3 ms·
Ah, so e.g. something like a device flipping between “powered” and “not powered” states, which then wears out some part that doesn’t expect that state change to
by lxgr 3y ago
Ah, so e.g. something like a device flipping between “powered” and “not powered” states, which then wears out some part that doesn’t expect that state change to happen so often?
- dylan604 3y agono, not quite. a dip is some lower than the accepted deviations from the expected value. if you have an accepted range of +/-10%, but the dip causes the voltage to drop 15%, that's a dip. some places define an outage as being less than 5% of expected value. so somewhere before outage, you have a severe undervolt situation where the equipment struggles. the longer the dip lasts, the worse things can get. one of the shops that I worked at suffered a catastrophic situation when a nearby construction crew cut one phase of the 3-phase power coming into our facility. the poor transformer died, and took out the some of the more delicate PSUs attached to some very expensive equipment. we were down for weeks recovering from that.