4 ms·
> However, if you want a home network that’s simple to configure, easy for your guests to borrow, hassle-free, and that all of your Smart Home gadgets can conne
by JohnFen 3y ago
> However, if you want a home network that’s simple to configure, easy for your guests to borrow, hassle-free, and that all of your Smart Home gadgets can connect to, then you should close this tab now
Or do what I do: run multiple APs. I have my primary one, which is very tightly secured and monitored, and only gives access to my local VPN. I have a guest one, which is only as secure as any average AP and gets you internet access, but no access to my LAN. If I used "smart" gadgets that I couldn't really control and trust, I'd set up a subnet just for them alone.
- tylerflick 3y agoThis is exactly what I do. IoT stuff sits on its own AP attached to a jailed LAN.
- scottyah 3y agoSo do you have to switch the wifi on your phone to access the IoT stuff?
- umeshunni 3y agoI'm guessing it's the same wifi network, just on a different vlan
- andrewaylett 3y agoNo -- not the GP, but I have a separate IoT SSID and VLAN with a distinct subnet. I run an mDNS repeater (or rather, my Unifi controller runs it for me) to allow discoverability across subnets. The benefit, such as it might be, is in the ability to use a stateful firewall between the subnets and that I can have a relatively secure PSK that I don't need to rotate when I rotate any of my other SSID PSKs. Relevant to the article, I also have a WPA-3 Enterprise SSID, a WPA-3 PSK SSID and a WPA-2/3 PSK guest/children's SSID. The different subnets have different sets of rules for what they may access and which DNS settings are applied by default.
- jmole 3y agoYou can run multiple SSIDs on the same AP and segment your networks with VLANs. No need to buy multiple APs unless you need the coverage.
- outworlder 3y agoAnd in this case the coverage would be even worse unless they duplicated all APs for both networks. It's probably much more cost effective to do what you suggest, and that's exactly what I do. Multiple SSIDs (one for the household, another for IOT stuff, another for work and another for guests) and control access via VLANs.
- lolinder 3y agoIs there a reason you split IoT stuff off of the guest network? On my network we just have a guest network which denies LAN access to anything connected to it, but I'm wondering if there's a good reason to split IoT off entirely.
- iforgotpassword 3y agoI guess it depends on what kind of friends you have, but assuming iot devices are insecure rubbish, I wouldn't want them on the same network as guests. But then again you might want to turn on client isolation for the guest network, so that wouldn't really be an issue.
- lolinder 3y agoYeah, I have guests all isolated from the LAN already.
- iforgotpassword 3y agoClient isolation means the clients on the network can't reach each other. This would prevent them from attacking each other or your insecure iot devices. Otherwise your friends will backdoor your security camera. ;-)
- sneak 3y agoAnyone can have access to my LAN. It’s not a security boundary, and pretending like it is means you can never safely connect to airport or hotel wifi.