3 ms·

With all due respect, I agree that the blocked spigot was surprising, but the block is not hard to see if you just peek inside the spigot before connecting it.

by xg15 2y ago

With all due respect, I agree that the blocked spigot was surprising, but the block is not hard to see if you just peek inside the spigot before connecting it. I struggle a bit to imagine how someone figures out they have to connect the hose there and even does all the connecting but never views the spigot from an angle where they can see the block.

aargh_aargh 2y ago
I have no trouble imagining that since the spigot is already connected and sits in a cabinet (visible on the photo), you can't peek inside and it won't occur to you to poke it. Unknown unknown. I also hate cleaning my spigot for that reason - there just isn't enough wiggle room in the cabinet to put it back leak-free after I unscrew it.
- xg15 2y ago
  Good point. If he wasn't around when the sink was installed or at that point never knew that the spigot was important, there's be no reason to have noticed the block.
addandsubtract 2y ago
The spigot is too thin to fit a finger inside it, except for maybe the pinky finger, which is too short to reach the blocking part. Shining a light inside is also deceiving, because the blocking part is so far back, it might as well be the wall of the main pipe. The only way to realize there's a wall there, is to stick a screwdriver inside.
bhandziuk 2y ago
Pretty much all the pinch points encountered were things visible and could have been through about at the start of the project. They've done this 9 times before, you need a wrench/pliers to put the hoses on. It needs to drain (also that drain cover likely needed a only a flathead screw driver to remove. Drilling it out leaved burrs and usually they are designed to be popped out with a little force.) They lived in 9 places and don't have a drill that can chuck in a small hole saw. Seems surprising. But I guess the point is you don't know what you don't know.

by xg15 2y ago

aargh_aargh 2y ago

I have no trouble imagining that since the spigot is already connected and sits in a cabinet (visible on the photo), you can't peek inside and it won't occur to you to poke it. Unknown unknown. I also hate cleaning my spigot for that reason - there just isn't enough wiggle room in the cabinet to put it back leak-free after I unscrew it.

xg15 2y ago
Good point. If he wasn't around when the sink was installed or at that point never knew that the spigot was important, there's be no reason to have noticed the block.

addandsubtract 2y ago

The spigot is too thin to fit a finger inside it, except for maybe the pinky finger, which is too short to reach the blocking part. Shining a light inside is also deceiving, because the blocking part is so far back, it might as well be the wall of the main pipe. The only way to realize there's a wall there, is to stick a screwdriver inside.

bhandziuk 2y ago

Pretty much all the pinch points encountered were things visible and could have been through about at the start of the project. They've done this 9 times before, you need a wrench/pliers to put the hoses on. It needs to drain (also that drain cover likely needed a only a flathead screw driver to remove. Drilling it out leaved burrs and usually they are designed to be popped out with a little force.) They lived in 9 places and don't have a drill that can chuck in a small hole saw. Seems surprising. But I guess the point is you don't know what you don't know.