4 ms·
See the related "slow sand filter".[1] Slow sand filters are still a good water treatment method if you have enough space. [1] https://en.wikipedia.org/wiki/Sl
by Animats 2y ago
See the related "slow sand filter".[1] Slow sand filters are still a good water treatment method if you have enough space.
[1] https://en.wikipedia.org/wiki/Slow_sand_filter https://en.wikipedia.org/wiki/Slow_sand_filter
- walthamstow 2y agoI think these are what is used in London. The water treatment plant near me (Coppermill) has dozens of rectangular sand pits
- whartung 2y agoJust went through a local water treatment plant tour. Fundamentally, it’s pretty simple. This processing drinking water. The water comes in and the particulates within it carry a negative ion charge. The water passes over an agitator, and a combination of ferric chloride and some kind latex are mixed with the water. The water then flows through a long channel. At this point the negative charged particles bind with the positive charged chemicals. The combinations then simply precipitate out in the long channel. At the end, small channels draw water off just the first few inches of the larger channel. This water goes to a combination aggregate and sand filter. It’s not very deep, about 3 feet total for both. The resulting water is 99+% pure now. It moves on to a large activated carbon filter. We’re talking 10 feet deep. Like a water pitcher filter. This is a recent CA requirement, installed in 2005. Designed to remove some specific by products. The water then goes through a large UV system to kill what’s left, and is finally injected with some chlorine. The chlorine is preventative to deal with anything that may potentially be introduced later in the system. I don’t know when they intrythe UV part, but the way it’s laid out, seems like that came with the carbon filter system. That means that prior to 2005, the aggregate and sand filter was considered good enough, augmented with the chlorine. But they never considered the chlorine as part of the purifying process, simply precautionary. It was very interesting, and I thought pretty simple conceptually. The trick is the actual engineering of the actual plant and respective water system. I found it interesting to learn that the large water tank near me, which roughly measured at 5M gallons is actually only 1/3rd above ground. It’s a 16M tank, one of the largest in the system.
- aftbit 2y agoDoes the below ground part of the tank have pumps to supply water to the above ground part to get pressurization?
- whartung 2y agoAll of the water delivery is gravity fed. We live on the slope of an alluvial fan. Water is pumped as/if necessary to the various reservoirs, but from there they rely on water drop for delivery. The tank may well have two sets of pipes to service the closest homes, some closer to the surface with others buried deeper(assuming those homes are even serviced by that tank). But I’m less than a quarter mile away and well below the bottom of the tank. It’s steeper here than it looks. They say they can move water from anywhere to anywhere in the system through a combination of pumps and gravity, but all consumer delivery pressure is gravity based. The water pressure at someone’s house is based on their distance in height from their servicing reservoir. If they were to move water from the lowest part to the highest, it would take 8 lifts of the water. Electricity is a significant expense to the system so minimizing pumping, for any reason, is a priority for them. An interesting trivia bit is that, according to them, where our system has 8 lifts, the CA aqueduct has a total of 11 in its system.
- SoftTalker 2y ago> they never considered the chlorine as part of the purifying process, simply precautionary In many parts of the world they do not add chlorine. Our water tastes and smells like a swimming pool in comparison.
- bongodongobob 2y agoI've been all over the US and no where has it smelled or tasted remotely like chlorine. A quick Google says the high end is 4 ppm. If you think you can taste or smell that, you're lying to yourself.
- lagniappe 2y ago
- twic 2y agoIf I understand correctly, the way these work is that microorganisms create a biofilm, and then the biofilm filters the water. The pore size is incredibly small, so particulates and bacteria and so on are filtered out. In which case, I wonder if you could make a more space-efficient version by producing biofilms, or something similar, on an industrial scale. Whether in bioreactors optimised for film production, or just by making great sheets of agarose gel or something.