3 ms·
I don't think I ever got a stable disk above 1.6MB. Which was just enough for a few things but generally not worth it. The motors in the disk drives could be c
by hinkley 3y ago
I don't think I ever got a stable disk above 1.6MB. Which was just enough for a few things but generally not worth it.
The motors in the disk drives could be controlled directly, and you could pack the tracks tighter by stepping the motor just a little bit less than you were supposed to. And in theory if you did it right, other disk drives could read it.
'In theory' is carrying a lot there. I tended to find 1.5something to 1.6something worked and anything higher rarely ever did.
- rasz 3y agoMicrosoft had no problem with 1680KB https://en.wikipedia.org/wiki/Distribution_Media_Format https://en.wikipedia.org/wiki/Distribution_Media_Format
- tom_ 3y agoThis is probably only suitable for write-once PC media as the timing would be quite tight for reliably modifying individual sectors in place.
- scoot 3y agoCould you really step less than a standard track? I would have assumed that the stepper motor's steps are track aligned, so either you step, or you don't...
- NegativeLatency 3y agoI’d imagine it’s very hardware specific
- rasz 3y agoNo, no standard Shugart interface compatible floppy allows you to do that.
- scoot 3y agoThanks, yes, the article seems to confirm that: "There are 80 tracks on your average 3.5" floppy drive. You can select a given track by pulsing the STEP pin and combining it with the direction select pin."
- hinkley 3y agoYeah I haven’t touched this stuff in twenty five years. It was sectors not tracks they futzed with. The first few generations of consumer hard drives adopted some of these same techniques.
- hinkley 3y agoToo late to edit. It was extra sectors not tracks, although is looks like some people added another track or three at the edge of the disk.