4 ms·
OFDM and QAM are techniques that increase the data throughput through a channel of fixed bandwidth, but this is achieved by increasing the transmission power mo
by adrian_b 3y ago
OFDM and QAM are techniques that increase the data throughput through a channel of fixed bandwidth, but this is achieved by increasing the transmission power more than the increase in speed.
They are not at all efficient from the point of view of the energy consumption.
The best energy efficiency is achieved with quadrature phase modulation (QPSK), which allows very low transmission powers relative to the noise of the communication channel.
Any increase of speed above that is obtained by a worse energy efficiency.
Despite that, OFDM and large QAM constellations are very frequently used because for the modern WiFi or mobile phone communication it is typical to be very close to the access point or to the cell phone tower so the transmitter is able to use a power much greater than the minimum necessary, in order to increase the data throughput.
For logic circuits, the constraints are very different than for communication channels. If the logic circuits use DC power supplies, then the controllable elements, like transistors or vacuum tubes, must use only 2 states, on and off, otherwise they would consume too much power. So even if one would want to make a gate with ternary logic, it would have to be composed of transistors with binary states, otherwise it will overheat at the current circuit densities.
- londons_explore 3y agoFor a fixed average transmission power, bandwidth and noise power, QAM provides more goodput than QPSK, and at larger constellation sizes the gap increases. In fact, QPSK is just a type of QAM with a constellation size of 2.