3 ms·
the sunlike levels that are natural and can affect your seasonal depression are 10 kilolux and up; direct sunlight is 100 kilolux. typical indoor illuminance l
by kragen 3y ago
the sunlike levels that are natural and can affect your seasonal depression are 10 kilolux and up; direct sunlight is 100 kilolux. typical indoor illuminance levels (one bright lightbulb per ten square meters or so, such as a 100-watt incandescent or 10-watt led) are closer to 80 lux: https://en.wikipedia.org/wiki/Lux#Illuminance https://en.wikipedia.org/wiki/Lux#Illuminance
from this, you can easily calculate that, to illuminate the room to natural, seasonal-depression-affecting levels, you need on the order of 100 lightbulbs in a room that size, which will produce about a kilowatt of heat, similar to an electric space heater ('bar fire' in the uk)
(to calculate it another way, a lux is a lumen per square meter, a 10m² room has about 60m² of surface area, and a typical bright lightbulb emits 1000 lumens, so assuming no directionality and black walls and ceiling, you'd need about 600 of them to reach 10 kilolux. you need less than that because the walls do in fact reflect most of the light that falls on them and the bulbs do in fact have some directionality)
this is clearly an achievable project, and there are several people who have done it, and they report good results. however, 99% of the people reading this comment have never in their lives seen a room illuminated this brightly except through a large skylight, such as in a greenhouse
i've thought about undertaking it myself, but with a couple of tweaks:
- rather than illuminating an entire room to daylight levels, i'd like to try using one of those indoor grow closet things that people sell for growing marijuana, one that's big enough to sit inside of. that way i can use only a few thousand lumens instead of hundreds of thousands of lumens, which greatly reduces not only the materials cost but also the heat removal problem
- lumens are more than an order of magnitude cheaper from fluorescent tubes (not cfl lights—the straight tubes) than from leds, and though the efficiency suffers, it only suffers marginally
- light-emitting monitors, even the current ones whose brightness people are complaining about, are not bright enough for comfortable reading in outdoor environments; if you want to use a computer in there, you need a transflective or reflective screen of some kind
if you're interested in undertaking this project for yourself, my past notes and calculations on the subject are in https://dercuano.github.io/notes/10klux-led.html https://dercuano.github.io/notes/10klux-led.html and https://dercuano.github.io/notes/illumination-cost.html https://dercuano.github.io/notes/illumination-cost.html