3 ms·
You can pull the parts out of the hole anytime you want to - special equipment is normally used, but a rope and a tripod to hold a pulley over the hole works (m
by bluGill 3y ago
You can pull the parts out of the hole anytime you want to - special equipment is normally used, but a rope and a tripod to hold a pulley over the hole works (might not be safe).
What is at the bottom of the hole is a "injector" which is basically a U shaped pipe and a small jet to push water back up. If the well water is only 25 feet below the ground a pump at the top along works. This jet system gets down to 60 feet. The pump down the hole gets to 600 feet (check the pump specs - many are rated to only 250). After that you need oil well type pumps where the motor is at the top of the hole but the pump is lowered down.
- willvarfar 3y ago(I can't find any English lit on it, but my Grundfos Ejektorpump (had to go out and look at it to see what it's called; perhaps the correct translation is ejector pump rather than injector pump?) is in a 85m deep borehole and works great. It's 40 years old, heavily used and never serviced and quite a puzzle how it's still going. I have no idea if they can pump from deeper than that)
- JoeAltmaier 3y agoSome designs might have no moving parts down there? Nothing to go wrong.
- willvarfar 3y agoYou made me more curious to find out about it. https://www.vvsbutiken.nu/product.html/ejektorer-grundfos?category_id=1484 https://www.vvsbutiken.nu/product.html/ejektorer-grundfos?ca... Two normal plastic water pipes descend down to the bottom of the borehole. At the bottom is a brass u-shaped fitting with a inlet with a non-return valve.