3 ms·
For regular buildings, the differences between 99.5%, 99.6%, etc. mostly matter to the supplier's Marketing Dept. and Sales Dept. (Vs. whoever's in charge of H
by bell-cot 3y ago
For regular buildings, the differences between 99.5%, 99.6%, etc. mostly matter to the supplier's Marketing Dept. and Sales Dept. (Vs. whoever's in charge of HVAC for the building it's installed on.)
Though some of the other properties - especially withstanding ~1,000 °C - make it sound pretty useful for military equipment which might be facing weapon-grade lasers or nuclear fireballs.
- lm28469 3y ago> For regular buildings, the differences between 99.5%, 99.6%, etc. It's going to be <80% after a week in real life due to dust &co anyways
- bell-cot 3y agoReaction I: Point...but no way it'll be <80% after a week! Reaction II: OTOH, the article says zilch about the stuff being dirt-repelling, or trivial to clean. And considering just how bad the air often gets, in some of the world's largest cities...
- lm28469 3y ago> the article says zilch about the stuff being dirt-repelling They talk about "nanostructures", I read it as "dust traps" Just looking at my window stills give me a good idea of how they'll look if they're anywhere remotely close to a road, and that's in a "clean" western european city
- instagib 3y agoI was reading that in some humid areas they pipe out their grey water or fresh water and disperse it onto their roofs to combat radiant heat from the sun to keep homes cooler.
- WaitWaitWha 3y agoCan you give some references to this? I might have a place I could use this.
- instagib 3y agohttps://www.energy.gov/energysaver/radiant-cooling%0A%0A https://www.energy.gov/energysaver/radiant-cooling%0A%0A https://handbook.ashrae.org/Handbooks/A15/IP/a15_ch54/a15_ch54_ip.aspx%0A%0A https://handbook.ashrae.org/Handbooks/A15/IP/a15_ch54/a15_ch... https://aircondlounge.com/is-radiant-cooling-efficient/ https://aircondlounge.com/is-radiant-cooling-efficient/ https://diy.stackexchange.com/questions/847/would-putting-a-sprinkler-on-my-roof-help-cool-my-home https://diy.stackexchange.com/questions/847/would-putting-a-... There’s some YouTube videos also. Radiant cooling.
- lostlogin 3y agoInstallation method is going to make more difference than that too I’d have thought.
- joosters 3y agoWhat the article needed was a comparison with 'normal' white paint, otherwise reporting 99.6% is not meaningful. The linked story https://newatlas.com/materials/super-white-paint-teflon-98-suns-heat/ https://newatlas.com/materials/super-white-paint-teflon-98-s... mentions that traditional paint reflects 85% of solar radiation. 85% -> 99.6% is an improvement, but not like a game-changer.
- bell-cot 3y ago85% -> 99.6% is a ~35X reduction is absorbed solar energy. Definitely a game-changer. (Assuming it holds up in real-world use, etc.)
- jerf 3y agoNo, it isn't necessarily. 99.6% to 99.9999996% would be a "one million X" reduction in absorbed solar energy, but it would be of no consequence whatsoever because it would be well below the noise floor of any useful effect (see other people's comments about dust, etc.). The multiplicative factor of the reduction itself is not the relevant thing here. The real effect on a building would have to be measured.
- 4gotunameagain 3y agoyes, but when buildings painted white already get warm from sunlight, we can safely say that a ~35x reduction will be meaningful, as opposed to the example you provided where there will be no observable effect as you correctly pointed out.
- hinkley 3y agoRoofing your house in a fire prone area. Combined with hardyboard siding and you could survive quite a bit.
- jonhohle 3y agoRoofing tile was the first thing I thought of as well. In Phoenix having a ceramic, heat tolerant, moldable, reflective material seems optimal for tiled roofs, or even as an addition to flat roofs. I wonder if it can be used in spray applications like other ceramic coatings.
- carreau 3y agoWhile I agree this is marketing stunts in general, sometime the difference between 99.5 and 99.6 reemission is 0.5 vs 0.4 percent absorption. so one way of seeing it the second one is 20% better than the first one at not heating the building. This is often the case for percentages "close" to 100%, e.g: with LED efficiency, for powerful LEDs the problem is not the quantity of light emitted but dissipating the heat that may need active cooling, so what may look like a few percent improvement is luminosity may actually be a much stronger decrease of the size of active cooling, Or semi-transparent mirrors in physics, where you really make a difference between 99.95 and 99.96% reflectance, because what you really look at the transmitance.
- Aeroi 3y agoYeah, I mean how does this material actually perform on a roof? Is there a measurable difference in the marginal gain of 95% to 99.6% when analyzing inside temperature of a house or energy reduction as a result? There seems to be many factors when looking at the actual cause and effect especially when cost is introduced.