49 ms·
This vehicle has 10 axles, so it should put less wear on the road than a typical truck&trailer with 5 axles with a capacity of 45-55 tonnes of cargo. Wear is
by bryanlarsen 3y ago
This vehicle has 10 axles, so it should put less wear on the road than a typical truck&trailer with 5 axles with a capacity of 45-55 tonnes of cargo. Wear is directly proportional to the number of axles.
- SoftTalker 3y agoBut more tires, more tire wear, more micro-plastic pollution from the tire wear, etc.
- bryanlarsen 3y agoNope. Twice the number of tires means half the weight per tire. Half the weight means 1/16 of the wear per tire. Twice the number is 2X, so overall 1/8 the impact.
- TerrifiedMouse 3y agoAny reason why we don’t put as many tires on (existing) trucks as possible? Seem like a good deal reducing tire wear.
- Rebelgecko 3y agoTruck drivers don't have to pay for the negative externalities of tire wear
- paulclinger 3y agoIt will complicate the control of the truck and add more components (increasing the cost).
- rootusrootus 3y agoIt would probably increase wear, not decrease it. When a vehicle with more than one non-steering axle turns, some of the tires must slide. It's mostly not too noticeable unless the corner is fairly tight or the trailer has at least three axles. You don't really want any more wheels on the ground than you need to support the load. Or you need to allow those axles to pivot. Heck, even with my modest two-axle travel trailer I leave tire marks on my driveway where I have to turn sharply to get it onto the road.
- dgacmu 3y agoIncreased friction -> uses more gas/energy. Complicated the mechanical design; more moving parts you have to maintain in a more crowded area.
- mc32 3y agoI think we need to look at it as a throughput question. How do we transport X tonnage from pt A to pt B? What’s more efficient? One truck with more axles or two separate trucks, with fewer, for example; taking into consideration roadwear, tire wear, bridge capacity, etc.
- smolder 3y agoFewer vessels for fewer total trips is the more efficient option as a rule. See: cargo trains and gigantic container ships. Australia has some super long cargo trucks they allow called road-trains, I think, which are justifiable if you can fit them onto roads. The thing that needs to be balanced in the case of # of axles is the cost of outfitting each truck with additional axles and associated suspension/braking hardware versus the savings in tire costs due to reduced wear on the larger number of tires.
- smolder 3y agoI wanted to add that there are a bunch of factors at play in this optimization problem that might not be obvious. For example, there are diminishing returns in reduced wear from distributing load over more tires at some point. More tires & rolling parts also tend to increase rolling resistance, even ignoring extra weight that tends to come with a more complex design. Another potential advantage of having more axles is to reduce the frontal area of the vehicle by arranging tires in the direction of travel instead of putting them side by side on the same axle. Frontal area is a big component of the drag on a vehicle, along with speed and drag coefficient.
- dontlaugh 3y agoProbably a train. Doesn’t even need to carry its own electricity source.