8 ms·
Gunsmith Uses 3D Printer To Make A Rifle
- tjic 14y agoA long post on the topic of CNC, printing firearms, and more from a few months back: http://www.popehat.com/2011/10/06/the-third-wave-cnc-stereolithography-and-the-end-of-gun-control/ http://www.popehat.com/2011/10/06/the-third-wave-cnc-stereol...
- sp332 14y agoMan, they didn't show you that in Star Trek... edit: to be specific, they glossed over it instead of confronting a scenario where an enemy hijacked a replicator to make whatever physical or chemical weapons they wanted at a moment's notice.
- simcop2387 14y agoActually it was touched on in a number of episodes (which i don't feel like digging up) but in more than once instance they mentioned that the replicators had safety systems that prevented unauthorized creation of at least some dangerous materials, (from what i recall, poisons were mentioned in one, weapons themselves i'm not sure).
- pyre 14y agoTrue, but what could be poisonous to one species, could be nutritious to another. The idea that 'poisons' are easily identifiable is pure fantasy.
- angrow 14y agoEveryone on the Enterprise can breath the same air and eaet the same food. And if something is poison to even just a few of your crew, you forbid it and tell everyone else to eat almonds instead of peanuts. :nerdingout:
- sp332 14y agoA lot of things were "forbidden" by social pressures. Alcohol was freely available (or maybe a simple security override, I can't remember) but no one drank real alcohol.
- pyre 14y agoNote that they often invited aliens of unknown origin onto their ship (dignitaries, ambassadors, first contact, etc). This is hardly enforceable.
- aidenn0 14y agoTOS they made flintlock rifles in "Balance of Power" TNG "Samaritain Snare" Geordi is kidnapped by technically unsophisticated, but cunning people that use replicators to reproduce high-tech (including a phasor)
- adavies42 14y agoistr a ds9 novel (yes, i read some) where they had to replicate some machine guns to deal with invaders who had perfect shielding, but only against energy weapons. there were security overrides involved, but it had a large collection of projectile weapons to choose from once it was unlocked.
- jakeonthemove 14y agoWell, it's definitely possible to print a silencer, a pistol shouldn't be that much harder. I'm afraid that this would make the governments impose stricter laws on 3D printers, which is not a good thing...
- jff 14y agoA suppressor has no moving parts and serves only to baffle the expanding gas and reduce noise. It experiences relatively low heat and gas pressure. The components of a firearm have far tighter tolerances and must withstand significantly higher levels of pressure and heat. It's not even close to the same thing.
- ktizo 14y agoThis technology is used to print engine parts for F1 car racing - http://www.eos.info/en/products/systems-equipment/metal-laser-sintering-systems.html http://www.eos.info/en/products/systems-equipment/metal-lase... And it is only going to get cheaper - http://reprap.org/wiki/MetalicaRap http://reprap.org/wiki/MetalicaRap
- HeyLaughingBoy 14y agoPeople have been building guns for hundreds of years with far inferior tools.
- duaneb 14y agoI'd be more scared if they could successfully manufacture lethal ammunition.
- kwantam 14y ago(I don't know if this is sarcasm, but I'm answering with the assumption it's not.) Manufacturing ammunition is simple and requires components and equipment that can be purchased for relatively little money and with (almost) no restrictions. Buying gunpowder, primers, bullets, and casings is very possible via the internet (though gunpowder and primers are subject to hazardous shipping restrictions). After that, you could in principle make ammo using a 2x4 and a hammer if you really wanted to. A single-stage reloading press and the accoutrements can be obtained for under $200 trivially, and if you want to step up to relatively fast manufacture (hundreds of rounds per hour) you're still only talking a $500ish investment.
- jff 14y agoI might be reading it wrong, but it looks to me like he printed a receiver and placed all the moving parts and the barrel etc. in it. See "I printed a modified version of the lower from cncguns.com"
- Kallikrates 14y agoThe receiver is the only part of the rifle that is controlled. Everything other than the receiver can be bought on the internet without background checks or registering of serial numbers.
- jff 14y agoYes, I know that part, I was simply pointing out that he did not necessarily print out a barrel or trigger pin or any of the other many parts needed to make a whole pistol.
- f0untain 14y agoI guess 3D printers will be banned from the airports.
- Strallus 14y agoSeriously, what happened to real journalism? Articles are now being written based on a handful of unverified forum posts. Really?
- jessriedel 14y ago1) Betabeat isn't the NY Times. 2) Betabeat only reported that this forum existed and that someone had made these claim, which is indisputably correct. You may think it's not particularly news worthy, but online journalism is a big places and there's plenty of room for everything. 3) Would you rather this article not be written?
- cmelbye 14y agoNot to mention the gratuitous editorializing by the author throughout the article. Are there any technology news sites that are truly journalistic these days? (serious question)
- cubicle 14y ago1.) Blogspam. OP is http://www.webpronews.com/gunsmith-uses-3d-printer-to-make-a-rifle-2012-07 http://www.webpronews.com/gunsmith-uses-3d-printer-to-make-a... Does HN have any mods? 2.) Have blue has a blog, he's written two posts about this: http://haveblue.org/?p=1041 http://haveblue.org/?p=1041 http://haveblue.org/?p=1321 http://haveblue.org/?p=1321 It appears to be down right now, though. Cache links: https://webcache.googleusercontent.com/search?q=cache:DlBe32HJ0UsJ:haveblue.org/%3Fp%3D1041+&cd=1&hl=en&ct=clnk&gl=us&client=firefox-a https://webcache.googleusercontent.com/search?q=cache:DlBe32... https://webcache.googleusercontent.com/search?q=cache:Z_5bOFtsttMJ:haveblue.org/%3Fp%3D1321+&cd=1&hl=en&ct=clnk&gl=us&client=firefox-a https://webcache.googleusercontent.com/search?q=cache:Z_5bOF... 3.) He printed a AR-15 lower receiver, which is the part, under US law, considered a "firearm". The high pressure components (barrel, bolt) are all made from conventional manufacturing processes, using steel. Lowers are typically made out of aluminum, but they don't really experience any great stresses, so it's perfectly possible to make them out of plastic. (There's a number of commercial lowers made out of fiberglass: http://www.mdshooters.com/showthread.php?t=65134 http://www.mdshooters.com/showthread.php?t=65134 (I'd link directly to the manufacturer's site, but it seems they're better at making guns than they are at securing web servers)) As he notes, people have even carved them from wood.
- ChuckMcM 14y agoDoesn't pass the sniff test. Chamber pressure in a .22 cal pistol is on the order of 20,000 PSI [1] The tensile strength of thermoplastic at standard temperatures is 1/2 that [2] and it goes down as the temperature goes up (its a thermoplastic for a reason). Firing a .22 caliber round using gunpowder would destroy the barrel on the first firing. Now I could believe you built the receiver and triggering mechanism on a thermoplastic printer, but not the actual firing chamber. [1] http://www.lasc.us/SAAMIMaxPressure.htm http://www.lasc.us/SAAMIMaxPressure.htm [2] http://www.engineeringtoolbox.com/physical-properties-thermoplastics-d_808.html http://www.engineeringtoolbox.com/physical-properties-thermo...
- kwantam 14y agoThe part that's 3d printed is the lower receiver. In an AR-15 style design, the lower receiver doesn't handle any pressure at all, it just houses the magazine and hammer/trigger/sear/safety, and connects to the upper receiver/barrel assembly and the buttstock/buffer tube assembly. People have made lower receivers out of aluminum basically forever. Aluminum could maybe be made to handle .22lr type pressures, but certainly not .223rem or bigger. A plastic lower is completely believable. EDIT: to clarify, I meant if you wanted to make the whole gun out of aluminum you might be able to get away with it for a .22lr. Aluminum for a lower receiver is absolutely no problem at all. Apologies for not being clear.
- cubicle 14y agoAluminum could maybe be made to handle .22lr type pressures, but certainly not .223rem or bigger. ? The Alexander Arms .50 Beowolf lower is made out of aluminum. http://www.gunblast.com/50Beowulf.htm http://www.gunblast.com/50Beowulf.htm You can also buy single-shot .50 BMG uppers that bolt right onto regular aluminum AR-15 lowers, though of course you can't feed .50 BMG through a 5.56 magazine well.
- ChuckMcM 14y agoWell there was this story (http://boingboing.net/2011/09/20/3d-printed-ar-15-parts-challenge-firearm-regulation.html http://boingboing.net/2011/09/20/3d-printed-ar-15-parts-chal...) on BoingBoing in September of last year that was later determined to be a hoax according to the Makerbot folks at the Makerfaire this year.
- ef4 14y agoAny competent machinist can make functional semiautomatic weapons. This is just the next step in making it even easier. If the United States ever got serious about banning firearms, a massive homebrew industry would grow up overnight. Gunpowder is not fundamentally harder to make than methamphetamine. People who quite rightly see our drug laws as pointless and ineffective somehow often miss that a gun ban would be no more effective in the United States. If you want there to be less drugs or guns, you have to attack the demand side, not the supply side. Suppressing supply while keeping demand steady just ensures higher margins for the suppliers.
- HeyLaughingBoy 14y agoExactly. See my post about making guns by hand. As a 12 year old boy I was making gunpowder from drugstore items and launching rockets made from rolled-up newspaper. This stuff ain't hard to do!!
- grecy 14y agoOf course. Let's pretend Billy Bob is a heated rage because he just found out so-and-so slept with so-and-so (or whatever). What's more likely? a) He walks around to so-and-sos house with his legally purchased, unlicensed, unregistered semi automatic assault rifle and 1000+ rounds, and kills the whole family, and anyone else unlucky enough to be nearby. or b) He spends days (weeks?) making his own gun, gunpowder and projectile by hand, and is still motivated all those days later to walk around and kill everyone, with a small caliber, (probably) non-semi automatic, (probably) small/no magazine. Gun control won't stop people killing each other with guns. It will make it many times harder for the average Joe, therefore it will reduce the frequency, and the overall homicide rate.
- timdiggerm 14y agoAnd that's the big question: What percentage of homicides are done spur of the moment by people who would not acquire weapons illegally under a ban?
- OmegaHN 14y ago
- ryanmarsh 14y agoI love how HN jumps immediately into a gun control debate and almost completely misses the fact that what he printed is a long way from an AR-15. It's just a piece of metal called the lower receiver. When I say lower receiver, I believe he built just the shell not the trigger assembly or bushings. In addition, the bolt and barrel (the upper) weren't manufactured. But lets assume for a minute that he printed the entire thing from scratch, how is this any different than the fact that anybody with a good machine shop can produce a full AR-15 by hand?
- sneak 14y agoTo be clear: he made a lower receiver, a very simple part and the one that has the serial number stamped onto it, it is the "gun" part as far as the legal authorities are concerned. Every other part (upper receiver, barrel, magazine, trigger, hammer, etc) are just "parts" that one can order untracked. Making an entire functional weapon is still beyond the scope of most inexpensive printers. http://www.quora.com/3D-Printing/How-much-does-it-cost-today-June-2012-to-purchase-a-3D-printer-that-can-print-all-of-the-parts-to-assemble-a-functional-AK-47 http://www.quora.com/3D-Printing/How-much-does-it-cost-today... (my question about this on Quora.)