4 ms·
I don't think Chicago's extra strict fire code allows for timber 5-over-1 buildings. I don't recall ever seeing any under construction.
by xnx 2y ago
I don't think Chicago's extra strict fire code allows for timber 5-over-1 buildings. I don't recall ever seeing any under construction.
- jrochkind1 2y agoThat could very well be how they manage to still hae new construction that's all masonry... although as I think my second (all balcony) example above shows, you can certainly do a generic obviously-optimized unpleasant brick 3-to-5-over-1 too! Not sure if people would prefer them to timber-over-concrete ones still.
- brewdad 2y agoIt also helps that there is a lack of seismic activity to push codes away from masonry buildings and towards materials that will survive an earthquake. Much of the west can’t build masonry because those buildings fail when the ground moves.
- pantalaimon 2y agoIn Germany all new construction is reinforced concrete, I always assumed that’s because it’s cheaper than masonry, but might as well be due to the notoriously strict building codes. Timber is seen as the innovative, climate friendly alternative, but it’s still more expensive than concrete.
- novok 2y agoAll of this is also partly dependent on the region's availability of timber vs. other materials and if they are near fault lines. The eastern half of the USA, including Chicago, is no where near a fault line, so prioritizing less earthquake friendly materials that have other benefits is more practical. The same applies to most of Germany and there isn't any natural forest left to harvest timber from. West coast USA is an earthquake zone and has a large timber industry in the pacific north west. Not using timber or something else that is flexible is a relative hazard! Fault line map: https://www.arcgis.com/apps/mapviewer/index.html?layers=37a384d4c1ef4f56a33a40f291a634e9 https://www.arcgis.com/apps/mapviewer/index.html?layers=37a3...
- jordanb 2y agoBy reinforced concrete do you mean they build forms and pour the concrete into the forms, or do you mean tilt-up (pour slabs horizontally then lift them to vertical to form wall sections) or do you mean reinforced-CMU (build a CMU wall then put rebar and grout through the cores of the completed wall? Pouring into forms is by far the most expensive technique because those forms are costly to build and set up. In the US poured concrete is only used in simple or horizontal structures (like foundations) or where the cost of the formwork can be amortized over a lot of repeated structures, like the floors of a highrise.
- jordanb 2y agoChicago doesn't allow 5 over 1s. All those new 3-5 story buildings in Chicago are masonry (CMU) or steel frame curtain wall. I've watched some of them get built. Building out of CMU is cost effective and they can be combined with brick for facades (brick-and-block). This should put to lie the idea that 5 over 1s are the only way cost-effective way to build. CMU construction is cheap it's just not quite as cheap as timber frame, and developers will always choose the cheapest technique they're allowed to use.
- lotsofpulp 2y agoLandowners know how much construction costs, so land prices are probably lower in Chicago as opposed to elsewhere. If you have multiple developers bidding for the same (in demand) land, then the one willing to pay the most will obviously have to choose to reduce construction costs wherever possible to afford.
- Kon-Peki 2y agoLand prices in Chicago are definitely cheaper than other large cities. But at the same time, the fire code and zoning make it pretty rare that a 6-floor building is the right economic choice. You might as well build it to be 10-15 floors. The approval process isn’t going to be more difficult or time consuming, your per-unit costs will be lower, and there’s no shortage of banks willing to finance it. This is also quite different than most other large cities.
- jrochkind1 2y agoInteresting. Really, the more I think about it, the more I'm dissapointed in the OP. Yes, I totally agree with OP that mid-rise 2-4 stories of residential over ground level of retail is a great livable urban design, and it would be a huge mistake to do anything to discourage or prevent this. The question is -- what are the constraints on what that looks like, what is it exactly that people are saying they don't like about "5 over 1", let's compare to various historical ways of building several stories of residentail over a ground floor of retail, let's look at what the cost factors and constraints are here, let's compare different cities, let's think about what sort of building codes might lead to different designs, etc. I want that article! (To be fair, plenty of new construction in Chicago is pretty bad too. I think that second picture I posted above of residential-over-retail is a pretty ugly and street-unfriendly building, although it gives everyone a front-facing balcony that presumably raised the value of those presumably condos. looks like a parking garage. https://www.google.com/maps/@41.962424,-87.6661565,3a,75y,262.19h,119.09t/data=!3m6!1e1!3m4!1sv6TOZ5H83BO2hiA_L4BBSA!2e0!7i16384!8i8192?coh=205409&entry=ttu https://www.google.com/maps/@41.962424,-87.6661565,3a,75y,26... )
- quickthrowman 2y agoChicago building code is wild. NM cable (Romex) is not permitted anywhere in Chicago, EMT and wire is used for residences. Armored cable is allowed in some circumstances.
- xnx 2y agoPex pipe was also forbidden. I think it might now be allowed in limited circumstances.
- quickthrowman 2y agoInteresting. I’ve always heard that labor unions were behind some of these regulations, wanting to protect their market from non-union competition. Requiring EMT and copper water supply lines both fit this scenario, as it’s harder to bend EMT and pull wire than it is to install NM cable; and it’s harder to bend and sweat copper pipe than it is to squeeze together the handles of a PEX fitting crimper. Anyone have some insight into the reasoning behind these weird Chicago building codes?