5 ms·
I wanted a nixie clock and there are three options: 1) Build yourself, using second-hand tubes (typically 'new old stock' which means Soviet-era but unused) an
by rjh29 2y ago
I wanted a nixie clock and there are three options:
1) Build yourself, using second-hand tubes (typically 'new old stock' which means Soviet-era but unused) and your own PCB or a kit. Lots of these kits online, but be warned it involves high voltages, so not a good beginner project. IN-12 tubes are small and easy to find, larger tubes are more expensive.
2) Pay someone else to make a hand-made one - very expensive
3) Buy a Chinese one. Some of these use real nixie tubes (add 'IN-12' to your search) and cost $50-ish. There are many products titled nixie tube that actually use LCD screens and look terrible.
I settled on the PV electronics QTC kit and some tubes from eBay that were pre-soldered to QTC mounts. They can literally just be plugged into the kit and replaced easily if they fail.
- tecleandor 2y agoI finally took a different path and did it with VFD. No high voltage, they're cheaper, and one could say VFDs and Nixies are family :p I took the open source project Flora-ESP8266 [0] in the IV-22 size, changed a couple things in the BOM that weren't available, and ordered a bunch of pcbs. Now I have a bunch of extra PCBs that I could use to build extra clocks :-) I would have loved to change the PCB to use an ESP32 instead, because that project uses ESP8285 (something like an 8266 but a bit more powerful) and those are harder to come by today. 0: https://github.com/mcer12/Flora-ESP8266
- adrian_b 2y agoVFDs are also nice, but for decorative purposes I like more the sight of gas tubes with cathodic light, like Nixies, where you see the light being generated in an apparently empty space, instead of coming from inside a solid, like in VFDs, CRTs, LEDs, incandescent lamps or fluorescent lamps.
- asddubs 2y agoSome VFDs do fit that bill https://www.tube-tester.com/sites/nixie/different/futura/futura-front-det.jpg https://www.tube-tester.com/sites/nixie/different/futura/fut...
- tecleandor 2y agoTrue, this IV-22 modules, that are individual digits, look a bit more like a Nixie than the classic flat VFD display of an old CD player or a vending machine (of course, not the same): https://raw.githubusercontent.com/mcer12/Flora-ESP8266/main/Images/IV22_1.jpg https://raw.githubusercontent.com/mcer12/Flora-ESP8266/main/... My idea is also painting the interior of the clock with a super matte black paint (Black 3.0 from Culture Hustle) so it looks a bit more like if the numbers were floating there...
- msarnoff 2y agoNumitrons are another option; they only require 5V to light the segments. They have a very strange, almost steampunk aesthetic (though Technology Connections is not a fan…) Unlike Nixies or VFDs, they emit a broad spectrum of light, so you can put any color filter you like in front of them (red, green, blue) I made an alarm clock from some unusual Soviet 9-segment Numitrons a while ago. The code/design is in GitHub as well as a link to a video. https://github.com/74hc595/Numitron-Clock https://github.com/74hc595/Numitron-Clock
- tecleandor 2y agoOh nice! I'll save that on my list of cool displays. I might do something with them one day... (Same as with the bunch of vintage HP QDSP-6064 tiny bubble displays that I have. I bought a dozen of them for a dollar or two each some years ago, when some NOS stock appeared by surprise, but now they're running like 20 to 40$ a piece in eBay if you can find them.)
- Analemma_ 2y agoAn additional point on 1): if you buy a DIY kit online, be prepared to get a package full of SMT chips, not ones that can be soldered by hand unless you have very stable hands. You'll need a reflow oven, heat gun, or some other way to get SMTs onto a PCB.
- LM358 2y agoI disagree. Most SMD components are perfectly fine to solder by hand. Using a good soldering station with a knife cartridge makes the job much easier. Same with a microscope, but I home I use a headband with magnifying glasses. It does of course take some more practice than through hole components and in many cases it's easier to solder them in an oven, but then you need solder paste and preferably a stencil. The only types where I'd reach for a heat gun are packages like TO-252 and TO-263 where the backside is soldered directly to a pad on the PCB, but for hobbyist purposes I think even that could be doable with a powerful iron and a large tip.
- tecleandor 2y agoYep, I discovered late than SMD parts were way easier to solder than I expected. Sometimes even easier and faster than thru-hole components if they aren't too small, as you don't have to be flipping the board back and forth all the time. I just bought a couple of super cheap SMD soldering learning kits from AliExpress and spent an afternoon or two practicing. They are just 1 or 2 dollars each. Those kits are just a small PCB with a bunch of SMD resistors and stuff you can solder. When you finish you can measure the resistance of the whole circuit to check if you've soldered them all properly or you've shorted or killed any of the components. Some of them have also a couple SOP and QFP footprint chips or even some LEDs on a functioning circuit, so you can power it later and see if it works. Edit: Corrected QFN for QFP
- RF_Savage 2y agoOutside of QFN, DFN and BGA, I do most of my smd soldering by hand, no reflow (toaster) oven required. Just an iron with a suitable tip is what I have required so far.
- 2y ago
- msarnoff 2y ago4) Salvage a broken piece of test equipment like a frequency counter or multimeter. If the tubes light up, swap out the control circuitry for an Arduino or your microcontroller of choice. It’ll already have the high voltage DC supply and maybe even some 74141 decoder/driver chips. (Just don’t spend a lot of money on something that deserves to be restored.)
- iancmceachern 2y agoThere are now many suppliers if kits, just search nixie kit and there are lots of suppliers. There are even companies making new nixie tubes now.