3 ms·
Wasn't this on HN a few days ago? There are already good metal printers. They're usually sintering systems - put down a powder and fire it in a furnace. There
by Animats 3y ago
Wasn't this on HN a few days ago?
There are already good metal printers. They're usually sintering systems - put down a powder and fire it in a furnace. There are systems for 3D printing sand molds for casting.[1] Both of those processes are much more precise than this one.
Metals do usually have a phase in which they're solid, but malleable, and can be worked with modest forces. "Modest" usually means hammers, large presses, or a rolling mill. A good metal extruder working with red-hot but not molten metal would need to be able to apply similar forces. That's what the 3D printers that work with wire and are similar to welders do.[2]
There's directed energy deposition, which converts metal powder to molten metal for a fraction of a second at the deposition point.[3]
This liquid system has the same problem as the 3D printing systems for concrete that were being touted a few years ago. Some kind of molding or die is needed to guide the material at the point the metal becomes a solid, or the result is very rough.
[1] https://www.voxeljet.com/3d-printing-solution/sand-casting/ https://www.voxeljet.com/3d-printing-solution/sand-casting/
[2] https://www.youtube.com/watch?v=z3nNlVcoba8 https://www.youtube.com/watch?v=z3nNlVcoba8
[3] https://www.youtube.com/watch?v=oL7bMhPTtDI https://www.youtube.com/watch?v=oL7bMhPTtDI
- iancmceachern 3y agoAlso the Mantle printers look promising