4 ms·
Are you allowed to use phase to double or quadruple the effective signal "density" in the bandwidth? Or, is that part of the 2.8khz no matter how you "time" it?
by ggm 3y ago
Are you allowed to use phase to double or quadruple the effective signal "density" in the bandwidth? Or, is that part of the 2.8khz no matter how you "time" it?
(Not a ham. In microwave point to point space, you can usually get two customers on a direction by exploring the space around the 360 clock for angle/phase of the signal being sent, horizontal vs vertical is not uncommon)
- jdiez17 3y agoYes, that's basically Quadrature Amplitude Modulation (QAM). You divide the "amplitude vs phase" 2D space into a grid of points (typically 4, 8, 16, 32, ...) and assign a code to each. That way you can send 2, 3, 4, 5, (...) bits per symbol. Of course, the downside is that you need a higher signal to noise ratio to resolve which point a symbol represents. Edit: fixed bits per symbol
- gorkish 3y agoWhat you are describing is antenna polarization, not phase. It seems another reply covered phase pretty well, but yes you are correct that you can also put more than one signal into the same bandwidth - so long as you are able to disambiguate them from one another. This can be done generally by 1) sending signals at different times but on the same frequency 2) sending signals at different frequencies at the same time (multiple carriers within the same bandwidth) or 3) sending separate signals between separate antennas at the same time and frequency. Using antennas with different polarity is a crude and simple form of spatial multi access, but as it turns out, it’s not the only way. This is the trickery behind how sm-ofdm / mimo and other spatial modulations multiply their spectral efficiency, with current state of the art being around 20 bits per second per hz in 8x8 configurations.
- pclmulqdq 3y agoThere are a few attempts today to combine polarization with QAM to effectively double data rates again without impacting SNR. You can have two polarizations of radio waves at any time (horizontal + vertical or left-handed + right-handed), and each of these polarizations can carry separate QAM-modulated data. Supposedly this all also works with MIMO as long as you have the appropriate antennas.
- gorkish 3y agoSpatial division works regardless of whether the antennas self interfere; it works better when they don't. Overlapping two polarity-isolated qam signals is a good way to explain rudimentary spatial multiplexing but the current state of the art is way way beyond that, I'm pleased to say.
- lxe 3y agoYes. I'm pretty sure P25 and DMR are phase modulation modes. And nothing (bureaucratic, at least) is preventing experimental phase modulation modes from what I understand.