5 ms·

Jellyfin 10.10.0

43 points by xbmcuser 2y ago

harrigan 2y ago
For me, Jellyfin makes my smart TV (running webOS) tolerable. It turns the TV into the appliance it should have been from the start, without ads, AI assistants, or silly apps.
- RadiozRadioz 2y ago
  Yes, it is becoming increasingly difficult to buy a non-smart TV. I don't like living in a world where my TV can crash or be down for a software update (which have both happened to me). They're also ticking time-bombs - who knows when support will be dropped and the apps will slowly break as they gradually fall out of compatibility with the external APIs they depend on. What horrors lurk in the depths of those lovelessly constructed TV OSs that call out to servers and will cause mayhem when those servers are decommissioned?
  - al_borland 2y ago
    My dad had a Blu-ray player that had similar features to a smart TV (Netflix, etc). There was a licensing sever and the API was down, so everything stopped working. A single point of failure for the whole device.
    - pridkett 2y ago
      That might’ve also been the September 6, 2022 Google Widevine license issue. This broke DRM protected content across most android based devices. It wasn’t a single point of failure for a device. It was a single point of failure for the whole media ecosystem. [0]: https://status.drmtoday.com/incidents/w2wbtnn9r67y https://status.drmtoday.com/incidents/w2wbtnn9r67y
  - deadbunny 2y ago
    > What horrors lurk in the depths of those lovelessly constructed TV OSs that call out to servers and will cause mayhem when those servers are decommissioned? My Sony TVs all work without an internet connection, so I'd guess nothing?
  - s17tnet 2y ago
    Keep them airgapped or use a smart HDMI stick, their support typically outperform anything from the TV vendor and you can install apps (e.g. Jellyfin) on them. If you dislike Google or Amazon there are some Linux based options. There is also HDMI over-radio but I don't know its limits (range, bandwidth, latency).
  - nerdjon 2y ago
    Why not just never connect it to the internet and never update the firmware? I do wish I could just buy a dumb tv that just did TV things… but it’s simple to just use an Apple TV and never connect it. Or if I absolutely must to set it up or because there is a bug. Connect it via Ethernet briefly. Better for privacy too.
    - snapplebobapple 2y ago
      This plus an n100 running hyorjellynix witg a firetv remote ftw.
      - woleium 2y ago
        hyorjellynix?
        snapplebobapple 2y ago
        https://github.com/zombiehoffa/hyprjellynix https://github.com/zombiehoffa/hyprjellynix
        woleium 2y ago
        ty!
deleted 2y ago
[deleted]
sebazzz 2y ago
I wonder why anyone would use Jellyfin4Kodi, because Kodi does a good job by itself?
- compsciphd 2y ago
  because you want to access your library from multiple locations and have everything kept in sync. ex: started watching a show on tv at home, left to take public transportation to work, continue watching on way to work on phone, continue watchin on phone on way home, continue watching on tv when get home.
  - deleted 2y ago
    [deleted]
  - bestouff 2y ago
    This. I had a working kodi install, but I migrated to Jellyfin+kodi and it's miles better.
- zeagle 2y ago
  I found that 4k HDR/DV DTS Atmos media on my shield tv tube would have issues with freezing after seeking and audio drop outs with kodi/kodi with jellyfin plugin. Switching to jellyfin solved the issue.
nerdjon 2y ago
I really wish we had a better tvOS (Apple TV) app for Jellyfin. I use swiftfin primarily and it works well enough but has some rough edges. After switched from plex after their downtime caused my local server to not work (and just the direction of plex seems to be moving away from its original intention). I have tried (and continue to pay for in hopes it gets better) infuse. And it works great when it properly has my library, but it constantly has issues of loosing my library and just forever “refreshing” or just never showing my library.
- skygazer 2y ago
  I had constant syncing problems between Infuse and Jellyfin previously. The first sync after clearing the cache would succeed, but all subsequent updates would fail with a nondescript error on the server. I managed to fix it by scanning for errors in media files by writing a script to walk the library and output ffmpeg copy errors, and either repairing or ditching the broken files. I guess it was just choking on one of them.
  - nerdjon 2y ago
    Interesting, I figured infuse was just looking at metadata provided by jellyfin and I would not think any of the files themselves would matter at that point? I don't have a particularly large library either (at least compared to what I assume many would have) so never really understood what was happening. I am curious about the file issue though, I have not had any issues with any files I have watched through the jellyfin appletv app.

43 points by xbmcuser 2y ago

For me, Jellyfin makes my smart TV (running webOS) tolerable. It turns the TV into the appliance it should have been from the start, without ads, AI assistants, or silly apps.

RadiozRadioz 2y ago
Yes, it is becoming increasingly difficult to buy a non-smart TV. I don't like living in a world where my TV can crash or be down for a software update (which have both happened to me). They're also ticking time-bombs - who knows when support will be dropped and the apps will slowly break as they gradually fall out of compatibility with the external APIs they depend on. What horrors lurk in the depths of those lovelessly constructed TV OSs that call out to servers and will cause mayhem when those servers are decommissioned?
- al_borland 2y ago
  My dad had a Blu-ray player that had similar features to a smart TV (Netflix, etc). There was a licensing sever and the API was down, so everything stopped working. A single point of failure for the whole device.
  - pridkett 2y ago
    That might’ve also been the September 6, 2022 Google Widevine license issue. This broke DRM protected content across most android based devices. It wasn’t a single point of failure for a device. It was a single point of failure for the whole media ecosystem. [0]: https://status.drmtoday.com/incidents/w2wbtnn9r67y https://status.drmtoday.com/incidents/w2wbtnn9r67y
- deadbunny 2y ago
  > What horrors lurk in the depths of those lovelessly constructed TV OSs that call out to servers and will cause mayhem when those servers are decommissioned? My Sony TVs all work without an internet connection, so I'd guess nothing?
- s17tnet 2y ago
  Keep them airgapped or use a smart HDMI stick, their support typically outperform anything from the TV vendor and you can install apps (e.g. Jellyfin) on them. If you dislike Google or Amazon there are some Linux based options. There is also HDMI over-radio but I don't know its limits (range, bandwidth, latency).
- nerdjon 2y ago
  Why not just never connect it to the internet and never update the firmware? I do wish I could just buy a dumb tv that just did TV things… but it’s simple to just use an Apple TV and never connect it. Or if I absolutely must to set it up or because there is a bug. Connect it via Ethernet briefly. Better for privacy too.
  - snapplebobapple 2y ago
    This plus an n100 running hyorjellynix witg a firetv remote ftw.
    - woleium 2y ago
      hyorjellynix?
      - snapplebobapple 2y ago
        https://github.com/zombiehoffa/hyprjellynix https://github.com/zombiehoffa/hyprjellynix
        woleium 2y ago
        ty!

deleted 2y ago

[deleted]

sebazzz 2y ago

I wonder why anyone would use Jellyfin4Kodi, because Kodi does a good job by itself?

compsciphd 2y ago
because you want to access your library from multiple locations and have everything kept in sync. ex: started watching a show on tv at home, left to take public transportation to work, continue watching on way to work on phone, continue watchin on phone on way home, continue watching on tv when get home.
- deleted 2y ago
  [deleted]
- bestouff 2y ago
  This. I had a working kodi install, but I migrated to Jellyfin+kodi and it's miles better.
zeagle 2y ago
I found that 4k HDR/DV DTS Atmos media on my shield tv tube would have issues with freezing after seeking and audio drop outs with kodi/kodi with jellyfin plugin. Switching to jellyfin solved the issue.

nerdjon 2y ago

I really wish we had a better tvOS (Apple TV) app for Jellyfin. I use swiftfin primarily and it works well enough but has some rough edges. After switched from plex after their downtime caused my local server to not work (and just the direction of plex seems to be moving away from its original intention). I have tried (and continue to pay for in hopes it gets better) infuse. And it works great when it properly has my library, but it constantly has issues of loosing my library and just forever “refreshing” or just never showing my library.

skygazer 2y ago
I had constant syncing problems between Infuse and Jellyfin previously. The first sync after clearing the cache would succeed, but all subsequent updates would fail with a nondescript error on the server. I managed to fix it by scanning for errors in media files by writing a script to walk the library and output ffmpeg copy errors, and either repairing or ditching the broken files. I guess it was just choking on one of them.
- nerdjon 2y ago
  Interesting, I figured infuse was just looking at metadata provided by jellyfin and I would not think any of the files themselves would matter at that point? I don't have a particularly large library either (at least compared to what I assume many would have) so never really understood what was happening. I am curious about the file issue though, I have not had any issues with any files I have watched through the jellyfin appletv app.