3 ms·
How do you test a fuse?
by stavros 2y ago
How do you test a fuse?
- deleted 2y ago[deleted]
- charlieo88 2y agoTerminally.
- stavros 2y agoI admire your optimism that all the fuses will behave similarly.
- alright2565 2y agoFor a hobby project like this, I don't think you need utmost certainty. And if you're building aircraft, why are you shopping on Aliexpress?
- stavros 2y agoNot utmost, but if I put one in my car, it matters if one burns at 2A and the other at 4A.
- charlieo88 2y agoRight? The best you can do it test a sampling of fuse from a batch, to there failure point, which destroys the fuse.
- jabbany 2y agodestructively
- bitwrangler 2y agoI would use a variable power supply, amp meter and some sacrificial fuses. Slowly turn up the voltage while watching amps on the circuit until it blows? Or simply apply the rated amps (with current controlled power supply) to verify if/when the fuse blows. I have a multiple-fuse assortment kit that was a great (too good?) deal from AliExpress. Now I'm thinking I need to do some of those tests myself to verify their rating.
- coryrc 2y agoGet a set of visually-similar fuses that claim to be the same rating. (Visually because you need the shape to be the same). When testing a few to destruction, record the temperature of the fusing element and resistance and power over time. Also measure the temperature at operating current. Now the fuse you want to have the utmost trust in, test it at at half the time it should fail for a given i^2t. The temperature, resistance, and power curve should match the ones you tested destructively. The temperature at operating current should also be similar. If so, you can expect it to fail the way your destructively-tested fuses did. Now, if you trust the metal composition and fusing element shape, a simple resistance meter will tell you if two fuses will behave the same.
- thsksbd 2y agoHow do i measure the temperature of a fuse?
- noSyncCloud 2y agoThermography should work?
- thsksbd 2y agoSo I need a lab to test my Amazon products. I have a lab. What do 99% of consumers do? This is why the grift works.
- BenjiWiebe 2y ago99% of consumers aren't designing a power supply, at least.
- creer 2y agoYou can destructively test samples out of a box of them. But even then the proper current profile that a fuse is supposed to accept or block is far from obvious or intuitive. Reading the spec helps. And then you still have the problem of supplying an acceptable sequence to get a correct result as you desired. Another option is to experimentally send through various current profiles so that you - more intuitively - get a better understanding of whether your thinking of what you want to protect from, might actually happen.
- exmadscientist 2y ago> But even then the proper current profile that a fuse is supposed to accept or block is far from obvious or intuitive. Reading the spec helps. Right. This. Even if you shove the standards in front of their faces, most engineers don't know what fuses really do (prevent fires) or what they don't (save circuit boards) or how fast it happens (not very). Asking your typical engineer to test a fuse lot is not going to give a useful result. This is why there are so very many safety agency marks on fuses and why even the Chinese often skip the BS and just pay for name brand fuses.
- Terr_ 2y agoYou could... whoah, wait a second... isn't this one of the few places where that interview question of "determine the durability of N objects by dropping them from different floors in a building in a minimum of attempts" may actually be relevant?