3 ms·
Most electronics are run through a 'dishwasher' as part of manufacturing. Hot water removes a lot of gunk that if left causes earay failure. chips are plastic,
by bluGill 2y ago
Most electronics are run through a 'dishwasher' as part of manufacturing. Hot water removes a lot of gunk that if left causes earay failure. chips are plastic, the board is fiberglass, the resisters are ceramic or plastic most capacters are ceramic, the conductors are metal - none of that cares about water once it dries. The only thing to worry about is impurities in the water since they can leave something conductable behind. Some capacters however cannon take water. Likewise I'm note sure if LCDs are sealed enough.
be careful of what soap you use though, dishwasher soap is too harsh. Manufactures are using deionized water and if any soap it is specific to electronics. Your house water isn't pure enough to do this often but once ever few years and you will normally get away with it.
- KennyBlanken 2y agoYes, electronics are often washed...in ultrapure water. Very briefly, and then immediately dried. LCDs are definitely not sealed enough, many capacitors are electrolytic, and fiberglass is not impermeable to water (in fact, water-logged fiberglass is an issue for boats in areas where weather causes freeze-thaw cycles.) Your dishwasher is full of mineral deposits, food waste particles, and likely quite a bit of mold. Getting rid of all of that would involve dissolving deposits with vinegar or citric acid, then running some lye or similarly aggressive treatment to get the mold and organic waste out. That's a lot of hassle. You can't put "soap" in a dishwasher unless you want a giant bubble factory. So now you're looking at trying to find a specialty cleaner. Most people's water is not nearly pure enough for the keyboard to not have issues afterward. You MIGHT get away with it if you thoroughly blasted it with compressed air and then dunked it in distilled water. That's a huge amount of hassle. Unless something has been spilled on the keyboard, just periodically brush out debris and then hit it with compressed air...
- bluGill 2y agoMany have proven you wrong with the model M. For other electronics your point stands beware that some will have no issues and some will