5 ms·

In case anyone using a myQ opener comes across this, I feel the need to mention ratgdo which many have found to be a great inexpensive upgrade. https://ratclou

In case anyone using a myQ opener comes across this, I feel the need to mention ratgdo which many have found to be a great inexpensive upgrade. https://ratcloud.llc/ https://ratcloud.llc/

grahamj 2y ago
I'm aware but I'm one of the like 5 people that bought the overpriced MyQ-HomeKit adapter and it's still working to provide HA control. If it ever dies I'll be going ratgdo or opengarage for sure
dingnuts 2y ago
It's inexpensive if you discount the cost of your education learning how to wire in something like that. There's an order of magnitude difference in project size between setting up the old MyQ integration with home assistant and learning how to use.. whatever that thing is. Sometimes I think clever and educated people forget what it's like to be less intelligent or educated. I want a solution I can download :(
- lotsofpulp 2y ago
  Perhaps an iSmartGate Pro works? https://ismartgate.com/ismartgate-pro/ https://ismartgate.com/ismartgate-pro/
- michaelmior 2y ago
  That's a fair point, but it's still likely less expensive than replacing your existing opener if you include the cost of an electrician doing the wiring for you.
  - NordSteve 2y ago
    It's really not hard at all. It probably took 5 minutes to install, with most of the time futzing with the power cable routing so that it looked decent and didn't rub on sharp corners of the opener bracket.
    - michaelmior 2y ago
      I agree that it's not challenging. I'm just saying that even if someone is intimidated by doing this, it's still probably a relatively inexpensive option even when you include hiring an electrician.
- aidenn0 2y ago
  May I suggest OpenGarage? https://opengarage.io/ https://opengarage.io/
- 15155 2y ago
  You only need to reconfigure 4-6 color-coded, low-voltage wires in exactly one spot (at the opener.) Clear picture instructions are provided. If you're using Home Assistant at all, you are more than capable of installing this device. The old MyQ HA integration was absolutely more difficult to configure and install.
pininja 2y ago
Can this detect if you’re left your garage door open for a while and notify me?
- room500 2y ago
  I added ratgdo to my HomeAssistant and have HomeAssisteant send notifications if the garage door is open (with a button that closes it)
- sedatk 2y ago
  As long as it can report open/close status, you can create an automation for that. That’s what I did.
eddieroger 2y ago
I installed a pair of these, and haven't looked back. Yes, there is a little bit of a curve with rewiring your opener, but there is great documentation available, and safety in the fact that if you mess up, your door just won't open. If you snap a picture ahead of time, it's easy to undo. And from there, you can hook it in to Home Assistant or HomeKit and do whatever you want, which is amazing. My Home Assistant notifies me when the door has been open for 5, 10, 30, 60 minutes, as well as if the sensor is obstructed for the same intervals.
progman32 2y ago
Second this product. I wanted an Ethernet version so I made my own (it's integrated into esphome and the circuit is documented here https://github.com/Kaldek/rat-ratgdo https://github.com/Kaldek/rat-ratgdo). Apart from general usage, I use mine to tilt the garage door a small amount if it detects bad air quality in my shop (using an IKEA air quality sensor via home assistant).

In case anyone using a myQ opener comes across this, I feel the need to mention ratgdo which many have found to be a great inexpensive upgrade. https://ratcloud.llc/ https://ratcloud.llc/

grahamj 2y ago

I'm aware but I'm one of the like 5 people that bought the overpriced MyQ-HomeKit adapter and it's still working to provide HA control. If it ever dies I'll be going ratgdo or opengarage for sure

dingnuts 2y ago

It's inexpensive if you discount the cost of your education learning how to wire in something like that. There's an order of magnitude difference in project size between setting up the old MyQ integration with home assistant and learning how to use.. whatever that thing is. Sometimes I think clever and educated people forget what it's like to be less intelligent or educated. I want a solution I can download :(

lotsofpulp 2y ago
Perhaps an iSmartGate Pro works? https://ismartgate.com/ismartgate-pro/ https://ismartgate.com/ismartgate-pro/
michaelmior 2y ago
That's a fair point, but it's still likely less expensive than replacing your existing opener if you include the cost of an electrician doing the wiring for you.
- NordSteve 2y ago
  It's really not hard at all. It probably took 5 minutes to install, with most of the time futzing with the power cable routing so that it looked decent and didn't rub on sharp corners of the opener bracket.
  - michaelmior 2y ago
    I agree that it's not challenging. I'm just saying that even if someone is intimidated by doing this, it's still probably a relatively inexpensive option even when you include hiring an electrician.
aidenn0 2y ago
May I suggest OpenGarage? https://opengarage.io/ https://opengarage.io/
15155 2y ago
You only need to reconfigure 4-6 color-coded, low-voltage wires in exactly one spot (at the opener.) Clear picture instructions are provided. If you're using Home Assistant at all, you are more than capable of installing this device. The old MyQ HA integration was absolutely more difficult to configure and install.

pininja 2y ago

Can this detect if you’re left your garage door open for a while and notify me?

room500 2y ago
I added ratgdo to my HomeAssistant and have HomeAssisteant send notifications if the garage door is open (with a button that closes it)
sedatk 2y ago
As long as it can report open/close status, you can create an automation for that. That’s what I did.

eddieroger 2y ago

I installed a pair of these, and haven't looked back. Yes, there is a little bit of a curve with rewiring your opener, but there is great documentation available, and safety in the fact that if you mess up, your door just won't open. If you snap a picture ahead of time, it's easy to undo. And from there, you can hook it in to Home Assistant or HomeKit and do whatever you want, which is amazing. My Home Assistant notifies me when the door has been open for 5, 10, 30, 60 minutes, as well as if the sensor is obstructed for the same intervals.

progman32 2y ago

Second this product. I wanted an Ethernet version so I made my own (it's integrated into esphome and the circuit is documented here https://github.com/Kaldek/rat-ratgdo https://github.com/Kaldek/rat-ratgdo). Apart from general usage, I use mine to tilt the garage door a small amount if it detects bad air quality in my shop (using an IKEA air quality sensor via home assistant).