3 ms·
The US government-owned facilities are not the only US source of 155mm rounds. NAMMO [1] is a major manufacturer, and they have a facility in Mesa, AZ. Here's t
by Animats 3y ago
The US government-owned facilities are not the only US source of 155mm rounds.
NAMMO [1] is a major manufacturer, and they have a facility in Mesa, AZ.
Here's their marketing video for 155mm rounds.[2] Nammo's management complains that they
are being offered 3-4 year contracts, and they need 10-15 year contracts to build new factories.
Peacetime demand for large-caliber ammo is very low, so when there's not a war on, factories
are mothballed.
BAE and Rheinmetall also make 155mm rounds, and many of those are going to Ukraine.
Israel is unhappy that the US stores of ammo in Israel are being sent to Ukraine, and
is ordering domestic manufacture from Elbit.
The article doesn't make a clear distinction between the foundry and machining steps in the process. The first part involves casting and forging molten metal, and the second is ordinary machining.
They don't have to be carried out in the same plant. Either or both can be outsourced separately.
Filling, where explosives go into shells, is done in dedicated plants with lots of separation between buildings, buried storage bunkers, and many other safety precautions. That's the dangerous part but not the bottleneck.
Here's a modern 155mm shell forging plant in Germany.[3]
[1] https://www.nammo.com/product/our-products/ammunition/large-caliber-ammunition/155-mm-series/ https://www.nammo.com/product/our-products/ammunition/large-...
[2] https://www.youtube.com/watch?v=HrUV1uktRZg https://www.youtube.com/watch?v=HrUV1uktRZg
[3] https://www.youtube.com/watch?v=pNtmrYeBwWQ https://www.youtube.com/watch?v=pNtmrYeBwWQ
- fransje26 3y ago> Israel is unhappy that the US stores of ammo in Israel are being sent to Ukraine Yes, they have their own ground-leveling to do after all..
- jalapenos 3y agoGrounds not going to level itself now is it
- avmich 3y agoI somehow doubt Israel uses a lot of 155 mm artillery shells per day at the moment.
- Animats 3y agoNot only is Israel using them, Israel is trying to get the US to pay for them.[1] [1] https://www.washingtonpost.com/national-security/2023/11/13/israel-us-155mm-artillery/ https://www.washingtonpost.com/national-security/2023/11/13/...
- red-iron-pine 3y agoThey have JDAMs, and their opposition doesn't have AA... or tanks. Less need for 155mm
- morsch 3y ago> Here's a modern 155mm shell forging plant in Germany.[3] > [3] https://www.youtube.com/watch?v=pNtmrYeBwWQ https://www.youtube.com/watch?v=pNtmrYeBwWQ That appears to be a Serbian company, though?
- helij 3y agoLooks like someone commissioned this Serbian company to make machinery for making shells. Not clear if it was a German client.
- jalapenos 3y ago> Peacetime demand for large-caliber ammo is very low Even in the US?
- oblio 3y agoI doubt Texan gun ranges need a lot of 155mm.
- 83 3y agoIf it were allowed and available I bet a huge amount of Texans would be buying 155mm just for bragging rights.
- red-iron-pine 3y agoone more reason to buy an oversized truck -- "gotta haul my ammunition!"
- Tostino 3y agoYou also need it so you can move your towed artillery piece to shoot the rounds. It just makes sense.
- deleted 3y ago[deleted]
- fragmede 3y agoAlright, I'll bite, because I bet there's somebody out there that knows: why isn't it allowed? What rule by the ATF says that 150mm isn't an arm allowed by the second amendment?
- dumah 3y agoIt’s not administrative, but legislative. ATF is empowered to interpret these laws. The law is quite clear that a howitzer is regulated. https://en.wikipedia.org/wiki/Destructive_device https://en.wikipedia.org/wiki/Destructive_device
- rob_lh 3y agoJust waking up to find this on HN. The points you make are completely correct. I tried to keep the focus on just US production, as I was specifically interested if there was anything I could do to help. Splitting up the process was something I considered, but didn't have the bandwidth to put into knowing when/how you split it. In a crunch, I'm still not sure if it would be best to split it or to just do what's usually best and co-locate all the machines (or some combination of both). Similarly, I couldn't get good answers about how many shifts the existing facility runs. I expect it's 2, and in a war, it's easier to staff the 3rd shift (or automate it in a new facility). The contract length part I covered, and I'm convinced that's the main issue.