3 ms·
AirPods are Bluetooth Class 1 devices and can transmit at 100 mW as well! A larger (omnidirectional) antenna doesn't increase the EIRP either, which is what is
by lxgr 3y ago
AirPods are Bluetooth Class 1 devices and can transmit at 100 mW as well! A larger (omnidirectional) antenna doesn't increase the EIRP either, which is what is limited in case for both Bluetooth and 802.11.
> And in a busy environment (I often see dozen's of APs in a scan) pretty much every channel is occupied
Most of these channels are overlapping anyway, so we're really only talking about 3 or so channels in the 2.4 GHz band.
And due to CSMA/CA, 802.11 has to back off in case of sensing any sufficiently powerful interference. Bluetooth Class 1 definitely seems like it would qualify, so Bluetooth will actually make 802.11 on all of these channels back off, reducing the duty cycle and creating enough gaps for Bluetooth to statistically get its transmissions through.
Bluetooth audio (A2DP) only needs about 300 kbit/s anyway; that's less than 20% of the total possible Bluetooth throughput, so even if every single transmission needs 5 retries, you'd still not have audio dropouts.
I've never been in an environment where 802.11 was actually able to overwhelm Bluetooth audio connections, neither A2DP (which is heavily buffered), nor HFP (which isn't). Microwaves or older "non-backoff" 2.4 GHz transmitters (old babyphones, analog cordless phones etc.) definitely can, though.