3 ms·
Unloading can be complex also I would think, in that you have to maintain balance on the ship so it doesn't list or even roll over. You can't just grab the near
by SoftTalker 2y ago
Unloading can be complex also I would think, in that you have to maintain balance on the ship so it doesn't list or even roll over. You can't just grab the nearest container with your crane.
- superice 2y agoYes, although that's the same for loading. As a general rule, container ships are unloaded tier-by-tier, breadth-first if you will, not shaft-by-shift (depth-first), so this is not much of a problem in practice. That does start to change if you want to do simultaneous loading and unloading operations, then you'd want to clear out a vertical shafts first so you can start loading operations as quickly as possible. Which is one of the many reasons dock workers hate that style of operations.
- bee_rider 2y agoClearly, should have used a queue instead of a stack!
- bee_rider 2y agoI wonder if unloading is in some sense greedy, in a way that loading isn’t. I have no justification for thinking so, just a gut feel.
- superice 2y agoThat's a pretty reasonable mental model. The only real requirement during unloading is ship stability, other than that just use max concurrency with all the cranes and equipment to max throughput. Even just on the crane level, you can just keep unloading stuff to shore, and wait until vehicles pick them up. If they are slow, just keep on unloading until they catch up. Chance of stalling ops is close to zero. Loading operations are much more variable, especially if your yard is not stacked well and you need to 'dig out' specific containers. If you run out of containers underneath your crane, your operations are stalled until the terminal vehicles catch up and bring you new boxes to load.
- Animats 2y ago> Even just on the crane level, you can just keep unloading stuff to shore, and wait until vehicles pick them up. If they are slow, just keep on unloading until they catch up. Chance of stalling ops is close to zero. It's not done that way, much. When a container is taken off a ship, it's usually placed on something that moves - a truck chassis, a railroad car, or an AGV. If you clutter up the dock with containers, unloading will stall. Using human-driven trucks on the dock side: [1] Full automation with AGVs: [2] [1] https://www.youtube.com/watch?v=youKZCUZGlw https://www.youtube.com/watch?v=youKZCUZGlw [2] https://www.youtube.com/watch?v=zm_rlLyelQo https://www.youtube.com/watch?v=zm_rlLyelQo
- superice 2y agoFair enough, I was thinking of terminals one step smaller where reachstackers or straddle carriers directly drive to and from the quay. On bigger terminals it’s a much more interlinked process indeed. See https://youtu.be/in2Q1KgqVIQ?si=7kzBKQGtrXyAbZEi https://youtu.be/in2Q1KgqVIQ?si=7kzBKQGtrXyAbZEi
- Animats 2y agoSeveral steps smaller: Royal Portbury Dock.[1] This is a small container port with a two lane access road. Not much traffic. No automation. Container stacks are only two high, three high at most. Driver is led through stacks of containers until they find the one they want to pick up. After some yelling, someone driving a stacker removes the container from the top of the one they want, then loads the desired container onto the truck chassis. Although there's one container ship at quayside, no loading or unloading seems to be happening. There's a very British feel to all this. [1] https://www.youtube.com/watch?v=eDXzIACg3j0 https://www.youtube.com/watch?v=eDXzIACg3j0
- superice 2y agoYep, that's more my class of customers. The height limitation is probably because of the gantry crane. In my experience having the truck driver follow the reachstacker is kind of uncommon, you'd ideally either tell the truck driver where to go from the gate, or just have the stacker drive across the terminal. This seems like the worst of both worlds. Perhaps a union or regulation thing about minimizing driving around with a reachstacker holding a box? Fascinating business nonetheless, this is definitely something different than I'm used to over in NL/BE. Thanks for sharing!