3 ms·
I have a very few fiber runs, but I just used premade cables and didn't cut them, just made bigger holes. It worked. If I were to do a major rebuild or new bui
by bombcar 3y ago
I have a very few fiber runs, but I just used premade cables and didn't cut them, just made bigger holes. It worked.
If I were to do a major rebuild or new build I might consider asking around, finding someone with a fiber melter willing to stop by in the evening might be worth it.
Fun fact: the outdoor fiber run these days is NOT terminated on site; the installed measured how far away the box was, and then grabbed a pre-terminated roll of fiber that was a bit longer and used that. He said the ISPs don't trust them to terminate fiber, so they just have a bunch of various lengths in the truck, and connect them together, even into the house. So my modem is directly connected to a pre-terminated fiber cable that goes all the way through the ground (shoved into a slit made with a large blade tool) and off into the nearest box (which is just a dry empty box) and then into the pipe to the actual connector about half a block away.
- dicknuckle 3y agoDepends on the ISP and the teams doing the install. I used to work middle mile fiber along roadways from town to town and every bit of that was spliced on-site. There were very few exceptions where we would spec a pre-term cable for cell towers and certain buildings but we would often be splicing inside a building.
- bombcar 3y agoI suspect middle-mile has more trusted crews, this was literally "last hundred feet" or so. He did say he had pretty long pre-termed.
- Tijdreiziger 3y agoWhen they deploy FttH here in the Netherlands, it seems that the first crew just puts unterminated fiber under the sidewalk tiles, and then you make an appointment for someone to come along and splice it into your utility closet.
- supertrope 3y agoTechnicians can be trained to fusion splice at a consistent quality. It's just cheaper to order pre-terminated SC APC cables of various lengths and have them plug them in. FTTH deployment is constrained by financing not tech.
- nottorp 3y agoInteresting, when I got fiber they pulled a fiber without a connector inside the home and welded a pigtail to it with the machine described in the article. Took a while, was fun to watch.
- Aurornis 3y ago> He said the ISPs don't trust them to terminate fiber, so they just have a bunch of various lengths in the truck, and connect them together, even into the house. I suspect it’s more about simplifying the process and the equipment they have to carry. Proper fiber gear has come down a lot in price, but it’s still expensive to put it in every truck, replace it every time someone drops/loses/steals it, and deal with servicing and maintaining equipment. Keeping an inventory of standard lengths that get replenished in the trucks at night by someone who needs virtually no training to manage inventory can shave a lot of costs and headache from an operation.
- bonzini 3y agoGot fiber installed yesterday, they spliced it both inside the house and at the PON splitter.
- kjs3 3y agoI did the same thing running fiber in my older house, and was virtually always able to find a premade within a reasonable number of feet of the length I needed. Yeah, I had to widen a few holes to snake the connectors thru, but it wasn't horrible and all in places you don't see it. If it was new construction, I'd certain pay a few extra $$$ to have a pro do it, because I don't trust me to do a good enough job terminating fiber.