3 ms·
woww, you have hit upon the solution: data on sleeve (with series resistance), 5 volts on tip, ground on ring. headphones will not provide a current path betwee
by kragen 3y ago
woww, you have hit upon the solution: data on sleeve (with series resistance), 5 volts on tip, ground on ring. headphones will not provide a current path between tip and ring and so will not burn out. current limiting is still necessary to protect the power source from shorted output. the headphone plug sleeve is necessary for any circuit through the headphones and only ever contacts the sleeve of the jack
thank you!
as for usb, i won't be using it
- kragen 3y agohmm, actually this doesn't help much. because the headphones do provide a current path between tip and ring: through one earspeaker to ground and then through the other one. this does provide more resistance than the alternative, but usually not enough to make a difference; if each earspeaker is 25Ω, 5 volts across it would give you 200mA, and 5 volts across both of them in series will give you 100mA, which is what I was planning to use for the current limit anyway i think maybe i'll just go with trrs to avoid this problem