2 ms·
A few of those in series, with a regenerator stage after each one, would work. It's hard to find non-IC delay lines today. "Analog" delay lines in guitar pedal
by Animats 3y ago
A few of those in series, with a regenerator stage after each one, would work.
It's hard to find non-IC delay lines today. "Analog" delay lines in guitar pedals now use a charge-coupled bucket brigade IC. They're analog in amplitude, but discrete in time. I was expecting that someone would still be manufacturing some kind of acoustic delay line product, but there's not much out there.
The EDSAC rebuild people built a delay line memory.[1] Not too complicated, but a pain to get it to work.
You need a piezoelectric or magnetostrictive transducer driving a metal rod, with a receiving sensor at the other end.
Liquid level sensors which work that way are common. A metal rod dips into the liquid, and a transducer at the top sends a ping down the rod. The impedance change where the rod enters the liquid causes a reflection, which is sensed by the transducer that sent the pulse. Converting one of those into a delay line might be possible.
You need some length. The speed of sound in steel is around 5,000 meters per second, so you'll need 5 meters for a millisecond delay. This can be a coil; it doesn't have to be straight. A longer delay line can store more bits, but the cycle time is slower.
These things are temperature sensitive, so they either have to be self-clocking or temperature controlled.
[1] https://www.youtube.com/watch?v=9BA4AyvlKnM https://www.youtube.com/watch?v=9BA4AyvlKnM
- orbital-decay 3y agoIf I remember correctly some old textbooks I've read, these lines were usually made of invar or a similar alloy to avoid the thermal expansion, and the torsional wave spreads slower (around 3km/s). Reflections were dampened using rubber pads.