4 ms·
Are they direct driving most of the joints? It looks like they have a direct-drive motor that can operate joints with no gears.[1] Is that right? If they use a
by Animats 3y ago
Are they direct driving most of the joints?
It looks like they have a direct-drive motor that can operate joints with no gears.[1] Is that right? If they use all direct drive motors, these robots are mechanically simple. No gears, no strings, no pulleys, maybe no separate bearings.
A production line for a custom motor is expensive to set up, but once production is running, each motor is cheap. An encoder is cheap if designed into the motor.
This is the route to volume production.
Machine learning has made the control problem much easier. The classic approach was to work out the dynamics analytically. (I used to struggle with that in the 1990s). That's the old Boston Dynamics approach. Now that's obsolete. BD must be using some machine learning by now. The video of Atlas doing a flip showed the planning process briefly. It was very pre-planned. They must be beyond that by now.
[1] https://shop.unitree.com/products/go1-motor https://shop.unitree.com/products/go1-motor
- margalabargala 3y agoThe motor you linked, and what they are using, is not direct drive. That motor has a 1:6.33 integrated gearbox.
- Animats 3y agoToo bad. It looks a lot like these real direct drive motors.[1] Those are in the same price range, and could get much cheaper if produced in quantity. The nice thing about direct drive motor robots is that you can't strip the teeth of a magnetic field. Impact forces are not a big problem. Robot gear trains are usually the weak point. [1] https://shop.directdrive.com/collections/m15-series https://shop.directdrive.com/collections/m15-series
- Scouttman 3y agoThe 8Nm/kg is impressive for the direct driver servo. It's still however a long way off from the 43.3Nm/kg gained by adding a gear box. Direct drive motors have other advantages such as better torque control and no backlash but out side of very novel motor design or making motor diameters impactical it's hard to beat the torque density of a gearbox. Maybe one day.
- Animats 3y agoWatching those direct-drive robots jump and land smoothly is impressive. No problem with shock loads. They look like they're on springs, but there are no springs; it's all magnetic fields in the motor. With good temperature monitoring and over-speced MOSFETS, those direct drive motors can probably be way overdriven for a few hundred milliseconds. That's probably the future. You don't need that extra power all that often, but sometimes you do.
- maxwell 3y agoGear trains are the killer robots' weak point, eh? Good to know.