tariffs will cause inflation, then price gouging will likely occur.
- magicalhippo 2y ago> Seriously though they have a lot of stock in their warehouse. Given they didn't have to pay tariffs before, I would assume they've declared all the goods and in that case yes. > Does the duty only apply for domestic buyers? If you re-export goods that was previously imported without using it, like DigiKey, then at least here in EU you can apply to get the duties paid back. However it's quite annoying if you import large quantities and sell small fractions. It works better if you do it on a 1-1 basis. Not 100% sure how it works in US, but in EU you can have a bonded warehouse, where you store goods before you perform the import declaration to free them for general use. This allows you to postpone the import declaration, and hence tariffs to be paid, to when you've sold the goods, or even avoid paying tariffs if you export the goods directly from the bonded warehouse. The latter part is very attractive to companies like DigiKey which sell a lot of their goods abroad. There are typically strict rules regarding getting a bonded warehouse license, with requirements for bookkeeping and physical separation with access control to avoid mistaking the bonded goods for normal non-bonded and hence technically smuggle goods into the country. This also affects who's performing the import declaration. Pre-tariffs there's usually not much incentive to do anything more fancy than letting someone else handle the import declarations. However the added bookkeeping and usually means the one responsible for the bonded warehouse is best suited to perform the declarations. At least here in EU there are companies that offer this as a service. Anyway the point was, if they didn't already have a bonded warehouse and decide to go with one, it's not just sending an email and get some approval. It might affect how DigiKey has to handle this goods deeply.