3 ms·
If you need detail in more than one axis, you should use a smaller nozzle and lower speed. Along z-axis, the feature size limit is layer height, and along XY it
by dotnet00 2y ago
If you need detail in more than one axis, you should use a smaller nozzle and lower speed. Along z-axis, the feature size limit is layer height, and along XY it's linewidth. Layer height can be very small with any nozzle (I've seen as small as 50 microns), but linewidth will typically need a smaller nozzle hole to work well, particularly to get below 100 microns.
- jyxent 2y agoI think XY actually has better resolution depending on your perspective. I agree that the minimum extrusion is approximately a line width circle. But that circle can move less than the line width for features on larger surfaces. For example, if you emboss something on the side of an object with 0.3mm depth using a 0.4mm nozzle / line-width, it will work fine.
- dotnet00 2y agoYeah, I suppose it depends heavily on the kind of detail. I was mostly thinking along the lines of printing lithophanes or hueforge prints. With lithophones it's typically recommended to print upright so the image is formed by stacking layers, as that allows for "pixels" to be thinner. Hueforge instead is typically printed flat because color stacking/blending needs more resolution than the shapes.
- krisoft 2y agoMy cheeky observation to that would be: if you need detail in any axis use a resin printer. ;)
- dotnet00 2y agoYeah, if you're doing detailed prints often, especially decorative stuff, resin can't be beat by standard fdm.