6 ms·
Unlocking the Duron and Athlon using the pencil (2007)
- jauntywundrkind 2y agoThere were similar techniques to mod cores to work on multi-processor systems! Helped a number of friends with that one!
- krylon 2y agoMy first multiprocessor system was one of those! Two Duron CPUs, "upgraded" to think they were AthlonMPs. Worked pretty well, but it used a lot of power. I burned through two PSUs in 18 months (admittedly, both were not exactly top-shelf).
- renatovico 2y agoI had this too but with athlon xp dual core a real like pro :) one time my psy burned some pins in motherboard I see the atx spec and found that is the power signal only well I replaced the psu with a proper watts and made used a clip to fill the gap of the burned side of the motherboard and this running’s well for 2y after a finnaly upgraded to core 2 duo generation
- Twirrim 2y ago2007! I forgot about the pencil trick, but never had a relevant generation of AMD chip to do that to.
- dainiusse 2y agoI did that with duron 600->900mhz, but it was so long ago that I don't remember exact date
- timschmidt 2y agoMy Duron 600 ran Windows 98 SE at 950mhz, on an Abit motherboard. What ever happened to Abit? Miss those mad geniuses.
- teruakohatu 2y agoThey had financial problems and a class action lawsuit against them in early 2000s. The company was sold and then eventually shutdown or folded into the parent.
- spockz 2y agoThose were the times. Unlocking a lot more performance just by tweaking. These days everything is locked down. I suppose this is more efficient. The last time in felt the same awe, although not by my own handiwork, was when I moved to an M1 MacBook and when I installed Fedora on my desktop. Everything was so fast and silent. Really amazing.
- timschmidt 2y agoI feel like a lot of the tweaking features popularized by Abit are now available on any "gamer" board from one of the major manufacturers, Intel and AMD now even make chipsets targeted at that segment, and there are a lot more bins for CPUs these days, most of which come "pre-overclocked" even dynamically so with turbo-boost and the like. The Athlons and Durons of this era had exposed dies, just a few SKUs, no built-in thermal throttling or speed boosting at all, and oversized high-cfm heatsinks and fans felt like a new thing.
- Panzer04 2y agoMore like these days everything is already clocked hard by default. There's basically no point overclocking modern unlocked chips, they are already clocked to 90% of their max speed. Compare that to the above example with 600 vs 900 Mhz (50%! faster) Some locked chips are clocked pretty slow, but that's normal segmentation :(
- jtwaleson 2y agoWhat made them mad geniuses? I saw their equipment from time to time in catalogs but was too young to realize they had some kind of special reputation.
- xorl 2y agoSame! Dad and I did this a few times, got around having to upgrade to get more performance when we could still get much more out of the current system.
- sedatk 2y agoI had tried that with Duron 600 but couldn’t overclock it. I don’t remember what went wrong. Maybe the motherboard didn’t support it.
- AnotherGoodName 2y agoThe best way to overclock the lower clocked durons was simply to change the fsb in the bios settings. You didn’t really need the pencil trick as they had 100mhz fsbs in an era where 133 was more common.
- sedatk 2y agoI remember doing that on my Athlon XP. Had too much issue with cooling though. (Probably my fault)
- AnotherGoodName 2y agoSure you didn’t just flip the 100->133mhz fsb setting in the motherboard? The low end durons didn’t really need the multiplier changed as they had a 100mhz fsb when the athlon 1000 had a 133mhz fsb and used the same motherboards. You could just flip the bios setting and get that exact stated overlock without the pencil trick.
- elric 2y agoI did the overclocking and overvolting thing (with a pencil) for a bit, but then I became obsessed with silent computers and went the other way: undervolting. Trying to keep it running at the lowest possible voltage without reducing the clock speed too much. Those were fun experiments. Could do passive air cooling when the overclockers were getting into water cooling. Aside from undervolting to reduce cooling needs and thus fan noise, suspending disks on sturby rubber bands greatly reduced vibration noises, same with mounting fans with plastic plugs instead of metal screws. Getting bigger, slower fans also helped a lot. PCs now tend to be pretty quiet these days, but loud fans and rattling still bug me from time to time.
- Daneel_ 2y agoI split the difference. I went with an overkill watercooling set up with quietness in mind, just so I could have nearly-passive cooling at high clock speeds. I’m currently using 2x 360x360mm radiators stacked together, with 4x 180mm 300rpm fans. It’s virtually silent yet keeps my CPU and GPU quite cool, even when gaming.
- Aeolos 2y agoWord for word the same here. I remember spending hours and hours in the silentpcreview forums looking for the latest and greatest in silent fan technology.
- kristopolous 2y agoI've probably still got one I should throw away. Probably more than one...
- userbinator 2y agoThe other related article which was here recently may have been related to this one showing up: https://news.ycombinator.com/item?id=40533761 https://news.ycombinator.com/item?id=40533761
- coobird 2y agoIIRC, the Athlon XP processors also had these contacts, but it required an additional step to fill a gap dug between the contacts with super glue. (Probably possible because previous processors used a ceramic package while the newer ones used organic plastic.)
- dangero 2y agoI thought mechanical pencils used graphite not lead
- new299 2y agoNo pencils use “lead”. It’s just called lead because the original material used looks similar to lead ore. See manufacturing section here: https://en.m.wikipedia.org/wiki/Pencil https://en.m.wikipedia.org/wiki/Pencil
- bdcravens 2y agoThe words we use are funny. I had a conversation with my wife yesterday explaining to her that "gas" (gasoline) wasn't a gas. (it can become one, but that's not where the name comes from)
- lukan 2y agoAnd if you push the gas pedal, it does not mean more gasoline comes in, but more air (which then makes more gasoline comes in). And people fear, that soon too many of the undividable atoms will be divided.
- bdcravens 2y agoI was watching a YouTube video the other day that called the accelerator the "gas pedal" - which makes sense, except it was a video about an EV. I wonder if that term will one day become disconnected from the original meaning, like "hang up" or the floppy save icon.
- lukan 2y agoAt least in german I saw EV cars described having a "strom pedal" (electricity/power pedal). More correct I guess, but also a bit odd. We will see, whether it will stick.
- smcl 2y agoHaha amazing, I did this on my Duron 700 MHz which I overclocked to 900 MHz, and my Athlon 1GHz (AXIA core IYKYK) to 1.4 GHz
- jtwaleson 2y agoWow, those codes bring back memories. I remember trying to find the exact right type numbers on online forums, to find the ones that could be overclocked the most. Never mind that I was about 13 and didn’t have the money to buy one but I could dream ;)
- smcl 2y agoYeah I was only a couple of years older than you and barely had the money, hence the overclocking :D Tbh it was fun even to be on a forum talking about it and checking benchmarks etc, some guys had very cool watercooling setups that I was very envious of
- RamRodification 2y agoHere's a nice relaxing video that I like, of a guy soldering the pins instead, which is a lot of work but more reliable: https://youtu.be/Lkuf9hckV08 https://youtu.be/Lkuf9hckV08
- theginger 2y ago> The only drawback to this is that the potential for customers to be ripped of by untrustworthy dealers selling overclocked CPUs to the public at the price of the actual CPU speed is increased by a large margin. Intel long ago locked the multiplier of their CPUs to keep such things from happening with their processors Is the author being charitable or do people really believe this was to protect consumers rather than constrain them?
- deaddodo 2y agoThe constraint was real, sure. But also, making lower binned/spec'd chips act like faster ones and then selling them for the same price, that was also something that happened. If someone paid $500, they should get the $500 chip, not a $220 made to work like the $500 one. So both things can be true.
- nebulous1 2y agoLying about the chip (ie saying that it's a $500 intel chip when it's actually an overclocked $200 chip), is clearly unethical. That said the realities of chip binning make this weird, as you could also argue that it's unethical and wasteful to artificially lock down some hardware's potential. It's not only chips that suffer from this, like when BMW tried to apply a monthly subscriptions for using the heated seats that came with your car.
- dagmx 2y agosaying that chip binning is unethical assumes the binning is truly for purely artificial reasons. What if the binning is genuinely because hardware is failing the required QC? Wouldn’t it be ethical to sell a unit that isn’t at risk of breaking/corrupting data etc and reusing the same units that have already been made? Binning is a pragmatic approach to reducing waste while providing products at different price points.
- deaddodo 2y agoOr you can think of it in the opposite manner, they could just sell all of the $500 spec'd chips as $500 chips and miss out on an entire market of people that could use a lower spec'd chip at $200. But that's besides the point. If I'm buying a $500 chip, I want that chip. The one that passed, qualified and is guaranteed at that speed by the manufacturer. I don't want a $200 chip that you hacked to happen to be able to run at that speed. If you want to buy that $200 chip and hack it to run at $500 speeds go for it, there's nothing wrong with that.
- anthk 2y agoCelerons could be overclocked too; much cheaper than a Pentium III back in the day.
- DeathArrow 2y agoIn Core 2 Duo days I overclocked the FSB of my E2160 Pentium CPU by 50%. This boosted the frequency from 1.8 to 2.7. These days I am happy I got my 14700K boost to 6200 MHz on single and dual core loads and to 5600Mhz P-cores and 4400 E-cores in multi-core loads. According to benchmarks this means about 10% performance gains. But it took me a week fiddling with BIOS settings and testing.
- stodor89 2y agoI was in high school, rocking an E2180 with a massive Scythe Ninja cooler. Had a 3.2Ghz "summer" OC profile and a 3.45Ghz "winter" one. Those were the days. My cousin had an E2160 running at the same 2.7Ghz, and a Radeon HD3850 that was softmodded to HD3870. This PC is still running, and it's still overclocked!
- lightedman 2y agoGood times. Back then I used this trick and paired it with an non-laser-locked modded Geforce 6800 AGP card for some gaming. I was lucky that my GPU handled having the disabled cores re-enabled without any issues, and the subsequent performance gains were huge with the additional unlocked speed from the CPU. I stuck with that GPU and CPU combo until the 9800GTX+ dropped.
- gigatexal 2y agoI was way into computers around this time. I remember the race to 1ghz. I remember the monumental change when AMD put the memory controller on die. Such awesome memories. I had durons, coppermines, slotted CPUs, dual Celerons hacked to work all sorts of fun. Heck I was around when you could take a 300A and set the multi to 4.5 and the fsb to 100mhz and get a 150% OC! My first PC was a Commodore 64, then my dad’s hand me down 486. What a beautiful time to be a nerd. 10k 9.1GB loud and hot SCSI drives. Such cool stuff back then
- yokoprime 2y agoI had a 300A@450MHz running for years. Those were great!
- rmellow 2y agoThis reminds me of the time XBox 360s were hacked by drilling the processor at a precise location, at a precise depth [1]. At some point, a tool was made to signal if you drilled far enough. [1] https://m.youtube.com/live/RyW0lXnoFOA https://m.youtube.com/live/RyW0lXnoFOA
- Liftyee 2y agoAlso see the infamous Wii tweezer attack which could dump the system ROM with just a pair of tweezers. Sometimes I wonder how these sorts of exploits are discovered. It must take some serious in-depth knowledge of the target system and a lot of trial and error.
- pathartl 2y agoThe DS's firmware could also be written to by bridging SL1, a point on the board accessible by removing the battery cover. This was used before flashcarts were popular to write FlashMe. It was an alternate firmware that allowed for booting files from a slot-2 device such as a GBAMP.
- SunlitCat 2y agoMaybe my memory is a bit hazy, but wasn't this already possible with the Athlon processors since ~2001?
- BearOso 2y agoYeah, the sub-1GHz Athlon and Durons were 1999, so this article is a little late.
- IndrekR 2y ago1999 was first gen, Slot A based. Second generation (Thunderbird) Socket A based Athlons (and Durons) described here were released 2000.
- SunlitCat 2y agoHah! Was it 2000 already! Got one in 2001 and I was so proud of my AMD Athlon Thunderbird 1400 that I even accepted that loud noise from the cooler I used. Although in hindsight, the money I spend for that luxury would have been better invested in other stuff, improving my life a bit more then a loud and noisy airplane turbine.
- BearOso 2y agoYep. I had a Slot A. You literally just plugged the whole HSF/CPU into the motherboard like an expansion card. Modern PC builders would be perplexed.
- bluedino 2y agoI remember doing this along with a co-worker, I think my Duron was $60 or $80? Saved me a ton of money vs a P3 and board. Might have been long enough to have found the parts on Pricwatch.com?
- kinow 2y agoI remember doing that back by the beginning of 2000s, unlocking one processor, and losing another identical one trying the same (guess I went too far ahead). I didn't work, and my father was not really happy to have to buy a new CPU because of some graphite (but he understood the curiosity!).
- asshatdev 2y ago[flagged]
- moribvndvs 2y agoAhh, the mention of Celeron 300A gives me a good dose of nostalgia. Sorry for the tangent. There was a local retailer and warehouse that turned out to be ran by Russian mobsters (I didn’t know, I was a naive teen), but they had everything under the sun and the prices were (probably literally) a steal, although retail packaging was curiously rare. The guy behind the counter had a box full of loose 300As and let me pick my pair, and I went back and forth between home and the warehouse a couple of times until I had a stable pair. Seeing two of those things hit 450 stable with just a flip of a BIOS setting, for only $100something a piece felt like I had pulled the wool over the world’s eyes. That was my first SMP system, running NT4. Ended up hosting Starsiege: Tribes, Q3, and a bunch of other stuff (often simultaneously) at college. However, I dropped out after my first year and couldn’t host at home, so the machine was largely unused, and I sold it. I regret that.
- gigatexal 2y agoYup! The BP6 and the VP6 from Abit. Good memories! Remember old boards from Epox? Or the TNT2 ultra? But yeah my favorite was getting SMP for free using celerons when they weren’t supposed to be able to do it.
- moribvndvs 2y agoYes, the Abit BP6 was the one! Nestled inside an InWin Q500 full tower case[0]. I was a pretty big Voodoo guy initially. I already had a Voodoo3 but I was working at CompUSA and befriended the Creative Labs rep. He fixed it so I got the TNT2U and I was impressed. I flipped back and forth on the two based on game optimization. When GeForce hit the ground I never looked back. The late 90s/early 2000s were exciting times for PCs. 0 - http://www.dansdata.com/q500.htm http://www.dansdata.com/q500.htm
- gigatexal 2y ago3Dfx had the best looking box art by far.
- RF_Savage 2y agoThe pencil unlock seems to have made a return with the latest hack of running 9th gen Intels on 6th gen mobos. https://hackaday.com/2024/05/31/intels-anti-upgrade-tricks-defeated-with-kapton-tape/ https://hackaday.com/2024/05/31/intels-anti-upgrade-tricks-d...
- Markstar 2y agoYep, those were the days. I still have the Thunderbird CPU that I overclocked using the pencil method sitting on my desk because it was such an awesome CPU. Tangible progress every year that made it worth upgrading your parts and tech news were actually exciting back then (I still remember upgrading from my 386 with 33MHz to a 486 DX4 with 100MHz). Now the tech media is making a big deal about 10% improvements. :/
- lomase 2y agoAnd that small 10% improvement most likely gives you the processing power of hundreds of 486DX
- dehrmann 2y agoI almost want to blame it on how old I was in 2000, but it really was an exciting time for computing. A lot of things that weren't quite ready for prime time were finally ready. 3D games became playable, Windows graduated to a "real" OS when XP put NT in the home, chips were still getting faster... The internet was still being figured out and wouldn't really be ready until ~2005 with widespread broadband adoption. The other big thing that didn't happen until later was SSDs.
- int_19h 2y ago"Real" 3D games happened a little bit before then, though. Descent, Quake, Unreal... This was top of the line 3D gaming as of 1998: https://retronn.de/ftp/videos/unreal_intro_voodoo2_sli.mp4 https://retronn.de/ftp/videos/unreal_intro_voodoo2_sli.mp4
- dehrmann 2y agoMemories... Installing coolers on these chips always terrified me. There was also a weird aftermarket for "shims" that you'd put between the chip and cooler. They had a cutout for the die and contacts on the surface, but I was never sure what they were supposed to do.