4 ms·
That’s a good idea! In fact, it’s been requested a few times so I think Rev 4 will have card-edge connectors to do thar
by a_rabid_squid 3y ago
That’s a good idea! In fact, it’s been requested a few times so I think Rev 4 will have card-edge connectors to do thar
- jacquesm 3y agoCool, do keep me posted please, email in profile. Very nice project!
- nerpderp82 3y agoDo you have a tracking bug for this? I could see PCIe pcb edge on the top and left with female straddle mount recepticles on the bottom and right. Another option would be something like pmod, fewer pins available but cheap and easy.
- a_rabid_squid 3y agoNot yet, but feel free to open one here: https://github.com/Architeuthis-Flux/Jumperless/issues https://github.com/Architeuthis-Flux/Jumperless/issues It would be nice to hear a bunch of ideas about it, because at this point I haven't given it too much thought. My thinking is to use something like this, maybe with a separate tiny PCB to connect between both boards because I don't want to mess up the general outline of the board.
- jacquesm 3y agoThe best possible version of this that I can imagine would allow for two boards to mate in all possible directions, you might want to go with a 'slave' expansion board that ties on to the first module in E/S/W but not N, another alternative would be to physically connect them to each other resulting in immediate connections between all boards. Lots of possibilities here. Something like i^c might help connecting the boards on a very cheap bus to allow for the configuration and read-out of slave boards, higher speed interaction would require a free set of 'edges' that can be connected between adjacent boards.