3 ms·
Is there a specific reason why this ship is vertical? Or just because we can?
by Swizec 14y ago
Is there a specific reason why this ship is vertical? Or just because we can?
- zalew 14y agoFLIP is designed to study wave height, acoustic signals, water temperature and density, and for the collection of meteorological data. Because of the potential interference with the acoustic instruments, FLIP has no engines or other means of propulsion. It must be towed to open water, where it drifts freely or is anchored. http://en.wikipedia.org/wiki/RP_FLIP http://en.wikipedia.org/wiki/RP_FLIP
- goblin89 14y agoVertical ship like that is quite stable due to immunity to surface waves. Make sure to read background info links provided by jeroen, interesting stuff.
- Toucan 14y agoAdditionally it has a very low centre of gravity, further increasing stability.
- s_henry_paulson 14y agoThe farther down you go, the more calm the water is. The boat basically becomes it's own anchor, anchoring itself in the calm water under the surface.
- D_Alex 14y agoNo... the reason it is stable is because a) the waterplane area is small compared to the overall mass of the vessel; and b) the natural frequency of the vessel is far removed from the forcing frequency (wave frequency). Think of it this way: The vessel in perfectly calm water will sit at a particular level. Now a wave comes, and briefly the force acting on the ship is "proportional" to the buoyancy volume, ie height of the wave and the area of water that the hull intersects. Nothing can be done about the wave height, but the waterplane area can be reduced, minimising the force. The price you pay for that is a low payload. Now if the vessel had a natural frequency of bobbing up and down close to the frequency of the waves, a resonance could occur which would amplify the motions. But the natural frequency of such a structure is by design very low, many times lower than the wave frequency, so resonance does not occur. Other structures which operate on the same principle are semi-submersible drilling/production vessels (see http://en.wikipedia.org/wiki/Semi-submersible http://en.wikipedia.org/wiki/Semi-submersible) and "spar" type oil production platforms (http://en.wikipedia.org/wiki/Spar_(platform) http://en.wikipedia.org/wiki/Spar_(platform)). The need to support a heavy payload on these structures makes the design quite challenging, as a good compromise must be found between hull cost, payload and low motions. Interestingly, another type of oil platform, the tension-leg platform, takes the opposite approach of having a very stiff anchoring system and a high natural frequency to achieve the same effect of low vertical motion in heavy seas. (I am an engineer in the oil and gas industry with many years of deepwater development experience).
- b_emery 14y agoIt becomes a spar buoy: http://en.wikipedia.org/wiki/Spar_buoy http://en.wikipedia.org/wiki/Spar_buoy