5 ms·
A giant meteorite has been lost in the desert since 1916
- robocat 3y agoUse a magnometer on a winged drone? Presumably filter out high frequency magnetics due to motor noise? Or hang manometer?
- bboygravity 3y agoOk, I'll do it. Give money.
- jvm___ 3y agoWe combed the desert
- a_gnostic 3y agoWe ain't found sh¡t!
- vundercind 3y agoSpaceball to Starfleet officer was a really weird career progression for Tuvok.
- arp242 3y agohttps://www.youtube.com/watch?v=UQ7TnQBSV00 https://www.youtube.com/watch?v=UQ7TnQBSV00
- tlarkworthy 3y agothat's how they do them for real. Only with a helicopter and pilot, but still, with a big magnet and sensors hanging underneath.
- xvector 3y agoInteresting! I think this (and large-scale searches in general) is one area where a drone is probably much more likely to work than a helicopter/pilot, simply because of the sheer area to cover.
- defrost 3y agoInterestingly the data has largely already been acquired globally since the 1950's using fixed wing aircraft, helicopters in places like PNG, and human pilots. Drones took a bit long to arrive. Eg. Australia has already been covered with multi instrument surveys (nine channel magnetics, 256 channel radiometrics, microwave radar DTM, etc.) with 27 million line-kilometres of survey data gridding the country. https://ecat.ga.gov.au/geonetwork/srv/eng/catalog.search#/metadata/70282 https://ecat.ga.gov.au/geonetwork/srv/eng/catalog.search#/me... https://www.ga.gov.au/about/projects/resources/awags https://www.ga.gov.au/about/projects/resources/awags Australian, South African, Russian, Canadian companies and pilots have been jobbing on this work about the globe for decades, in the USofA the USGS and DoE have been surveying internally during the same 70 year period.
- deleted 3y ago[deleted]
- greggsy 3y agoWhat is the primary purpose of these endeavours? Mineral detection, space safety, radio stability, or just general scientific “because we can (and probably should)”?
- defrost 3y agoMineral and energy exploration, either broad area (an entire country or significant part) or more detailed closely spaced examination of specific areas. Such surveys are funded by large companies wanting to extend their exploration data, mid size companies wanting to firm up infomation on a prospect, and national governments | world bank projects that are looking to promote exploration and development in greenfield locations.
- defrost 3y agoYou can fly over the same spot in four different directions and get four different readings. You can fly over the same spot at four different times of day and get four different readings. You also really want nine magnetometers, one for each X,Y,Z axis and repeated on each wingtip and tail boom. If you're going to filter like a professional you need a base station to record the diurnal flux and subtract that in post, you also need to fly calibration clover leafs in a magnetically level wide area and develop a Kalman filter to subract heading generated flux. There's also the active magnetism compensation caused by the aircraft and its components, such as engine accessories, engine masses, avionics, current generated on the fuselage and other factors. If you're running a small fleet of aircraft to cover a million line kilometers or are otherwise pooling results into a standard magnetic map collection each aircraft will need to have its signature influence removed. If you're mapping entire countries over decades then, of course, everything needs to be levelled against the changing IGRF (Internatinal Geomagnetic Reference Field), or the other one (there's another standard global magnetic reference field). Then there's the question of just how small an iron rich rock you could reasonably get a blip from.
- davidmurdoch 3y agoSounds pretty straight forward then!
- defrost 3y agoBoringly routine, at 70 m/s you can get 100,000 km of line data recorded in just under 40 full ten hour days. Add on a few days for calibration, sorting out airstrips and fuel supplies and you're sorted. Next contract please. Of course that leaves the post processing . . .
- regularfry 3y agoI would be somewhat shocked if this was a difficult problem for submarine detection aircraft. It's almost exactly what they're built for. https://en.wikipedia.org/wiki/Lockheed_P-3_Orion https://en.wikipedia.org/wiki/Lockheed_P-3_Orion is what comes to mind, but that's 1960's tech.
- Cthulhu_ 3y agoHow would a giant meteor like that have stayed intact? The article explains why there wouldn't be an impact crater, but even then, it would heat up massively during entry and it wouldn't exactly land softly. Then again, it'd land on sand which might be a bit more forgiving I suppose. But yeah, I'd expect it to shatter, and / or there being a lot of debris around it as well. (I am an armchair internet commenter, I don't know much about these things)
- op00to 3y agoPerhaps it’s a smaller piece of a much larger meteor?
- adastra22 3y agoIt’s a giant hunk of iron. It’s not fragile.
- teaearlgraycold 3y agoLanding in sand, too!
- euroderf 3y agoI want to see a CGI rendering of one of these hits !
- mannykannot 3y agoIf it matches the piece Sidert brought back, it is an approximately equal mix of iron and silica. It would also be many times larger than the largest intact pieces of meteorites found so far (and the largest are all iron), though this is presumably not enough to rule it out being a meteorite.
- newsclues 3y agoLarge object of solid iron hit fairly soft ground and may have broken leaving only the part that was too big to move
- karaterobot 3y agoI just finished reading The Empty Quarter by St John Philby, which has bit about trying to find the lost city of Wabar, now associated with the Wabar meteor crater. The Bedouin guides talk about a chunk of iron the size of a camel, which some of them had seen personally. At the time of the expedition, they couldn't t find it anymore, presumably because the sand had covered it up. This was 1932. In 1966, the sands had shifted again and the iron was visible to a National Geographic expedition. By 1982, it had nearly disappeared again. I have no trouble believing the remains of a meteor could exist in the sands near Mauritania, and not happen to be locatable at the moment.
- madaxe_again 3y agoOr it’s been harvested - historically, meteoritic iron was a significant source of iron in the Sahara, and the techniques for dismantling a meteorite, and the desirability of the readily accessible metal, were well known to local blacksmiths. The fact that he was shown to it in the dead of night, possibly blindfolded, indicates that it was a valuable resource that they wanted to keep hidden. They might do well to do a metallurgical analysis of old pots, pans, and other iron objects in nearby towns.
- alwa 3y agoI’d be interested to learn more about pre-power-tool techniques for dismantling a meteorite of that size. Do you have any reading recommendations? I’m having trouble getting much further than https://en.m.wikipedia.org/wiki/Meteoric_iron https://en.m.wikipedia.org/wiki/Meteoric_iron
- madaxe_again 3y agoHonestly, I don’t know - but meteoritic iron tends to be fairly ductile, so I’d imagine hard rocks used to bash at it to gradually pinch a piece off. Actually, here’s a source - that does indeed seem to be the case. https://www.tf.uni-kiel.de/matwis/amat/iss/kap_a/advanced/aa_2_4.html https://www.tf.uni-kiel.de/matwis/amat/iss/kap_a/advanced/aa...
- 3y ago
- deleted 3y ago[deleted]
- GolfPopper 3y agoWhat are the odds some entrepreneurs quietly chopped up and sold it as ore - either all at once or over several forays- at some point in the last 100 years? It was likely worth something, and even an expedition into the desert seems likely to be cheaper than mining.
- nine_k 3y agoCutting a large chunk of iron/nickel alloy is really hard. It would require bringing serious power tools, a large source of energy to power them (not solar), and a crew of people who could operate and fix all of these in the harsh environment of the desert. Not impossible, but likely won't be cost-effective for several tons of plain "iron ore" or "scrap metal". But if that thing contained gold and platinum, maybe! :)
- squirtle24 3y agoAll you need is Bruce Willis and his team of oil drillers to break up an asteroid.
- MichaelMoser123 3y agoi thought the "little prince" came later...
- deleted 3y ago[deleted]
- skbohra123 3y ago[flagged]
- MichaelZuo 3y ago> One detail in particular is strikingly credible: Ripert described finding "metallic needles" in one area of the meteorite that he tried to break off by hitting it with the fragment. The needles proved too ductile. In 2003, scientists discovered that iron meteorites often do indeed contain nickel-rich spikes that are similarly ductile. There is no way Ripert (or any contemporary scientist) would have known about that in 1916. There doesn't seem to be any other explanation, other than him having actually seen such odd 'needles'. It's not something one would just make up out of the blue.
- BXLE_1-1-BitIs1 3y agoPeary took an iron meteorite from Greenland to the chagrin of the local Inuit who had been using it for knives. Whacking it with a rock in -40 temperatures might have been the mechanism. The meteorite is now in a New York museum.