2 ms·
I wish we could have UPS systems that could take large bring-your-own 12v size LiFeP04 batteries. The ones with terminals that look like car batteries.
by m463 3y ago
I wish we could have UPS systems that could take large bring-your-own 12v size LiFeP04 batteries. The ones with terminals that look like car batteries.
- dtx1 3y agoFact: All Battery powered devices should have easily user replaceable batteries
- jacquesm 3y agoAhhh but that sweet incompatibility driven mark-up...
- black_puppydog 3y agoDon't worry, the market will self-regulate. Any day now! :)
- jacquesm 3y agoIt's happening: https://www.cordless-alliance-system.com/ https://www.cordless-alliance-system.com/ and https://www.powerforall-alliance.com/en/ https://www.powerforall-alliance.com/en/ Of course there had to be multiple efforts...
- black_puppydog 3y agoayayay, that reminds me to check the battery of my ~2008 Bosch :D
- jacquesm 3y agoYes, you should. But, even if the construction of the Bosch packs is not up to their usual standards (especially the pannier mounted packs are terrible from a water ingestion POV) the BMS is top notch and it tends to shut down the battery if it detects any serious problems, far better than most el-cheapo BMS. Look for any traces of moisture on the boards and the cells and if you spot any it is probably safer to discard the pack or have it rebuilt. The seals need very careful attention, less so in the frame (vertically mounted) packs. The powertubes are much better from an engineering point of view.
- jjeaff 3y agoMost any UPS that has a user replaceable battery can be swapped to 12v lifepo4 batteries. they won't likely fit, but I took the two 12v lead acid batteries out of my UPS and extended the wires out the back and to a new shelf that holds two 12v lfp4 batteries. You should get 12v lifepo4s that have built in BMS to protect them from over/under charge. Mine works great and I added a lot more watt hours to it. The only thing that won't work well is the battery level percentage indicator since lfp4 don't read the same as lead acid.
- massifist 3y agoI have an older (cheapo) UPS that I just replaced the battery on, which is probably over 15 years old now. It was much easier than I thought. Coincidentally, right after I replaced the battery and left it to charge overnight, it saved my workstation from a power outage [events which aren't too common in my location] the very next day. It was quite satisfying to be able to save my work and shut down properly. The old battery had stopped working long before replacement. So I guess the UPS was no better than a surge protector at that point.
- aaronax 3y agoThese exist, just look for inverter/chargers. Tripp-Lite APS750 as an example though may not be LiFePO4 compatible. I use one as a sump pump power backup. Various Victron products as another example that are actually LiFePO4 compatible: MultiPlus, Quattro, or others depending on what capabilities you need.
- SigmundA 3y agoThey have them, they are called inverter-chargers. I recommend Victron or Magnum for quality with UPS grade switchover. I keep wanting to do a Victron 3000 12v for a critical loads in my house (fridge, lights, outlets) to use with some spare 6V lead acids I have I took out of my RV when I switched it to LFP. In the future I could switch the batteries out for LFP if I wanted. If building from scratch I would probably do a 48v rack style LFP with 48v inverter instead again probably Victron, wish they would make a rack mount version.
- jacquesm 3y agoVictron is good stuff, seconded. Used extensively in marine applications, I've yet to see a unit fail that wasn't purposefully abused.