3 ms·
A good real world example is fluid flow such as a gas compressed through a pipe, say a trumpet or an exhaust. If the standing wave in the pipe isn't optimal at
by jacquesm 3y ago
A good real world example is fluid flow such as a gas compressed through a pipe, say a trumpet or an exhaust. If the standing wave in the pipe isn't optimal at the exit of the pipe a part of the energy will end up reflected which causes a very real obstruction and higher pressure. In a trumpet this manifests as a resonant filter that will leave all but a couple of frequencies without significant damping and that is the note (+ overtones) that you hear. In an exhaust such tuning will result in the system performing optimally at certain RPMs, and if you match that to when you want the engine to produce maximum power you can create a peak by get rid of the exhaust gases at that peak. Hence resonant exhaust systems tuned to the theoretical peak of an engine.
- alfiedotwtf 3y agoThat's a cool analogy! I wonder if the exhaust could by dynamic i.e change length depending on the RPMs
- teeray 3y agoMany antennas do this (screwdriver antennas come to mind), so I’d expect some similar ability to do this with exhaust. The only issue I can think of is turbulence from the seams of segments that extend.
- jacquesm 3y agoThe answer is: yes. The results: 6% gain or thereabouts with a fairly impressive amount of extra complexity. But it can be done. https://www.researchgate.net/publication/322390752_Continuously_Varying_Exhaust_Pipe_Length_and_Diameter_to_Improve_the_Performance_of_a_Naturally_Aspirated_SI_Engine https://www.researchgate.net/publication/322390752_Continuou...
- function_seven 3y agoWay back when Jet Skis had 2-stroke engines, you could buy an aftermarket exhaust pipe with water injection in a couple key spots. This allowed the pipe to be dynamically tuned to different RPMs by changing the speed of sound within the pipe. The stock pipe was tuned to a specific RPM, allowing the reflected exhaust pulse to return to the cylinder just as the port was closing and “slam the door” on the fresh air/fuel charge. With variable water injection, you could have more than one optimal RPM. (All this is from memory as I read the ads in Splash magazine.)
- jacquesm 3y agoOh that's so clever, to use the water that is there anyway as a means of affecting the dynamics of the pipe. Whoever came up with that was on another level.
- jiveturkey 3y ago> real world example electric/electronic circuits operate in the real world. mechanical example is what you're after.
- pests 3y agoHere is a YouTuber who is making a physically based audio engine using fluid dynamics (demos so far for various engines, a trumpet, a steam whistle, dev videos) https://www.youtube.com/channel/UCV0t1y4h_6-2SqEpXBXgwFQ https://www.youtube.com/channel/UCV0t1y4h_6-2SqEpXBXgwFQ A lot of what you wrote reminded me of what he is working on - the trumpet sim is not entirely accurate yet but watching those reflections bounce and forth like you describe is very interesting. Trumpet Video: https://www.youtube.com/watch?v=rGNUHigqUBM&t=87s https://www.youtube.com/watch?v=rGNUHigqUBM&t=87s
- jacquesm 3y agoThat's amazing, incredible programming and analysis skills on display there.