2 ms·
> why they didn't do this decades ago You might as well ask why, since we can do it now, Shockley didn't simply start at 3nm. It's all a very long road of indi
by pjc50 3y ago
> why they didn't do this decades ago
You might as well ask why, since we can do it now, Shockley didn't simply start at 3nm. It's all a very long road of individual process techniques.
> You need very tiny wires through very tiny holes in locations very precisely aligned on both sides.
Key word here is "both sides". It has challenges similar to solder reflow on double sided boards: you need to ensure that work done on the first side isn't ruined/ruining work on the second side.
https://semiwiki.com/semiconductor-services/techinsights/288782-vlsi-symposium-2020-imec-buried-power-rail/ https://semiwiki.com/semiconductor-services/techinsights/288... seems to be a good description.
"The challenges with BPR are that you need a low resistance and reliable metal line that does not contaminate the Front End Of Line (FEOL). BPR is inserted early in the process flow and must stand up to all the heat of the device formation steps."
Contamination = metals used musn't "poison" the front-side chemistry. So they end up using tungsten rather than the more usual aluminium. (Copper is forbidden for similar chemistry reasons)
It also (obviously) adds a bunch of processing steps, each of which adds to the cost, more so than putting the rails on the front side.