3 ms·

"Replace your ceiling fan and treadmill" is certainly not easier than having a small device sitting on my desk.

by 2024throwaway 3y ago

wil421 3y ago
Why on earth would you do that? An IR blaster costs $25 and will connect to Homebirdge so you have it in Apple Home (or Android whatever). I made 2 dehumidifiers and 2 floor fans “smart” by buying the cheapest possible smart plugs on Amazon, an Amazon branded smart plug cost me $1 during a sale. BroadLink RM4 Mini IR Universal Remote Control, Smart Home Automation Wi-Fi Infrared Blaster https://a.co/d/8GnOVRU https://a.co/d/8GnOVRU
- 2024throwaway 3y ago
  That covers the floor fan. Now I need a radio blaster to control the ceiling fan and treadmill. So two extra devices, plus having to set up new automation integrations. This all sounds WAY more complicated than just cloning the remotes like I've done. Would it be more flexible/powerful? Absolutely. Do I need any of that? Absolutely not.
  - wil421 3y ago
    Then you pay $15 more for the IR/RF blaster combo and a $35 raspberry pi 3. If you can copy an image to an SD card you can install homebridge (or home assistant). You already saved money over the $169 cost of a flipper zero and your fans/treadmill can come over whenever you enter the room or at a certain time of day. If you can play with a flipper zero you can setup automation.
    - 2024throwaway 3y ago
      I honestly don't know what point you are trying to make. Of course I can set up automation. I have Home Assistant running in my house already. I also happen to own a Flipper that does a great job at controlling these devices. Why would I introduce complexity where simplicity is working great? I'm done with this conversation, I'd say it's been fun, but..
- nosrepa 3y ago
  OP said only one device was infrared and you don't know how their other devices behave when just turned off and on. Also, smart plugs can only turn things off and on., whereas OP cloned the whole remote.
Larrikin 3y ago
What is the use case for a flipper zero and a treadmill? There are plenty of automations you can do with a treadmill and a smart plug, but I can't think of a single use for a treadmill and any of the components in a flipper zero. Are you just turning on the fan from the treadmill? That would be better served using a power reading from the treadmill and an IR blaster. You can tie in other automations as well. I have mine setup to turn off a light that causes a TV glare visible only from the treadmill and to turn on an extra speaker next to the treadmill
- 2024throwaway 3y ago
  It is an under desk / walking treadmill. I'm turning it on and off and adjusting the speed. I really don't need more advanced automation.

"Replace your ceiling fan and treadmill" is certainly not easier than having a small device sitting on my desk.

Why on earth would you do that? An IR blaster costs $25 and will connect to Homebirdge so you have it in Apple Home (or Android whatever). I made 2 dehumidifiers and 2 floor fans “smart” by buying the cheapest possible smart plugs on Amazon, an Amazon branded smart plug cost me $1 during a sale. BroadLink RM4 Mini IR Universal Remote Control, Smart Home Automation Wi-Fi Infrared Blaster https://a.co/d/8GnOVRU https://a.co/d/8GnOVRU

2024throwaway 3y ago
That covers the floor fan. Now I need a radio blaster to control the ceiling fan and treadmill. So two extra devices, plus having to set up new automation integrations. This all sounds WAY more complicated than just cloning the remotes like I've done. Would it be more flexible/powerful? Absolutely. Do I need any of that? Absolutely not.
- wil421 3y ago
  Then you pay $15 more for the IR/RF blaster combo and a $35 raspberry pi 3. If you can copy an image to an SD card you can install homebridge (or home assistant). You already saved money over the $169 cost of a flipper zero and your fans/treadmill can come over whenever you enter the room or at a certain time of day. If you can play with a flipper zero you can setup automation.
  - 2024throwaway 3y ago
    I honestly don't know what point you are trying to make. Of course I can set up automation. I have Home Assistant running in my house already. I also happen to own a Flipper that does a great job at controlling these devices. Why would I introduce complexity where simplicity is working great? I'm done with this conversation, I'd say it's been fun, but..
nosrepa 3y ago
OP said only one device was infrared and you don't know how their other devices behave when just turned off and on. Also, smart plugs can only turn things off and on., whereas OP cloned the whole remote.

Larrikin 3y ago

What is the use case for a flipper zero and a treadmill? There are plenty of automations you can do with a treadmill and a smart plug, but I can't think of a single use for a treadmill and any of the components in a flipper zero. Are you just turning on the fan from the treadmill? That would be better served using a power reading from the treadmill and an IR blaster. You can tie in other automations as well. I have mine setup to turn off a light that causes a TV glare visible only from the treadmill and to turn on an extra speaker next to the treadmill

2024throwaway 3y ago
It is an under desk / walking treadmill. I'm turning it on and off and adjusting the speed. I really don't need more advanced automation.