3 ms·
Before someone says conduit in all the walls, that only works if the conduit comes out where you want something. Your intercom system probably terminates by eac
by bluGill 3y ago
Before someone says conduit in all the walls, that only works if the conduit comes out where you want something. Your intercom system probably terminates by each door at around waist level - which is unlikely to be where you want Ethernet cables to come out in the room - but perfect for an intercom. In the 90s people were starting to run phones to more rooms, but not to all rooms, at least those phone jacks would be in the right place. Likewise in the 90s people were running coax to more rooms - but a TV in every room was still seen as a sign of wealth and so most bedrooms wouldn't get it (the master would. though often that coax would be near the ceiling for watching in bed and thus not a great location for Ethernet.
- Tempest1981 3y ago> coax would be near the ceiling I've been amazed watching contractors cut out a slice of drywall, make mods, and replace the drywall. In under an hour. But you need to paint afterwards.
- nostrademons 3y agoIt doesn't have to be perfect. If you had an opening by the baseboard on major walls, you could run through conduit to get to the right room, and then tack a cord along the baseboard and up corners of walls until you got to the right place, the same way most people wire their TV/media room right now. The main issue is running cords through doorways, which keeps them from closing and is a tripping hazard. People can live with cable ties as long as you get most of the run hidden.
- saalweachter 3y agoBeyond that, if you have conduit running to different rooms, you can now treat those as junction boxes instead of termination points. You can run the cable to the box easily, and then have ten feet of the old fashioned painful cable pull from the junction box to the point on the wall/ceiling you actually want to have a socket. Perfect, good, etc.