3 ms·

The people on the youtubes doing the high-HP turbo stuff I watch try really, really hard to keep as much heat in the turbos (using thermal blankets, hi-tech coa

The people on the youtubes doing the high-HP turbo stuff I watch try really, really hard to keep as much heat in the turbos (using thermal blankets, hi-tech coatings and whatnot) in an effort to extract as much usable energy out of the exhaust gasses as possible. The cold side heats up due to the compressive 'forces' (or whatever it's called) AFAICT. Same reason superchargers need also need aftercoolers to run at peak efficiency. One of those pesky laws of thermodynamics seems to imply that if a turbo only used the kinetic energy of the exhaust it would not be able to overcome the losses of transferring the energy into the intake and would be a net drain on power. Of course, I'm no thermodynamic engineer and am more likely to be wrong than not. --edit-- Though, certainly, a turbo is harnessing some of the lost energy of the combustion process since the piston can't do a 100% energy conversion.

toast0 2y ago
> One of those pesky laws of thermodynamics seems to imply that if a turbo only used the kinetic energy of the exhaust it would not be able to overcome the losses of transferring the energy into the intake and would be a net drain on power. Turbos aren't really about transferring energy into the intake. It's about getting more air (oxygen) into the intake, so you can burn more fuel per engine stroke. The extra power comes from combusting more inputs.
lukevp 2y ago
The law of thermodynamics you’re referring to is in a closed system. In this case, energy is being introduced by the burning gasoline pushing the pistons, and as a byproduct of that, exhaust gases are vented at a certain speed and volume. That is wasted energy as it just goes out the tailpipe more forcefully which adds minimal forward momentum to the car. The reason turbos work is not because they are forcing more air, it’s because they are forcing more air which ALSO raises the compression ratio and the amount of fuel detonating (the MAF will sense the increased air density and add additional fuel to compensate). I.E. a turbo burns more fuel and therefore it produces more power. Hot air is less dense than cold air (why heat rises). Probably keeping the hot side of the turbo hot helps with gas expansion, perhaps that increases the force on the turbine? I’m not sure about that. But the intercooler is to cool the air on the compression side because cold air is denser. Which means more air into the cylinder, which means more fuel. Probably the colder air helps with auto detonation too which lets you push the compression ratio further if the pistons and cylinders can handle it.
WalterBright 2y ago
> The cold side heats up due to the compressive 'forces' (or whatever it's called) A gas heats up when it is compressed.
Lanolderen 2y ago
As a side note a lot of exhaust/turbo isolation in tuned cars also has to do with melting/overheating other things in the engine bay. Especially on street cars.

toast0 2y ago

> One of those pesky laws of thermodynamics seems to imply that if a turbo only used the kinetic energy of the exhaust it would not be able to overcome the losses of transferring the energy into the intake and would be a net drain on power. Turbos aren't really about transferring energy into the intake. It's about getting more air (oxygen) into the intake, so you can burn more fuel per engine stroke. The extra power comes from combusting more inputs.

lukevp 2y ago

The law of thermodynamics you’re referring to is in a closed system. In this case, energy is being introduced by the burning gasoline pushing the pistons, and as a byproduct of that, exhaust gases are vented at a certain speed and volume. That is wasted energy as it just goes out the tailpipe more forcefully which adds minimal forward momentum to the car. The reason turbos work is not because they are forcing more air, it’s because they are forcing more air which ALSO raises the compression ratio and the amount of fuel detonating (the MAF will sense the increased air density and add additional fuel to compensate). I.E. a turbo burns more fuel and therefore it produces more power. Hot air is less dense than cold air (why heat rises). Probably keeping the hot side of the turbo hot helps with gas expansion, perhaps that increases the force on the turbine? I’m not sure about that. But the intercooler is to cool the air on the compression side because cold air is denser. Which means more air into the cylinder, which means more fuel. Probably the colder air helps with auto detonation too which lets you push the compression ratio further if the pistons and cylinders can handle it.

WalterBright 2y ago

> The cold side heats up due to the compressive 'forces' (or whatever it's called) A gas heats up when it is compressed.

Lanolderen 2y ago

As a side note a lot of exhaust/turbo isolation in tuned cars also has to do with melting/overheating other things in the engine bay. Especially on street cars.