3 ms·
Obviously, most of this is prefab...so I wonder how much time was spent building all the individual pieces before the official ground breaking? With 220 floors
by danso 14y ago
Obviously, most of this is prefab...so I wonder how much time was spent building all the individual pieces before the official ground breaking?
With 220 floors and 104 elevators...that's more than 2 floors and 1 elevator a day. I imagine just the fitting/assembling in place process per floor is enough to fill up a third of a day on its own...so is this basically a huge vertical jigsaw puzzle in which the pieces have been made and just need to be moved onto site?
- curt 14y agoTheir wikipedia page said 7 months in total, with a 90-day on-site construction time.
- brudgers 14y agoThere's always a lead time. But the pace at which prefabricated items can be built in a factory is significantly greater than that at which items can be site built. The constraints on an urban site are a significant logistical problem - site fabrication requires lots of different trades arriving through city traffic at the same time because there isn't much space in which materials may be staged. Every trade adds to the traffic through which other trades must transport their materials. Conversely, prefabricated units can be built virtually anywhere and shipped economically over long distances...i.e. fabrication can occur at a factory in a rural location and assemblies can be moved by rail or barge.
- ippisl 14y agoDo you think it's practical to ship the pieces from china to the u.s. or europe ?
- carbocation 14y agoThat is common practice already.
- drawsomethingn 14y agoany links related?
- carbocation 14y agohttp://www.alibaba.com/countrysearch/CN/prefab-shipping-container-homes.html http://www.alibaba.com/countrysearch/CN/prefab-shipping-cont...
- adpowers 14y agoThey are doing that with the Bay Bridge: http://www.nytimes.com/2011/06/26/business/global/26bridge.html?pagewanted=all http://www.nytimes.com/2011/06/26/business/global/26bridge.h...
- brudgers 14y agoI worked on a Low Income Housing Tax Credit project where the developer had granite countertops and solid wood cabinets shipped from China for roughly the same cost as standard economy cabinets and commodity laminate countertops. What made it practical was the specifics of LIHTC funding. A significant amount of the funds had to be spent upfront on materials and/or labor or it would have been lost. This made the long lead time beneficial because early stages of construction such as clearing and grubbing are relatively inexpensive whereas finishes are relatively expensive. http://en.wikipedia.org/wiki/Low-Income_Housing_Tax_Credit http://en.wikipedia.org/wiki/Low-Income_Housing_Tax_Credit
- ChuckMcM 14y agoThat was one of the questions I was wondering about. I recently looked at a new factory in the bay area of prefab houses (http://www.youtube.com/watch?v=UmpRRoNqsDI)and http://www.youtube.com/watch?v=UmpRRoNqsDI)and one of their claims is they can put up a house in 7 days. But of course it isn't that they start with dirt and 7 days later there is a house, there is a time to build the foundation, and the house is built in a factory, but once the foundation is ready and the house manufactured, it only takes 7 days to install and unfold it. Which is still pretty cool. So one way this headline could be strictly true is if all of the floors of the building were fabricated off site, once they were ready the company might be able to assemble the final building, in a prepared foundation, in 90 days. That is the only interpretation I can think of that works. Concrete can take 4 weeks to get to 90% strength [1], so if you didn't do the prefab route you would have to spend more than 90 days just waiting for the lower levels to cure so that you could build the upper levels. I am interested in what they are trying to do though, it sounds like an interesting challenge. [1] http://en.wikipedia.org/wiki/Concrete#Curing http://en.wikipedia.org/wiki/Concrete#Curing
- brudgers 14y ago>"Concrete can take 4 weeks to get to 90% strength [1], so if you didn't do the prefab route you would have to spend more than 90 days just waiting for the lower levels to cure so that you could build the upper levels." Concrete made with Type III portland cement achieves most of its strength within seven days (concrete made with normal (Type I) cement reaches its design strength in 28 days). When one needs significant strength more quickly, the mix can be adjusted to provide a higher ultimate strength than is required for the intended loads during the normal life of the building and accelerants added . This results in adequate capacity for construction to continue in as little as a few hours.
- abduhl 14y agoThe general rule of thumb is 75% of 28-day strength in 7 days. Most concrete mixtures reach their design strength well before 28 days due to the fact that any particular batch of concrete will be mixed such that its 28-day strength is higher than the design strength by a few 10s of %s. This is due to the fact that failing a compressive strength test for any one test or any 3 averaged consecutive tests (guidelines are set forth for failure criteria in ACI) requires remedial action in general.
- Morg 14y agoPrefab is typically something you can easily multithread, in this case since it's a benchmark you could go all-out and just run 55 floor threads, that would give you 4 floors constructed in 90 days, which is rather slow for a 24/7 manufacturing line. Every construction endeavor is a puzzle. The fitting assembling in place process per floor is not relevant either, as that can be multithreaded too. The only thing that is going to limit throughput in this case is mostly the cranes, and you can safely assume there'll be more than one and it shouldn't take more than two hours on average to safely put one floor into place - that gives you a throughput of 12 floors a day per crane, not a bottleneck (except cranes have to be moved up all the time, so they don't have 100% uptime - again as you have multiple cranes this may simply end up as 2 fulltime crane equivalents for 4 cranes, but still not a bottleneck). In the end, even it it takes one team 20 days to make one floor, and another team 20 days to attach/finish the floor, including windows and all, you still have 50 days left for foundations, moving cranes around, etc. Think multithread and work splitting, it'll all look far more realistic - and even beatable - then.