3 ms·
I've done this, without a case, not because I actually used huge amounts of power, but because neither PSU had the right combination of connectors. The second
by immibis 2y ago
I've done this, without a case, not because I actually used huge amounts of power, but because neither PSU had the right combination of connectors.
The second one was turned on with a paperclip, obviously.
Turns out graphics cards and hard drives are completely fine with receiving power but no data link. They just sit there (sometimes with fans at max speed by default!) until the rest of the PC comes online.
- 0x457 2y agoYou can also hookup a little thingy that takes sata power on one side and 24 pin on the other. As soon as there is power on sata side, relay switches and second PSU turns on.
- aaronmdjones 2y agoThis may not be fast enough for some add-in cards. It would be better to connect the PS_ON (green) cable from both ATX24 connectors together, so that the motherboard turns on both PSUs simultaneously. This would still have the disadvantage that the PWROK (grey) cable from the second PSU would not be monitored by the motherboard, leaving the machine prone to partial reset quirks during brown-outs. Normally a motherboard will shut down when PWROK is deasserted, and refuse to come out of reset until it returns.