3 ms·
Virtually every step in the iFixit upgrade guide for separating the screen glued onto my iMac was followed by "if you do this wrong you'll crack the screen" so
by password4321 3y ago
Virtually every step in the iFixit upgrade guide for separating the screen glued onto my iMac was followed by "if you do this wrong you'll crack the screen" so I've stuck with it as a beautiful screen for connecting to other more powerful machines.
- linmob 3y agoI was going to add an caveat about that, but it turns out, that for the iMac 5,1 (the model discussed in the article) RAM upgrades are easy [1] (SSD not so much, but it should still be better than some of its aluminum successors [2]). That said, I definitely agree and advise: Before you order parts to upgrade things, check whether you feel up for the install procedure. [1] https://de.ifixit.com/Anleitung/iMac+Intel+17-Inch+RAM+Replacement/886?lang=en https://de.ifixit.com/Anleitung/iMac+Intel+17-Inch+RAM+Repla... [2] https://de.ifixit.com/Anleitung/iMac+Intel+17-Inch+Hard+Drive+Replacement/891?lang=en https://de.ifixit.com/Anleitung/iMac+Intel+17-Inch+Hard+Driv...
- cpuguy83 3y agoI upgraded the hdd to an ssd in a 2009 iMac. Don't think I ever noticed the "you may crack it" warning. Honestly it's not too bad. The more painful thing is actually working on the guts while also trying to hold the screen up (because it's attached to things). That said, the RAM is user-accessible on these older iMacs from a tray at the bottom edge of the screen.
- macNchz 3y agoI upgraded both of my parents iMacs (about 10 years old now, but importantly with USB 3), which would otherwise have required screen removal to do the drive, by just hooking up a portable USB SSD, making it the boot drive, and taping it to the back of the machine. Huge improvement over the HDD.
- awiesenhofer 3y agoThese older iMacs like the one in the article didn't use glue yet! That only started with the 2012 ones iirc. So anything before that is pretty easy to fix or Upgrade! (Especially the old aluminum ones, they just had magnets holding the front bezel in place)