3 ms·
How are you measuring that? I've been scouring the web for low-idle-power builds and 3.5 watts is far below the best builds I've found (assuming that 3.5 watts
by craftkiller 2y ago
How are you measuring that? I've been scouring the web for low-idle-power builds and 3.5 watts is far below the best builds I've found (assuming that 3.5 watts is measured at-the-wall).
- Semaphor 2y agoThe futro S740, popular with selfhosters in Germany, gets similar wattage for people [0]. On a slightly older CPU (J4105). I can't measure values below 10W myself, but with 2 SSDs and 8GB RAM it never goes above that value, even under full load. [0] https://github.com/R3NE07/Futro-S740/blob/main/power_consumption.md https://github.com/R3NE07/Futro-S740/blob/main/power_consump...
- weweweoo 2y agoI've measured about 5w from the wall with Pentium J5005 based Dell thin client which has a tiny fan, one SSD, two RAM modules. No idea how N100 compares to J5005.
- geerlingguy 2y agoN100 runs slightly hotter, I've seen it more like 6-8W
- Asmod4n 2y agoJust a cheap measurement adapter you plug between the wall and cable. The nice thing about n100 Is its ability to disable the iGPU in the bios, saving you a little bit of power. But you have to reset the bios on the board to regain any output if you might need it later.