6 ms·

Air Quality Monitors Compared: AirGradient One vs. Airthings

76 points by ahaucnx 2y ago

mbStavola 2y ago
I plan to pick up some AirGradient units and phase out my AirThings devices simply because I want to keep all my data local and open. However, I do wish 1) it could monitor Radon and 2) had a PoE powered sku.
- ahaucnx 2y ago
  Yes, these things have come up quite a few times. Regarding Radon there are unfortunately no 3rd party sensor modules available that we know off (and are reasonably priced). If you know any, please let us know. Regarding PoE, we have made a survey some time ago and less than 5% of the users were interested in PoE. However, the hardware integration is not straight forward and it would increase the price of the unit for all customers. This is the main reason we did not do it yet. However our open hardware has an extension plug and this could be an excellent community project for somebody to develop this as an extension card and then share the design.
  - xoa 2y ago
    So fully recognizing upfront my own bias towards this feature, and that lack of immediate interest makes something a business risk regardless of how it might turn out over time. Still, just 2 cents towards the long term: >Regarding PoE, we have made a survey some time ago and less than 5% of the users were interested in PoE 1. I'm not sure surveys are that useful for features a lot of users aren't aware of or might have outdated views on. I think a better survey would be on whether users wanted ethernet at all, because that's the only real differentiator there in an age where a basic PoE+ switch can be had for $55. If it's already going to be on a hardline, then having it be powered that way too is ultra useful and zero extra work. Ethernet is also something people can do without being electricians. There is a bit of chicken/egg challenge with features like that where not many people know because there isn't much stuff. 2. I hope you're normalizing to some degree for purchase volume. 5% of customers isn't the same as 5% of sales. That said I certainly wouldn't want to see you face any challenges over something like that and your reasons are fair enough. It is just a bit of a bummer to not have more options on that front. But the native HA integration added back in June with no firmware flash already sold me on a bunch of AirGradients anyway and was much more important! Thank you so much for that.
    - ahaucnx 2y ago
      I am not ruling it out in the long term. I actually also would love to have a wired Ethernet connection and if we grow further we might very well come to the point where the 5% really matter and we have more resources available to develop it.
- sliken 2y ago
  Why not just use Airthings, don't use their service, and own your data. They say in the license if you use their service (i.e. you upload your data to them) they own it. But if you don't, you own it. Seems fair to give them their data if they are going to store it for you and provide you an app and website to view it. They publish a github repo to let you download direct from airthings (not using anything cloud) and graph it with graphana or whatever you want.
  - mbStavola 2y ago
    This isn't the case for their newer products afaict-- with the ViewPlus (which is what I have) you _must_ go through their cloud offering in order to get your data. I do not want to roundtrip for something that shouldn't have left my house in the first place. Their older products allowed me to keep it local, why shouldn't their newer ones?
felixtany 2y ago
After spending a decent amount on Sensibo equipment and finding its accuracy is laughably bad, I did a heap of research into PurpleAir and the other sensors on the market. I already had a couple of Aranet4 devices and wanted the same high level of accuracy they provided - and so it was really down to PurpleAir or AirGradient given the SenseAir and Planter sensors. I'd say clinched my decision - and I dropped quite a bit of money on 2 outdoors and 4 indoors, split between me and a friend. Why didn't I do with PurpleAir? - The order above with AirGradient was about USD$800 (for kit form devices, excluding freight). PurpleAir for the same models is USD$1774. - PurpleAir seemed to require a Google login to put the devices on a map, and I don't like the big-vendor-lock-in. - Browsing the AirGradient forums, Achim (the founder) is really involved, and the open-source nature of the platform appealed. For a (what appears to me to be, anyway!) small organisation, the quality and deliverable of the AirGradient system is exceptional. The equipment looks professional, joining it to the AirGradient dashboard is surprisingly easy, and the dashboard itself is really slick. It's fast, it works as direct icon on my iPhone, and does it's job (giving me key info) really well. In saying all that, I'd better clarify I'm getting nothing out of this glowing review! I just love it when tech works well, as it should, and when it does it should be recognised and supported.
sxp 2y ago
What do the two ownerships clauses (quoted below) mean in practice? It's unlikely AirThings will come after me if I download all the data from my sensors and post them online. And is there any evidence that they've gone after people who have created open source interfaces to their APIs? It sounds like their lawyers just wrote aggressive clauses into their contracts to cover their asses in case they are acquired or want to utilize the data in other ways. > In 15.4. of Airthings T&C it writes: “We own and shall retain ownership of all rights to all data and information collected via the Services provided to you…" > Furthermore, in 15.2 Airthings claims all rights for modifications that you might carry out on the Airthings monitor: “You hereby assign to Airthings all right, title, and interest (including Intellectual Property Rights) that you may have in any custom developments, modifications, or derivative works of the Services and Products created or developed by or for you, including but not limited to design, artwork, technology, software, data, functionality, and documentation."
- ahaucnx 2y ago
  Achim from AirGradient here. You raise an excellent point. Often T&C are indeed just written by lawyers and potentially not being enforced at all. However, it really does restrict what you can do with the monitors in practical ways. Let's say you want to build a business around using AirThings monitors with your own dashboard analysing the data and giving value added services. If you don't officially own the data, are you actually allowed to use it and monetize it for your own purposes? With these T&Cs and if you do this (and I actually know a few companies that do exactly that) you open a legal liability that AirThings could come after you.
- sliken 2y ago
  If you don't want airthings to own your data, do not upload it to them. Airthings has a git repo allowing you to read your own data, keep it inside your network, and graph it with graphana or anything you want. However if you use their free, er, no charge service to view your data, then they own what they upload. If you want to own your data, buy the airthings, don't use their service, and do anything you want with your data.
montjoy 2y ago
I have both the Airthings Wave+ and the AirGradient Pro. I like them both. The Wave+ can connect to Home Assistant just fine with Bluetooth so there’s no worry about “owning” the data etc. I didn’t care for the initial software that came with the AirGradient but it was easy enough to flash once I understood how ESPHome worked.
- ahaucnx 2y ago
  With our latest firmware we now natively support Home Assistant and the monitors are auto discovered. So no need to flash ESPHome anymore. We also expose a local API that makes it very easy to make GET requests to the monitor within your local network and basically gives you all possibilities for easy integration. [1]https://www.airgradient.com/home-assistant/ https://www.airgradient.com/home-assistant/ [2]https://github.com/airgradienthq/arduino/blob/master/docs/local-server.md https://github.com/airgradienthq/arduino/blob/master/docs/lo...
chomp 2y ago
I just got a pi zero w and a adafruit spg30. Not perfect, but good enough, I own the data, and I send it to grafana for alerting.
- oloapiu 2y ago
  Yeah all these consumer-grade air quality sensors are nothing more than a Sensirion SPS30 or a Plantower PMS5003 and a Wi-Fi module in a box. To get more than just that you need to look at professional-grade indicative AQ sensors such as https://clarity.io/ https://clarity.io/ and https://www.aeroqual.com/ https://www.aeroqual.com/ These are what government agencies and municipalities use for dense sensor networks. E.g. https://www.breathelondon.org/ https://www.breathelondon.org/
  - ahaucnx 2y ago
    The clarity also uses the Plantower sensor. A high price does not necessarily mean better sensor modules.
ziml77 2y ago
I just got my AirGradient Ones a couple weeks ago. It was quite nice that I was able to set them up local-only with absolutely no fuss. Works wonderfully with Home Assistant. Also it was definitely worth saving money going with the DIY version. All that they leave for you is final assembly: plugging in 3 modules and wrenching down 4 self-tapping screws.
- anotherhue 2y ago
  I had the same experience, and honestly was hoping for more work to do. 90 seconds to assemble and it was auto discovered by home assistant in even less time. That said, it's probably overkill for a device whose only 'real' purpose is to tell you when to open your window. Sensible people can get a cheap CO2 meter for $30 that will be accurate enough for that purpose.
  - ahaucnx 2y ago
    We used to have a DIY version that required soldering but the problem was that a number of people overestimated their soldering skills and couldn't get it done. Then obviously that is frustrating for them. So we discontinued it for now. I would love to bring back a more "advanced" version in the future.
    - ploxiln 2y ago
      I'm sad to hear that the DIY Basic is "discontinued for now", rather than just "out of stock". I built mine about a year ago and I'm quite happy with it. (I later got the "ONE indoor kit" for my parents, since it has a nicer case included.) But I understand if the customer support (and PR ...) were too difficult to deal with for this particular offering. It is rather open hardware... I notice now there are "gerbers" of the DIY basic PCB that you make available, so I should be able to order PCBs from PCBWay or JLC-PCB, and the other sensors and parts directly from you or from AliExpress. Though if not for that DIY Basic kit you offered before, I'd consider the project a bit risky for my level of design/part-sourcing. So, thanks!
      - 2y ago
strogonoff 2y ago
I bought IQAir AirVisual Pro (indoor), because California’s AQMD[0] tested it as fairly accurate (and, let’s be honest, because I have been relying on their app). It cost more than $400, and it lasted less than half a year. The unit is made of flimsy off-white plastic, has an insanely bright blue-white display that cannot be dimmed enough (not fit for the bedroom, at all), slow menu with useless options, and (in 2024!) that weird micro USB connector. That connector is what broke after four months. Turns out, precision is not everything. [0] Apparently, California government has a lab that tests various consumer air quality monitors and publishes results (http://www.aqmd.gov/aq-spec/evaluations/criteria-pollutants http://www.aqmd.gov/aq-spec/evaluations/criteria-pollutants). Despite having dozens of evaluations, they do not seem to have tested AirGradient or Airthings or their respective sensors. I wonder if they take requests?
- Urgo 2y ago
  > It cost more than $400, and it lasted less than half a year. I have four of IQAir's indoor ones and one of their outdoor ones. I got the first one probably 8 or 9 years ago but the others maybe 3 or 4 years ago. The original one was made before iqair bought airvisual. They all are working fine currently. Also, for the indoor ones, you can set DND mode (I forget the exact name they use) and it'll turn off the display during the night. Does have one downside I'll cover in a sec though. That said, until this year I always just used their website to view the data or the app. It worked.. ok. But their graphs were tiny and not very easy to use. So this year I started digging in deeper and set tried to connect things to grafana. The indoor units have a samba share where you can pull down data, but the issue is they only update that data every 5-15 minutes (15 when its in DND mode). The outdoor unit does NOT have a samba share. You need to use their API for that. Now this is where I'm really unhappy and eventually looking at AirGradient or some other option. In order to get api access to my data on the outdoor unit I either need to pay (a lot, I forget how much) for api access, or I can get free api access if I allow iqair to sell my data to everyone else. .. not interested in that So I'm currently only getting data from my indoor units and only getting every ~5-15 min data points.. but they are working. I did invest a lot in these devices so not ready to upgrade to anything different just yet, but every time I see one of these air quality topics pop up here on HN it really makes me want to change.
gjs278 2y ago
[dead]
nov21b 2y ago
I have the Airthings Wave+ and one thing that bugs me is the relative humidity threshold. Anything above 60% will give a yellow led warning. If you have many indoor plants, live in a forest, or even just ventilate a lot on rainy days the sensor will show an air quality warning. I would like to take humidity out of the equation as I much rather focus on CO2, VOC and Radon. Otherwise a great sensor that was easy to integrate in my own scripts as you can easily get all sensor readings over bluetooth.
daft_pink 2y ago
Why no radon on the airgradient? I’d really like a device that also prevents cancer.
- stephenitis 2y ago
  I agree, I'd like to go with air gradient but i need a radon sensor
  - madspindel 2y ago
    https://aranet.com/en/home/products/aranet-radon-sensor https://aranet.com/en/home/products/aranet-radon-sensor
    - daft_pink 2y ago
      I just want to point out that the other device being compared actually includes a radon sensor and the cost of that device would be cheaper than the airgradient plus the radon sensor.
  - anotherhue 2y ago
    You can get a cheap analogue radon sensor. As others have pointed out, even if you do detect radon the typical solution is add ventilation. Which is exactly what you do if you had a high CO2 reading.
    - daft_pink 2y ago
      Do you have any links to this? I’m very curious.
      - anotherhue 2y ago
        Just lookup radon test kit and how to deal with radon. https://kagi.com/search?q=radon+test+kit+&r=us&sh=fA8r72RAplql06lpaDqDbA https://kagi.com/search?q=radon+test+kit+&r=us&sh=fA8r72RApl...
- 2y ago
eisa01 2y ago
The batteries in the AirThings View Plus are nice, as you can bring it with you on vacation. There’s quite some variety in indoor air quality!
bhouston 2y ago
I bought this no-name CO2 monitor (can be found on Amazon and AliExpress and probably elsewhere): https://www.aliexpress.com/item/1005006483766478.html https://www.aliexpress.com/item/1005006483766478.html It is ~ $50. It actually works really well. I tested it in a number of situations and it appeared to be relatively accurate. It led me to make some ventilation changes in the house. I didn't need it on all the time, I just do spot checks if I think there is an issue now. I like the portability as well.
- ahaucnx 2y ago
  I had a look but it's unclear that it is an NDIR CO2 sensor. There are cheap Chinese CO2 sensors that actually do not measure CO2 but estimate it from VOCs. You can test this easily. Spray some Ethanol around your sensor and see if the CO2 rises a lot. If so then it's not a real CO2 sensor.
  - bhouston 2y ago
    I think it is a VOC-based estimator. Seems to work well though in most cases.
lrhegeba 2y ago
Am very satisified with https://en.air-q.com/funktionen/air-q-science-option https://en.air-q.com/funktionen/air-q-science-option that offers a lot of sensors (https://en.air-q.com/messwerte https://en.air-q.com/messwerte). Good UI, API-accessible and integration in HA works just fine. Rather pricey though, depending how many sensors you choose.
antirez 2y ago
The Awair Element works very well in my experience. If you check the sensors list, the sum of the cost of just the sensors (that are very high quality ones) will match the total cost of the device. And the software and the design are great as well.
emmanuel_1234 2y ago
I unplugged my AirGradient a couple days ago. It's quite the useless piece. The CO2 sensor does not read CO2 levels, and recalibrates automagically. I have completely wacky readings from it, from 200ppm to 2000ppm. The VOC sensor also apparently does not read VOC levels, see discussion here: https://forum.airgradient.com/t/measurement-values-for-the-airgradient-one-tvoc-readings/1027/12 https://forum.airgradient.com/t/measurement-values-for-the-a.... All in all, I'm frustrated I fell for the regular free advertising they get on HN.
- ahaucnx 2y ago
  Achim from AirGradient here. I'm often personally going on Zoom call with customers to make sure they get 100% out of the monitor and address these types of questions. Please send me a note through our support form and I'm happy to help [1]. Please make a note in the support ticket to this link so that it will get assigned right to me. Now regarding the CO2 sensor. We use the SenseAir S8 which is one of the best NDIR sensors out there. If you do not like the auto calibration, you can now switch this off in the dashboard or change the automatic baseline calibration to longer periods. To do this, go to Place Settings, General Place Settings. In case you still have these wild swings, contact our support with your sensor ID and we will have a look. Regarding VOC, this has also recently addressed and you can now change the learning gain offset to make it more behave like an absolute sensor. We clearly describe the behavior of the VOC sensor on our website and this is actually the behavior of all newer generations of VOC sensors. We use the Sensirion SGP41 which is regarded one of the best ones. Now, you are free to call it a "useless piece" but I'd appreciate if we keep the discussion fact based. As far as I know, there is no other air quality monitor in the same price range that is substantially better than ours. Measuring air quality pollutants is not as simple as measuring temperature so there are inherent shortcoming in some of them. It is part of our mission to educate people on these. This is why we published for example the air quality cheatsheet. [2] [1] https://www.airgradient.com/support/ https://www.airgradient.com/support/ [2] https://www.airgradient.com/documents/infographics/AQ-Monitor-Cheatsheet.pdf https://www.airgradient.com/documents/infographics/AQ-Monito...
- rssoconnor 2y ago
  I bought a pair of sensors based on the HN mentions, and so far I'm pretty happy. I was mainly interested in their PM sensor, which isn't on your list of complaints, and works quite well. I discovered my rangehood, which doesn't have an outdoor exhaust, is even more useless than I had imagined. I bought a HEPA filter for my kitchen to run while I'm cooking (a Blueair based on other HN comments) and based on the PM sensor readings of the AirGradient the HEPA filter is quite effective. I did have to configure the CO₂ sensor recalibration period to keep the numbers sensible. It wasn't so easy to set different recalibration periods for the indoor and outdoor sensors, but with some curl commands, I was able to get things configured to my liking. I do appreciate that, in principle, I can edit the firmware to my liking in the future.
haswell 2y ago
I appreciate that AirGradient has open source products, but the company repeatedly posting its own content here is starting to feel increasingly spammy. Air quality is a hot topic here so the posts often succeed, but why does this product hold so much sway with this community? Genuine question. Most companies self-promoting their own “we’re better than X competitor” content are not so well received. Am I missing some context/history, or are people just really happy with their AirGradient gear?
- ahaucnx 2y ago
  Achim Founder of AirGradient here. Yes, I'm curious about this too. Could you clarify what exactly in this post you think is spammy? We do try to write interesting and informative blog posts and also highlight important aspects that are not that generally known. Like in this article the data ownership issue of the AirThings. In fact as part of our open-source philosophy we also see our responsibility creating awareness and informing about these things. Why shouldn't we then try and distribute these posts to for example hacker news? The posts only get traction if people like the content and upvote it. What's wrong with that?
  - haswell 2y ago
    > Could you clarify what exactly in this post you think is spammy? In just the last 12 months, you’ve submitted your own domain 26 times. When you’re not submitting your own domain, you’re almost universally submitting content about your product. Self promotion is directly addressed in the site guidelines. > Please don't use HN primarily for promotion. It's ok to post your own stuff part of the time, but the primary use of the site should be for curiosity. While I think some of the content is actually good, my reaction is to the fact that it has increasingly felt like pure self promotion, and the data backs that up. > The posts only get traction if people like the content and upvote it. What's wrong with that? See above. But for me, I’m just sharing how I feel after seeing these posts repeatedly. I’m tired of them to a degree that I felt compelled to comment about guidelines, which is something I generally try to avoid. If it was an organically hot topic getting submitted by dozens of different people, I’d accept it as the current buzz in the zeitgeist and move on. Because it’s all coming from one account, it feels engineered, and yes, spammy. The quality of your content isn’t enough to excuse the behavior, and the behavior is now one of the lenses through which I’m seeing your product. Too much of a good thing perhaps.
ck2 2y ago
Airgradient teardowns and reports are like the Backblaze reports, always such a great service to the community. But I really wish Airgradient would get on the national US map for AQI PurpleAir really has a massive headstart and Google even puts Purple on googlemaps so you can't compete with that. I keep saying AirGradient needs to massively discount if not just give for free their monitors to all the WeatherSTEM sites in the USA which ALL do NOT have air-quality monitoring. Now -THAT- would get them on the map. compare https://map.purpleair.com/ https://map.purpleair.com/ https://www.airgradient.com/map/?zoom=4 https://www.airgradient.com/map/?zoom=4 https://www.weatherstem.com/sites https://www.weatherstem.com/sites
Xen9 2y ago
I've recently realized that one can effectively cross-ventilate studio apartment by adding to their mail slots a PC-fan filtered by small HEPA-filter (to remover outdoor odors) combined with a window-attached ventilator pulling air to outdoors, possibly with a normal fan in the middle of the studio. Feel free to Kickstart this.

76 points by ahaucnx 2y ago

I plan to pick up some AirGradient units and phase out my AirThings devices simply because I want to keep all my data local and open. However, I do wish 1) it could monitor Radon and 2) had a PoE powered sku.

ahaucnx 2y ago
Yes, these things have come up quite a few times. Regarding Radon there are unfortunately no 3rd party sensor modules available that we know off (and are reasonably priced). If you know any, please let us know. Regarding PoE, we have made a survey some time ago and less than 5% of the users were interested in PoE. However, the hardware integration is not straight forward and it would increase the price of the unit for all customers. This is the main reason we did not do it yet. However our open hardware has an extension plug and this could be an excellent community project for somebody to develop this as an extension card and then share the design.
- xoa 2y ago
  So fully recognizing upfront my own bias towards this feature, and that lack of immediate interest makes something a business risk regardless of how it might turn out over time. Still, just 2 cents towards the long term: >Regarding PoE, we have made a survey some time ago and less than 5% of the users were interested in PoE 1. I'm not sure surveys are that useful for features a lot of users aren't aware of or might have outdated views on. I think a better survey would be on whether users wanted ethernet at all, because that's the only real differentiator there in an age where a basic PoE+ switch can be had for $55. If it's already going to be on a hardline, then having it be powered that way too is ultra useful and zero extra work. Ethernet is also something people can do without being electricians. There is a bit of chicken/egg challenge with features like that where not many people know because there isn't much stuff. 2. I hope you're normalizing to some degree for purchase volume. 5% of customers isn't the same as 5% of sales. That said I certainly wouldn't want to see you face any challenges over something like that and your reasons are fair enough. It is just a bit of a bummer to not have more options on that front. But the native HA integration added back in June with no firmware flash already sold me on a bunch of AirGradients anyway and was much more important! Thank you so much for that.
  - ahaucnx 2y ago
    I am not ruling it out in the long term. I actually also would love to have a wired Ethernet connection and if we grow further we might very well come to the point where the 5% really matter and we have more resources available to develop it.
sliken 2y ago
Why not just use Airthings, don't use their service, and own your data. They say in the license if you use their service (i.e. you upload your data to them) they own it. But if you don't, you own it. Seems fair to give them their data if they are going to store it for you and provide you an app and website to view it. They publish a github repo to let you download direct from airthings (not using anything cloud) and graph it with graphana or whatever you want.
- mbStavola 2y ago
  This isn't the case for their newer products afaict-- with the ViewPlus (which is what I have) you _must_ go through their cloud offering in order to get your data. I do not want to roundtrip for something that shouldn't have left my house in the first place. Their older products allowed me to keep it local, why shouldn't their newer ones?

felixtany 2y ago

After spending a decent amount on Sensibo equipment and finding its accuracy is laughably bad, I did a heap of research into PurpleAir and the other sensors on the market. I already had a couple of Aranet4 devices and wanted the same high level of accuracy they provided - and so it was really down to PurpleAir or AirGradient given the SenseAir and Planter sensors. I'd say clinched my decision - and I dropped quite a bit of money on 2 outdoors and 4 indoors, split between me and a friend. Why didn't I do with PurpleAir? - The order above with AirGradient was about USD$800 (for kit form devices, excluding freight). PurpleAir for the same models is USD$1774. - PurpleAir seemed to require a Google login to put the devices on a map, and I don't like the big-vendor-lock-in. - Browsing the AirGradient forums, Achim (the founder) is really involved, and the open-source nature of the platform appealed. For a (what appears to me to be, anyway!) small organisation, the quality and deliverable of the AirGradient system is exceptional. The equipment looks professional, joining it to the AirGradient dashboard is surprisingly easy, and the dashboard itself is really slick. It's fast, it works as direct icon on my iPhone, and does it's job (giving me key info) really well. In saying all that, I'd better clarify I'm getting nothing out of this glowing review! I just love it when tech works well, as it should, and when it does it should be recognised and supported.

sxp 2y ago

What do the two ownerships clauses (quoted below) mean in practice? It's unlikely AirThings will come after me if I download all the data from my sensors and post them online. And is there any evidence that they've gone after people who have created open source interfaces to their APIs? It sounds like their lawyers just wrote aggressive clauses into their contracts to cover their asses in case they are acquired or want to utilize the data in other ways. > In 15.4. of Airthings T&C it writes: “We own and shall retain ownership of all rights to all data and information collected via the Services provided to you…" > Furthermore, in 15.2 Airthings claims all rights for modifications that you might carry out on the Airthings monitor: “You hereby assign to Airthings all right, title, and interest (including Intellectual Property Rights) that you may have in any custom developments, modifications, or derivative works of the Services and Products created or developed by or for you, including but not limited to design, artwork, technology, software, data, functionality, and documentation."

ahaucnx 2y ago
Achim from AirGradient here. You raise an excellent point. Often T&C are indeed just written by lawyers and potentially not being enforced at all. However, it really does restrict what you can do with the monitors in practical ways. Let's say you want to build a business around using AirThings monitors with your own dashboard analysing the data and giving value added services. If you don't officially own the data, are you actually allowed to use it and monetize it for your own purposes? With these T&Cs and if you do this (and I actually know a few companies that do exactly that) you open a legal liability that AirThings could come after you.
sliken 2y ago
If you don't want airthings to own your data, do not upload it to them. Airthings has a git repo allowing you to read your own data, keep it inside your network, and graph it with graphana or anything you want. However if you use their free, er, no charge service to view your data, then they own what they upload. If you want to own your data, buy the airthings, don't use their service, and do anything you want with your data.

montjoy 2y ago

I have both the Airthings Wave+ and the AirGradient Pro. I like them both. The Wave+ can connect to Home Assistant just fine with Bluetooth so there’s no worry about “owning” the data etc. I didn’t care for the initial software that came with the AirGradient but it was easy enough to flash once I understood how ESPHome worked.

ahaucnx 2y ago
With our latest firmware we now natively support Home Assistant and the monitors are auto discovered. So no need to flash ESPHome anymore. We also expose a local API that makes it very easy to make GET requests to the monitor within your local network and basically gives you all possibilities for easy integration. [1]https://www.airgradient.com/home-assistant/ https://www.airgradient.com/home-assistant/ [2]https://github.com/airgradienthq/arduino/blob/master/docs/local-server.md https://github.com/airgradienthq/arduino/blob/master/docs/lo...

chomp 2y ago

I just got a pi zero w and a adafruit spg30. Not perfect, but good enough, I own the data, and I send it to grafana for alerting.

oloapiu 2y ago
Yeah all these consumer-grade air quality sensors are nothing more than a Sensirion SPS30 or a Plantower PMS5003 and a Wi-Fi module in a box. To get more than just that you need to look at professional-grade indicative AQ sensors such as https://clarity.io/ https://clarity.io/ and https://www.aeroqual.com/ https://www.aeroqual.com/ These are what government agencies and municipalities use for dense sensor networks. E.g. https://www.breathelondon.org/ https://www.breathelondon.org/
- ahaucnx 2y ago
  The clarity also uses the Plantower sensor. A high price does not necessarily mean better sensor modules.

ziml77 2y ago

I just got my AirGradient Ones a couple weeks ago. It was quite nice that I was able to set them up local-only with absolutely no fuss. Works wonderfully with Home Assistant. Also it was definitely worth saving money going with the DIY version. All that they leave for you is final assembly: plugging in 3 modules and wrenching down 4 self-tapping screws.

anotherhue 2y ago
I had the same experience, and honestly was hoping for more work to do. 90 seconds to assemble and it was auto discovered by home assistant in even less time. That said, it's probably overkill for a device whose only 'real' purpose is to tell you when to open your window. Sensible people can get a cheap CO2 meter for $30 that will be accurate enough for that purpose.
- ahaucnx 2y ago
  We used to have a DIY version that required soldering but the problem was that a number of people overestimated their soldering skills and couldn't get it done. Then obviously that is frustrating for them. So we discontinued it for now. I would love to bring back a more "advanced" version in the future.
  - ploxiln 2y ago
    I'm sad to hear that the DIY Basic is "discontinued for now", rather than just "out of stock". I built mine about a year ago and I'm quite happy with it. (I later got the "ONE indoor kit" for my parents, since it has a nicer case included.) But I understand if the customer support (and PR ...) were too difficult to deal with for this particular offering. It is rather open hardware... I notice now there are "gerbers" of the DIY basic PCB that you make available, so I should be able to order PCBs from PCBWay or JLC-PCB, and the other sensors and parts directly from you or from AliExpress. Though if not for that DIY Basic kit you offered before, I'd consider the project a bit risky for my level of design/part-sourcing. So, thanks!
    - 2y ago

strogonoff 2y ago

I bought IQAir AirVisual Pro (indoor), because California’s AQMD[0] tested it as fairly accurate (and, let’s be honest, because I have been relying on their app). It cost more than $400, and it lasted less than half a year. The unit is made of flimsy off-white plastic, has an insanely bright blue-white display that cannot be dimmed enough (not fit for the bedroom, at all), slow menu with useless options, and (in 2024!) that weird micro USB connector. That connector is what broke after four months. Turns out, precision is not everything. [0] Apparently, California government has a lab that tests various consumer air quality monitors and publishes results (http://www.aqmd.gov/aq-spec/evaluations/criteria-pollutants http://www.aqmd.gov/aq-spec/evaluations/criteria-pollutants). Despite having dozens of evaluations, they do not seem to have tested AirGradient or Airthings or their respective sensors. I wonder if they take requests?

Urgo 2y ago
> It cost more than $400, and it lasted less than half a year. I have four of IQAir's indoor ones and one of their outdoor ones. I got the first one probably 8 or 9 years ago but the others maybe 3 or 4 years ago. The original one was made before iqair bought airvisual. They all are working fine currently. Also, for the indoor ones, you can set DND mode (I forget the exact name they use) and it'll turn off the display during the night. Does have one downside I'll cover in a sec though. That said, until this year I always just used their website to view the data or the app. It worked.. ok. But their graphs were tiny and not very easy to use. So this year I started digging in deeper and set tried to connect things to grafana. The indoor units have a samba share where you can pull down data, but the issue is they only update that data every 5-15 minutes (15 when its in DND mode). The outdoor unit does NOT have a samba share. You need to use their API for that. Now this is where I'm really unhappy and eventually looking at AirGradient or some other option. In order to get api access to my data on the outdoor unit I either need to pay (a lot, I forget how much) for api access, or I can get free api access if I allow iqair to sell my data to everyone else. .. not interested in that So I'm currently only getting data from my indoor units and only getting every ~5-15 min data points.. but they are working. I did invest a lot in these devices so not ready to upgrade to anything different just yet, but every time I see one of these air quality topics pop up here on HN it really makes me want to change.

gjs278 2y ago

[dead]

nov21b 2y ago

I have the Airthings Wave+ and one thing that bugs me is the relative humidity threshold. Anything above 60% will give a yellow led warning. If you have many indoor plants, live in a forest, or even just ventilate a lot on rainy days the sensor will show an air quality warning. I would like to take humidity out of the equation as I much rather focus on CO2, VOC and Radon. Otherwise a great sensor that was easy to integrate in my own scripts as you can easily get all sensor readings over bluetooth.

daft_pink 2y ago

Why no radon on the airgradient? I’d really like a device that also prevents cancer.

stephenitis 2y ago
I agree, I'd like to go with air gradient but i need a radon sensor
- madspindel 2y ago
  https://aranet.com/en/home/products/aranet-radon-sensor https://aranet.com/en/home/products/aranet-radon-sensor
  - daft_pink 2y ago
    I just want to point out that the other device being compared actually includes a radon sensor and the cost of that device would be cheaper than the airgradient plus the radon sensor.
- anotherhue 2y ago
  You can get a cheap analogue radon sensor. As others have pointed out, even if you do detect radon the typical solution is add ventilation. Which is exactly what you do if you had a high CO2 reading.
  - daft_pink 2y ago
    Do you have any links to this? I’m very curious.
    - anotherhue 2y ago
      Just lookup radon test kit and how to deal with radon. https://kagi.com/search?q=radon+test+kit+&r=us&sh=fA8r72RAplql06lpaDqDbA https://kagi.com/search?q=radon+test+kit+&r=us&sh=fA8r72RApl...
2y ago

eisa01 2y ago

The batteries in the AirThings View Plus are nice, as you can bring it with you on vacation. There’s quite some variety in indoor air quality!

bhouston 2y ago

I bought this no-name CO2 monitor (can be found on Amazon and AliExpress and probably elsewhere): https://www.aliexpress.com/item/1005006483766478.html https://www.aliexpress.com/item/1005006483766478.html It is ~ $50. It actually works really well. I tested it in a number of situations and it appeared to be relatively accurate. It led me to make some ventilation changes in the house. I didn't need it on all the time, I just do spot checks if I think there is an issue now. I like the portability as well.

ahaucnx 2y ago
I had a look but it's unclear that it is an NDIR CO2 sensor. There are cheap Chinese CO2 sensors that actually do not measure CO2 but estimate it from VOCs. You can test this easily. Spray some Ethanol around your sensor and see if the CO2 rises a lot. If so then it's not a real CO2 sensor.
- bhouston 2y ago
  I think it is a VOC-based estimator. Seems to work well though in most cases.

lrhegeba 2y ago

Am very satisified with https://en.air-q.com/funktionen/air-q-science-option https://en.air-q.com/funktionen/air-q-science-option that offers a lot of sensors (https://en.air-q.com/messwerte https://en.air-q.com/messwerte). Good UI, API-accessible and integration in HA works just fine. Rather pricey though, depending how many sensors you choose.

antirez 2y ago

The Awair Element works very well in my experience. If you check the sensors list, the sum of the cost of just the sensors (that are very high quality ones) will match the total cost of the device. And the software and the design are great as well.

emmanuel_1234 2y ago

I unplugged my AirGradient a couple days ago. It's quite the useless piece. The CO2 sensor does not read CO2 levels, and recalibrates automagically. I have completely wacky readings from it, from 200ppm to 2000ppm. The VOC sensor also apparently does not read VOC levels, see discussion here: https://forum.airgradient.com/t/measurement-values-for-the-airgradient-one-tvoc-readings/1027/12 https://forum.airgradient.com/t/measurement-values-for-the-a.... All in all, I'm frustrated I fell for the regular free advertising they get on HN.

ahaucnx 2y ago
Achim from AirGradient here. I'm often personally going on Zoom call with customers to make sure they get 100% out of the monitor and address these types of questions. Please send me a note through our support form and I'm happy to help [1]. Please make a note in the support ticket to this link so that it will get assigned right to me. Now regarding the CO2 sensor. We use the SenseAir S8 which is one of the best NDIR sensors out there. If you do not like the auto calibration, you can now switch this off in the dashboard or change the automatic baseline calibration to longer periods. To do this, go to Place Settings, General Place Settings. In case you still have these wild swings, contact our support with your sensor ID and we will have a look. Regarding VOC, this has also recently addressed and you can now change the learning gain offset to make it more behave like an absolute sensor. We clearly describe the behavior of the VOC sensor on our website and this is actually the behavior of all newer generations of VOC sensors. We use the Sensirion SGP41 which is regarded one of the best ones. Now, you are free to call it a "useless piece" but I'd appreciate if we keep the discussion fact based. As far as I know, there is no other air quality monitor in the same price range that is substantially better than ours. Measuring air quality pollutants is not as simple as measuring temperature so there are inherent shortcoming in some of them. It is part of our mission to educate people on these. This is why we published for example the air quality cheatsheet. [2] [1] https://www.airgradient.com/support/ https://www.airgradient.com/support/ [2] https://www.airgradient.com/documents/infographics/AQ-Monitor-Cheatsheet.pdf https://www.airgradient.com/documents/infographics/AQ-Monito...
rssoconnor 2y ago
I bought a pair of sensors based on the HN mentions, and so far I'm pretty happy. I was mainly interested in their PM sensor, which isn't on your list of complaints, and works quite well. I discovered my rangehood, which doesn't have an outdoor exhaust, is even more useless than I had imagined. I bought a HEPA filter for my kitchen to run while I'm cooking (a Blueair based on other HN comments) and based on the PM sensor readings of the AirGradient the HEPA filter is quite effective. I did have to configure the CO₂ sensor recalibration period to keep the numbers sensible. It wasn't so easy to set different recalibration periods for the indoor and outdoor sensors, but with some curl commands, I was able to get things configured to my liking. I do appreciate that, in principle, I can edit the firmware to my liking in the future.

haswell 2y ago

I appreciate that AirGradient has open source products, but the company repeatedly posting its own content here is starting to feel increasingly spammy. Air quality is a hot topic here so the posts often succeed, but why does this product hold so much sway with this community? Genuine question. Most companies self-promoting their own “we’re better than X competitor” content are not so well received. Am I missing some context/history, or are people just really happy with their AirGradient gear?

ahaucnx 2y ago
Achim Founder of AirGradient here. Yes, I'm curious about this too. Could you clarify what exactly in this post you think is spammy? We do try to write interesting and informative blog posts and also highlight important aspects that are not that generally known. Like in this article the data ownership issue of the AirThings. In fact as part of our open-source philosophy we also see our responsibility creating awareness and informing about these things. Why shouldn't we then try and distribute these posts to for example hacker news? The posts only get traction if people like the content and upvote it. What's wrong with that?
- haswell 2y ago
  > Could you clarify what exactly in this post you think is spammy? In just the last 12 months, you’ve submitted your own domain 26 times. When you’re not submitting your own domain, you’re almost universally submitting content about your product. Self promotion is directly addressed in the site guidelines. > Please don't use HN primarily for promotion. It's ok to post your own stuff part of the time, but the primary use of the site should be for curiosity. While I think some of the content is actually good, my reaction is to the fact that it has increasingly felt like pure self promotion, and the data backs that up. > The posts only get traction if people like the content and upvote it. What's wrong with that? See above. But for me, I’m just sharing how I feel after seeing these posts repeatedly. I’m tired of them to a degree that I felt compelled to comment about guidelines, which is something I generally try to avoid. If it was an organically hot topic getting submitted by dozens of different people, I’d accept it as the current buzz in the zeitgeist and move on. Because it’s all coming from one account, it feels engineered, and yes, spammy. The quality of your content isn’t enough to excuse the behavior, and the behavior is now one of the lenses through which I’m seeing your product. Too much of a good thing perhaps.

ck2 2y ago

Airgradient teardowns and reports are like the Backblaze reports, always such a great service to the community. But I really wish Airgradient would get on the national US map for AQI PurpleAir really has a massive headstart and Google even puts Purple on googlemaps so you can't compete with that. I keep saying AirGradient needs to massively discount if not just give for free their monitors to all the WeatherSTEM sites in the USA which ALL do NOT have air-quality monitoring. Now -THAT- would get them on the map. compare https://map.purpleair.com/ https://map.purpleair.com/ https://www.airgradient.com/map/?zoom=4 https://www.airgradient.com/map/?zoom=4 https://www.weatherstem.com/sites https://www.weatherstem.com/sites

Xen9 2y ago

I've recently realized that one can effectively cross-ventilate studio apartment by adding to their mail slots a PC-fan filtered by small HEPA-filter (to remover outdoor odors) combined with a window-attached ventilator pulling air to outdoors, possibly with a normal fan in the middle of the studio. Feel free to Kickstart this.