3 ms·
> Looking at the Wikipedia page I get the impression that the new naming simply ignores the x1 links. Yes, and that probably makes some sense: All compliant US
by lxgr 3y ago
> Looking at the Wikipedia page I get the impression that the new naming simply ignores the x1 links.
Yes, and that probably makes some sense: All compliant USB-C cables (other than USB 2 only) need to have two high-speed lane pairs, i.e. four high-speed lanes in total. (I'm not sure why that's the case, i.e. whether the aim was to avoid further confusion or if it's required for orientation-reversible operation in some ports).
Whether the host/device actually support lane bonding or not is arguably not really the cable's choice, so it makes some sense to specify whatever the cable would support in an optimal configuration (i.e. maximum number of lanes used at the maximum supported modulation rate).
- archagon 3y agoBut you also need to know how fast your USB will be if you’re using DP alt mode in 2 lane mode.
- lxgr 3y agoYes, but "USB 10Gbps (except if using 1-2 lanes of DP alt mode; then USB 5Gbps)" is probably a bit too much text for a USB-C plug. And with USB 4 and dynamic bandwidth sharing between USB and DisplayPort on the same physical bus this would get even more complicated.
- archagon 3y agoIn that sense, I think the Gen1x1/1x2 terminology was a bit more informative. Though still completely terrible.